What is the 0-100 km/h acceleration time of the Tiggo 8 Kunpeng Edition?

1 Answers
MacRemington
07/28/25 9:33pm
According to official data, the Tiggo 8 Kunpeng Edition comes in two models: 1.6T and 2.0T. The 1.6T two-wheel drive model accelerates from 0 to 100 km/h in 8 seconds, while the 2.0T four-wheel drive model achieves it in 7.5 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents the strength of the force. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. For example, the Range Rover Evoque has a maximum torque of 320 Nm and accelerates from 0 to 100 km/h in 9.6 seconds. In contrast, the Tiggo 8 Kunpeng Edition 2.0T boasts a torque of 390 Nm and achieves the same in 7.5 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Tiggo 8 Kunpeng Edition is equipped with a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the Range Rover Evoque has a power-to-weight ratio of 100 Hp/T and accelerates from 0 to 100 km/h in 9.6 seconds. The Tiggo 8 Kunpeng Edition, with a power-to-weight ratio of 160 Hp/T, accomplishes the same in 7.5 seconds.
Was this review help?
2
1
Share
More Forum Discussions

Is the Volkswagen Jetta a Domestic or Joint Venture Car?

The Volkswagen Jetta is a joint venture car. Below are the specific details about the Volkswagen Jetta: 1. Positioning: The Jetta is a compact family sedan jointly produced by China FAW Group Corporation and Volkswagen Group. 2. Classification: The Jetta Dream Edition model has minimal differences in appearance compared to the current model, with the main distinctions being the addition of chrome grille decorations and the upgrade to 185/60R15 tires + 15-inch wheels for the Fashion trim. 3. Powertrain: The Jetta offers two engine options: a 1.4L and a 1.5L. The 1.4L engine delivers a maximum power of 66kW (90PS) and a maximum torque of 132Nm, paired with a 5-speed manual transmission. The 1.5L engine produces 80kW (110PS) and 150Nm, available with either a 5MT or an Aisin 6AT transmission.
15
3
Share

Where is the Alto turn signal fuse located?

The Alto commonly has two sets of fuses. The first set of fuses is located under the dashboard, specifically beneath the beige plastic panel above the clutch. To access it, first remove the beige plastic panel by applying slight upward force. The second set of fuses is located in the engine compartment, next to the battery. Press the fuse box cover to the left to remove it. More details are as follows: 1. Function: The fuse primarily serves to protect the circuit. When the circuit temperature is too high or the current is excessive, the fuse will blow to safeguard the circuit. The car's fuse box contains many fuses and relays. When a fuse blows, certain functions of the car may be affected. If a fuse blows, car owners need to replace it with a new one. 2. Replacement details: On the cover of the fuse box, there are labels indicating the function and code of each fuse, making it easy for car owners to quickly locate the blown fuse. Replacing a fuse is very simple, even easier than changing a tire. Inside the fuse box, there is a small clip that can be used to remove the fuse. Then, simply insert a new fuse in its place. When replacing a fuse, never use your fingers to pull it out; always use the dedicated clip to remove the fuse.
8
5
Share

How to Turn Off Mercedes-Benz Auto Start-Stop?

Mercedes-Benz's auto start-stop system generally comes with a switch. If the owner does not wish to use it, they can simply press this switch to directly turn off the auto start-stop system. Relevant details are as follows: 1. Working Principle: The start-stop system works by detecting when the vehicle stops moving due to traffic congestion or at intersections. The driver presses the brake pedal and shifts to neutral. At this point, the Start/Stop system automatically checks: the engine is idling and not in gear; the wheel speed sensors of the anti-lock system show zero; the electronic battery sensor indicates there is sufficient energy for the next start. 2. Operation: Once these three conditions are met, the engine automatically stops. When the traffic light turns green, the driver presses the clutch, and the "start-stop device" can be activated immediately to quickly start the engine. In automatic transmission models, as soon as the brake is released or the steering wheel is turned, the engine automatically restarts, allowing the driver to press the accelerator and move off, all while remaining in D gear.
1
0
Share

How Does Isuzu Solve the DPF Regeneration Issue?

Qingling Isuzu's DPF light indicates the particulate filter warning light. When this light is on, the driver needs to provide an opportunity for regeneration by changing the engine load to initiate stationary regeneration. Switch the vehicle speed to a higher speed cycle (engine speed increased to above 1600 rpm), and after approximately 20 minutes, this indicator light will turn off, indicating the completion of active regeneration. DPF can regenerate automatically: When the DPF color displays green, no manual intervention is required. This state generally occurs when the vehicle is driving at high speed (above 80 km/h). Continue maintaining normal driving conditions, and once the particulate matter is processed, the DPF indicator light will automatically turn off. DPF can regenerate manually: The DPF yellow indicator light will flash, which usually occurs when the vehicle is driving at low speeds below 80 km/h. In this case, promptly move away from the road, flammable, and explosive materials. Once the vehicle is stationary, shift to neutral, engage the handbrake, and press the DPF control button. The yellow indicator light will remain steadily lit during this state, and the processing time is approximately 15-30 minutes. Once the particulate matter is processed, the indicator light will automatically turn off.
18
4
Share

What is the relationship between Isuzu and Suzuki?

Although both companies are Japanese automobile manufacturers, they are not the same company. Suzuki Corporation: Established in 1920, headquartered in Hamamatsu City, Shizuoka Prefecture, Japan, with the English name SUZUKI. Mainly produces automobiles, motorcycles, outboard motors, motorboats, elevators, etc. Isuzu Motors Limited: Established in 1937, headquartered in Tokyo, Japan, with the English name ISUZU. Mainly produces pickup trucks and trucks. Subsidiaries in China: Among them, Jiangxi Changhe Suzuki Co., Ltd. and Jiangxi Isuzu Motors Co., Ltd., both established in Jiangxi, are also easily confused. Jiangxi Changhe Suzuki Automobile Co., Ltd. is a Sino-Japanese joint venture established in June 1995 by Jiangxi Changhe Aviation Industry Co., Ltd., Jiangxi Changhe Automobile Co., Ltd., Suzuki Motor Corporation of Japan, and Okaya & Co., Ltd. of Japan. Jiangxi Isuzu Motors Co., Ltd. was established in April 2013 as a strategic investment project of Isuzu Motors Limited in China, mainly producing Jiangxi Isuzu pickup trucks.
18
3
Share

What to Do When Car Seat Cushions Get Wet from Rain?

When car seat cushions get wet from rain, you can remove the seat covers or use a towel to wipe them dry. Here are detailed methods for dealing with wet car seat cushions: Remove the seat covers: If the car seats have covers, remove them immediately. Keeping the covers on prevents ventilation, making it harder for the wet seats to dry and increasing the risk of mold formation. Wipe with a towel: For leather seats, use a clean towel to wipe them dry. To prevent unpleasant odors and corrosion caused by rainwater, it's best to clean the seats with cleaning products before wiping them dry. Use warm air: Turn on the car's heater to raise the temperature inside the cabin and help dry the wet seats. Maintain ventilation for natural drying: Frequently open the car windows to keep the cabin ventilated, allowing the wet seats to dry naturally. Air dry: When possible, open all the car doors and park the car in a sunny spot (avoid direct sunlight for leather seats) to let the wet seats dry. Remove the seats: If the seats are severely wet, remove them and place them in a ventilated area or under sunlight to dry. This prevents prolonged dampness, which can lead to mold and deterioration.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.