···
Log in / Register

What is the 0-100 km/h acceleration time of the Teana?

4 Answers
DelWalter
08/26/25 4:30am

According to official data, the Teana's 0-100 km/h acceleration time is 9.76 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in naturally faster acceleration. The Accord has a maximum torque of 260 Nm with a 0-100 km/h acceleration time of 8.8 seconds, while the Teana has a maximum torque of 197 Nm with a 0-100 km/h acceleration time of 9.76 seconds. Transmission efficiency: The transmission is the medium for power transfer and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Teana is equipped with a CVT continuously variable transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Accord has a power-to-weight ratio of 184 Hp/T with a 0-100 km/h acceleration time of 8.8 seconds, while the Teana has a power-to-weight ratio of 107 Hp/T with a 0-100 km/h acceleration time of 9.76 seconds.

Was this review help?
5
5
Share
VonHaley
09/08/25 5:56am

I've driven the Nissan Teana a few times, and its 0-100 km/h acceleration time is around 9 seconds, depending on the specific model. For example, the 2023 2.0L naturally aspirated engine version was measured at approximately 8.8-9 seconds. This car is not performance-oriented; it drives smoothly and comfortably, with the CVT transmission ensuring a jerk-free acceleration process. It's more than adequate for daily overtaking, especially on city roads where it starts smoothly from traffic lights. In a class comparison, the Honda Accord is slightly faster at around 8 seconds, but the Teana focuses more on quietness and fuel efficiency, with good seat support for long-distance driving, making it less tiring. If speed is a concern, I recommend test-driving it to feel its response in different road conditions. Acceleration may be slightly slower in rainy weather or when fully loaded, but overall, it doesn't affect practicality. For safe driving, gradual acceleration actually reduces the risk of accidents, making it a wise choice that balances daily needs.

Was this review help?
7
0
Share
Expand All
DelZachary
10/22/25 6:00am

The Nissan Teana's 0-100 km/h acceleration averages 9 seconds, which is quite standard for a family-oriented mid-size sedan. Having driven comparable models like the Toyota Camry and Mazda6, the former accelerates in 9.2 seconds while the latter in 8.7 seconds, showing minimal difference. The Teana's 2.0L engine delivers smooth power output suitable for urban commuting, and its CVT transmission is designed for seamless operation—prioritizing fuel efficiency and quietness over explosive power. When considering this car, the focus should be on comfort and economy; slightly slower acceleration actually contributes to lower fuel consumption. For highway overtaking, simply apply throttle in advance—safety first, no need to rush—it offers stable performance for daily commuting. Among its competitors, the Camry is slightly slower in acceleration but offers similar space, while the Accord is quicker but noisier; the Teana strikes a middle ground with reasonable pricing and affordable maintenance, making it an excellent long-term driving companion.

Was this review help?
20
3
Share
Expand All
MacElle
12/05/25 6:24am

Test drove the Teana with a 0-100km/h acceleration of about 8.9 seconds. The 2.0L naturally aspirated engine delivers 160 horsepower with linear power delivery, paired with a CVT transmission for smooth transitions. Weighing around 1.4 tons, the acceleration isn't particularly fast but is sufficient, with no sluggishness when starting from traffic lights. Overtaking requires some planning ahead. In its class, the Mazda6 accelerates slightly faster, but the Teana offers quieter operation and stronger practicality. The engine tuning is steady, promoting safe driving by avoiding sudden acceleration, which also reduces tire wear. Overall, it offers high value for money with no issues for daily driving.

Was this review help?
18
2
Share
Expand All
More Forum Discussions

What is the EGP fault in the engine?

Engine EGP refers to a fault in one or both of the two temperature sensors, involving either the circuit or the internal components of the sensor itself. This fault may be caused by a short circuit, an open circuit, or a malfunction in the temperature sensor. Solution reference: Replace both sensors. Exhaust processor: The exhaust processor is equipped with two catalytic converter temperature sensors and one NOX sensor. The two temperature sensors are located at the inlet and outlet of the catalytic converter, respectively referred to as the inlet and outlet temperature sensors. Main function: The main function is to detect the temperature of the exhaust gases emitted by the engine. When the detected exhaust temperature exceeds 200°C, the engine's electronic control unit receives this signal and sends corresponding execution signals to the metering injection pump to control the injection of a certain amount of urea solution into the exhaust pipe. The urea solution decomposes into NH3 when heated, and NH3 reacts with NOX in the exhaust gases to produce non-polluting N2 and H2O.
11
0
Share

What Causes the Handbrake Light to Occasionally Illuminate While Driving?

