What is the 0-100 km/h acceleration time of the Reiz?

Does the Focus have an anti-collision steel beam?

The Focus is equipped with an anti-collision steel beam. The high-strength anti-collision steel beam built into the front bumper of the Focus is made of hot-pressed ultra-high-strength steel plate imported from a Swedish stamping factory, with a tensile strength of 980Mpa. The front corrugated steel plate is specifically designed to absorb energy, and its effectiveness is superior to that of non-corrugated steel plates. Behind the steel plate, there is also a square steel beam structure that can resist impact, while the structure connecting to the car body can also absorb and cushion the impact. The Focus is a compact car under Changan Ford. Taking the Focus 2021 Sedan 1.5L Manual Fengyue model as an example, the car body adopts a 4-door, 5-seat structure with a fuel tank capacity of 53 liters. In terms of power, the Focus 2021 Sedan 1.5L Manual Fengyue model is equipped with a 1.5L inline three-cylinder naturally aspirated engine, with a maximum power of 90kW and a maximum torque of 153Nm, matched with a 6-speed manual transmission.

8

0

Share

Why is there no sound in the Roewe RX5 navigation system?

The Roewe RX5 navigation system may have no sound due to loose wiring caused by vehicle vibration during driving, or it could be a damaged navigation device. Below are relevant details: 1. Features: The Roewe RX5 is equipped with the Zebra Zhixing multimedia system version 2.0, offering rich human-machine interaction capabilities. Mainstream configurations are concentrated in mid-to-high trim models, while low-to-mid trim models still target family consumers. 2. Actual fuel consumption: The Roewe RX5 has a combined fuel consumption ranging between 6.8–10.0L, which is relatively good. Actual fuel consumption may vary depending on vehicle usage conditions and driving habits. 3. Model comparison: The Roewe RX5 has two displacement models: 1.5L and 2.0L, with a total of 19 different configuration versions available for consumers to choose from.

19

1

Share

Can Alcohol Be Added to Windshield Washer Fluid?

Alcohol should not be added to automotive windshield washer fluid. The main reasons are: 1. Alcohol is a flammable substance with strong volatility. 2. The vapor it releases can form an explosive mixture with air. If exposed to high temperatures or open flames, it may cause combustion or explosions, leading to severe consequences. Additional Information: The functions of automotive windshield washer fluid include: 1. Antifreeze properties: It significantly lowers the freezing point of the liquid, thus preventing freezing and quickly dissolving frost. 2. Anti-fog properties: It forms a monomolecular protective layer on the glass surface, preventing fog droplets and ensuring clear visibility. 3. Anti-static properties: After cleaning with the fluid, substances adsorbed on the glass surface eliminate static charges, providing anti-static effects. 4. Lubrication properties: Its higher viscosity provides lubrication, reducing friction between the wiper and glass to prevent scratches. 5. Anti-corrosion properties: The fluid contains various corrosion inhibitors, making it safe for all metals, car paint, and rubber without any corrosive effects.

5

Share

What car is Monet Blue?

Monet Blue refers to the Tank 300. The Tank 300 Monet Limited Edition further enhances the model's fashion attributes, with the addition of Monet's tender blue color, breaking the stereotype that 'off-road vehicles can only be rugged'. Relevant details are as follows: 1. Interior: The interior features a blue and black color scheme with a premium feel. In addition to the exterior's 'Tender Blue' inspired by Monet, the Tank 300 Monet Limited Edition's interior is also custom-designed with a blue and black color scheme. The combination of premium black and blue stripe design elevates the interior style of this new 'Tank' model. Details such as geometric textures on the door panels and center console, along with limited-edition badges, enhance its overall premium appearance. 2. Functionality: The Tank 300 Monet Limited Edition also inherits luxurious features. The 12.3-inch dual-screen display, aviation-style push gear lever, and aircraft turbine-style air vents not only create a futuristic and industrial feel but also offer excellent practicality. The 12.3-inch dual-screen display supports information such as altitude, air pressure, and weather conditions, providing valuable assistance during road trips. The aviation-style push gear lever is surrounded by neatly arranged functional buttons, including features like four-wheel drive, differential lock, and snow mode, among other practical functions.

1

0

Share

What is the normal tire pressure for the Edge?

The normal tire pressure range for the Edge is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. When one or more tires are significantly underinflated, a warning light will illuminate. If the low tire pressure warning light comes on, you should stop and check the tires as soon as it is safe to do so, and inflate them to the correct pressure. Generally, a tire pressure above 2.8 bar is considered too high, and a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and misalignment, reducing driving comfort; accelerates localized wear of the tread center, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; causes excessive stretching and deformation of tire cords, reducing tire elasticity and increasing the load on the vehicle while driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and misalignment, compromising driving safety; increases movement of tire components, leading to abnormal heat generation due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically, it will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, the tire pressure was not reset in time, causing the system to still record the previous data, which triggers the tire pressure monitoring indicator light. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure warning light. For sensor damage, the only solution is to replace it with a new one.

1

Share

Where is the ETC usually installed?

The installation position of the ETC for small cars is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with anti-explosion film or those that have been retrofitted with anti-explosion film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave skylight area. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for an ETC, you need to provide the original and photocopies of the vehicle owner's valid ID card and vehicle registration certificate. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are some precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing area is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic toll deduction for the wrong vehicle. The ETC lane recognition speed is 20 kilometers per hour; driving too fast may result in failure to read the vehicle's device information and thus failed toll deduction. When using a debit card linked to ETC, insufficient balance may also lead to failed toll deduction.

13

1

Share

What is the 0-100 km/h acceleration time of the Reiz?

Does the Focus have an anti-collision steel beam?

Why is there no sound in the Roewe RX5 navigation system?

Can Alcohol Be Added to Windshield Washer Fluid?

What car is Monet Blue?

What is the normal tire pressure for the Edge?

Where is the ETC usually installed?

What is the best method to remove rust from a car radiator?

How to Remove Adhesive Residue from Car Window Film?

Where is the Wrangler SUV produced?

Is the left turn signal down or up?