What is the 0-100 km/h acceleration time of the Porsche 918?

1 Answers
MacDaisy
07/30/25 9:46am
According to official data, the Porsche 918 accelerates from 0 to 100 km/h in 2.6 seconds, while the Porsche 992 model achieves this in 3.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in naturally faster acceleration. The Porsche 918 has a maximum torque of 585 Nm, achieving 0-100 km/h in 2.6 seconds. The Porsche 992 has a torque of 530 Nm, with a 0-100 km/h time of 3.8 seconds. Transmission efficiency: The transmission is the medium for power delivery, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Audi A6's transmission is a 7-speed dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Porsche 918 has a power-to-weight ratio of 1340 Hp/T, achieving 0-100 km/h in 2.6 seconds. The Porsche 992 has a power-to-weight ratio of 285 Hp/T, with a 0-100 km/h time of 3.8 seconds.
Was this review help?
6
4
Share
More Forum Discussions

How to Turn Off the Maintenance Reminder on the Lavida?

Method to turn off the maintenance reminder on the Lavida: 1. Turn off the key, at which point the dashboard lights will go out; 2. Then, press and hold the maintenance reset button while turning the key to the on position. Wait a moment, and the maintenance cycle indicator will display normally; 3. Turn the key off and then back on to test whether the reminder has been successfully turned off. If not, repeat the process. In terms of body dimensions, the Lavida measures 4600 mm in length, 1700 mm in width, and 1500 mm in height, with a wheelbase of 2610 mm. Exterior-wise, the Lavida's front fascia design differs significantly from previous Volkswagen A-segment models, particularly its unique teardrop-shaped headlights. The traditional Volkswagen family grille and U-shaped front design are also carried forward and inherited in the Lavida.
8
0
Share

How to Extract Oil from a Small Car?

Methods for extracting oil from a small car: 1. Prepare a transparent plastic hose about two meters long, not too thick, as a thick hose will make it difficult to extract the gasoline; 2. Open the fuel tank cap of the car. Under the driver's foot mat, there are two switches—one for the trunk and another for the fuel tank opening mechanism. Insert the plastic hose into the tank; 3. After inserting the hose into the fuel tank, take a strong sip from the hose (be careful not to ingest gasoline), then direct the hose into an oil container. The container should be placed below the fuel tank's gasoline level, and the gasoline will slowly flow out continuously. This principle relies on balancing the liquid levels between the two containers.
12
5
Share

What are the symptoms of a damaged EGR valve?

egr valve damage symptoms: extremely unstable idle or even stalling, malfunction indicator light flashing, failing annual emission inspection, burning engine oil, blue smoke from exhaust; when the EGR valve remains open, the car may exhibit black smoke, lack of acceleration power, and increased fuel consumption; when the EGR valve remains closed, it can affect the vehicle's exhaust emissions, potentially causing it to fail the annual inspection. Causes of EGR valve damage: 1. Quality issues with the exhaust gas recirculation system itself; 2. Improper maintenance; 3. Fuel quality problems; 4. Aging of the wastegate valve. The function of the EGR valve is to appropriately reduce fuel consumption, improve engine efficiency, lower exhaust temperature, and reduce the formation of nitrogen oxide compounds and carbon monoxide.
9
5
Share

Why Does the Car Always Pull to One Side While Driving?

The reasons why the car always pulls to one side while driving: The four-wheel alignment data is inaccurate, so it is recommended to perform a four-wheel alignment. During normal driving, passing over bumpy roads or speed bumps can cause the four-wheel alignment data to become inaccurate, so regular four-wheel alignments are necessary. If the shock absorbers or suspension arms are disassembled during car repairs, a four-wheel alignment must be performed again after installation; otherwise, the car may pull to one side, and the tires may wear unevenly. In addition to four-wheel alignment, wheel balancing is also necessary for the car. Wheel balancing is specific to the wheels. If wheel balancing is not performed for each wheel, abnormal vibrations may occur during high-speed driving, significantly affecting the car's stability at high speeds.
16
4
Share

What is the appropriate tire pressure for the Edge?

The appropriate tire pressure for the Edge is 2.4 bar. The tire pressure value ranges from 2.4 to 2.8 bar, and as long as it falls within this range, it is safe. Generally, the tire pressure for most passenger cars is around 2.3 to 2.5 bar. Strictly speaking, tire pressure refers to the air pressure inside the tire. Tire pressure is like the blood pressure of a car, and its level has a significant impact on the car's performance and power. The Edge is a mid-size crossover SUV model under Ford, built on the Ford CD3 platform. The CD3 platform belongs to Ford's global mid-size car platform, featuring both front-wheel drive and four-wheel drive configurations. In terms of body dimensions, the Edge measures 4878 mm in length, 1925 mm in width, and 1770 mm in height, with a wheelbase of 2850 mm.
7
5
Share

What are the requirements for booking Subject 1 test?

To book the Subject 1 test, it is mandatory to complete the required study hours. For Subject 1, you need to complete 12 study hours. A maximum of 4 hours can be completed in one day, and the fastest you can finish is in 3 days. You can book the Subject 1 test at the driving school where you registered, or you can book it yourself through the mobile app "Traffic Management 12123". Booking steps: Open the "Traffic Management 12123" mobile app and enter the homepage; After entering the main interface, click "More" to enter the business center; Find and click on "Driver's License Services"; In the "Driver's License Services" interface, find and click on "Exam Booking"; Then follow the app's instructions step by step to complete the exam booking. Subject 1 exam booking rules: For first-time bookings of Subject 1, the sorting time is based on the initial application date for the driver's license or the application date for additional driving qualifications. For non-first-time bookings, the sorting time is based on the date of the last exam. Users who successfully book an exam but cancel the booking due to personal reasons will have the cancellation time as their sorting time. If the exam cannot be taken for non-personal reasons, the sorting time remains unchanged.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.