The reasons for the handbrake light occasionally illuminating while driving are as follows: Severely Worn Brake Pads: Brake pads are divided into two types: those with sensor lines and those without. Brake pads with sensor lines will automatically complete the circuit when worn to the limit, triggering the warning light. Brake pads without sensor lines do not provide an automatic alert but produce a hissing "metal-on-metal" sound to indicate that they need replacement. Low Brake Fluid Level: Brake fluid plays a crucial role in the vehicle's braking system. When the driver presses the brake pedal, the force applied is transmitted by the master cylinder piston through the brake fluid to the individual wheel cylinders, causing the brake pads to contact the wheels and stop the vehicle. Insufficient brake fluid is often accompanied by noticeably reduced braking power and, in severe cases, a complete loss of braking force. This issue can be resolved by promptly replenishing the brake fluid.
15
2
Share

What does the STOP light on the Elysee mean?

The illuminated STOP light on the Elysee may indicate abnormalities in the braking system, engine oil pressure, or coolant temperature. If this light comes on while the engine is running, you must stop immediately and turn off the engine. Here is more information about the Elysee: 1. Model series: The new Elysee is a "global new-generation European mid-size car" that Citroen has developed with a global perspective, leveraging a century of automotive technology resources and the latest technological innovations. 2. Exterior: The Elysee's exterior design combines French elegance and stability with modern fashion and dynamism, appealing to most people's aesthetics. 3. Interior: The new Elysee features a new design, with a "Elegant Gray" interior tone that uses a mix of light and dark colors, creating an overall style that is simple, fresh, and elegant. The dashboard is designed to favor the driver, providing a better experience.
4
5
Share

What Does the Rear Bumper Assembly Include?

The rear bumper assembly includes the rear bumper body, mounting components, and elastic snap-in seats. Mounting Components: These consist of a mounting head and a mounting post vertically connected to the center of the mounting head. The rear bumper body is equipped with through-holes that match the mounting posts. The snap-in seats have blind holes along the axial direction that are compatible with the mounting posts. The mounting posts pass through the through-holes and engage with the blind holes to secure the snap-in seats to the rear bumper body. The mounting head is designed to abut against rubber buffer blocks fixed to the tailgate. Bumper: It absorbs and mitigates external impacts, protecting the front and rear of the vehicle body. Snap-in Seats: They can withstand significant forces, enhancing the connection strength between the rear bumper body and the support bracket. The mounting posts extending into the blind holes of the snap-in seats ensure a Y-direction tightening effect. When the tailgate is closed, the rubber buffer blocks directly contact the mounting head, preventing collision damage to the rear bumper body.
6
0
Share

How often should the oil be changed for a MAN engine?

It is necessary to specifically observe the oil properties of your engine model. Oil change intervals: For fully synthetic oil, change every 8,000-10,000 km; for semi-synthetic oil, change every 5,000-8,000 km; and for mineral oil, change approximately every 5,000 km. With advancements in oil technology, the oil change intervals have been continuously extended. Long-lasting oil is a technical goal pursued by both automobile and oil manufacturers. Replacement factors: Oil degradation leads to a decline in oil performance and lubrication protection, exacerbating engine wear. Oil has a lifespan, which is the oil change interval. Oil degradation is essentially influenced by oil oxidation, making regular oil changes very necessary. Inspection during replacement: Under normal circumstances, check the oil level daily during the break-in period and weekly after the break-in period. Every time the oil is changed, a new oil filter element must be installed.
13
4
Share

Within how many years must a motorcycle driver's license be obtained?

A motorcycle driver's license must be obtained within three years. Reason for the three-year completion period: According to Article 38 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the validity period of the driver's license application is three years. Applicants must complete the Subject 2 and Subject 3 tests within this validity period. Examination content for a motorcycle driver's license: Subject 1 and Subject 4 are theoretical tests, covering knowledge of road traffic safety laws and regulations, as well as safe and civilized driving practices. During the test, 50 questions are randomly selected from the question bank, with each question worth 2 points, totaling 100 points. A score of 90 or above is required to pass. Subject 2 assesses skills such as riding over a single-plank bridge, weaving around cones, and stopping and starting on a slope. Subject 3 test content is determined by the local provincial traffic management authorities and does not have a unified standard.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.