What is the 0-100 km/h acceleration time of the Nissan Qashqai?

1 Answers
StMicah
07/29/25 6:58am
Nissan's new Qashqai 2.0L model has a 0-100 km/h acceleration time of 10.53 seconds. Below is relevant information: Introduction: The Qashqai, the first creation of Nissan's European Design Center, derives its name from the nomadic tribes inhabiting desert regions in Iran, meaning "urban nomad." It is positioned between a compact SUV and a hatchback. Additional Information: The Nissan Qashqai is equipped with a 2.0-liter engine, model code MR20DE, which is essentially the same as the engine used in the Nissan Sylphy. It delivers a maximum power of 139 horsepower and a peak torque of 198 Nm, offering moderate performance. Of course, the highlight of the powertrain isn't just the engine but also the transmission it's paired with.
Was this review help?
20
1
Share
More Forum Discussions

What is the Difference Between a Radar Detector and a Dash Cam?

The primary difference between a radar detector and a dash cam lies in their functions. A radar detector uses GPS navigation positioning and radar signal detection to alert drivers in advance about the presence of speed monitoring devices or speed traps, helping them avoid penalties and demerit points due to speeding violations. On the other hand, a dash cam records high-definition video and audio of the driving journey, serving as crucial evidence in the event of an accident. How to Choose a Dash Cam: Resolution: When purchasing a dash cam, the most important factor is the clarity of the recorded footage. Higher resolution ensures clearer images. It is also recommended to opt for dash cams with high-quality camera lenses. Reliability: Reliability is another key consideration. Ensure the dash cam you choose does not suffer from unstable performance due to quality issues. Field of View: Select a dash cam equipped with a wide-angle or panoramic camera. A narrow field of view may leave blind spots, compromising the completeness of the recording. Night Vision Performance: A dash cam should also have night vision capabilities to effectively record nighttime driving conditions. Battery: Pay attention to the built-in battery's quality and type. Common battery types for dash cams on the market include lithium-ion batteries, lithium polymer batteries, and supercapacitor batteries. Lithium-ion batteries are less heat-resistant and pose safety risks, so it is advisable to choose dash cams with lithium polymer or supercapacitor batteries.
6
5
Share

Do You Need to Press the Accelerator When Reversing?

Reversing does not require pressing the accelerator because the speed is very low during reversing. However, when adjusting speed during reversing, you should use the brake, as improper braking can cause the engine to stall. Therefore, reversing requires a combination of clutch and brake to control the speed. For manual transmission vehicles, under normal circumstances, you do not need to press the accelerator when reversing. As long as the clutch is used to control the speed, you can reverse into a parking space. However, there are special situations, such as when reversing on a slope, where you may need to give a little throttle to avoid stalling the car. If you are driving an automatic transmission car, you can use idle speed during reversing, and generally, there is no need to press the accelerator. Whether driving a manual or automatic transmission car, during reversing, you can use the car's reversing camera and rearview mirrors to observe obstacles around the car at all times to avoid collisions.
20
2
Share

What Octane Gasoline Should a Fuel-Injected Motorcycle Use?

When a motorcycle's displacement compression ratio is below 9.5:1, use 92-octane gasoline; when the compression ratio is above 9.5:1, use 95-octane gasoline. Vehicles with higher compression ratios should use 95-octane gasoline, while those with lower compression ratios should use 92-octane. The commonly referred-to 92, 95, and 98-octane gasoline represent the numerical values of the gasoline grade. The gasoline grade actually indicates the anti-knock value, which reflects stability under conditions of high compression ratio, high temperature, and high frequency. The higher the grade, the stronger the anti-knock performance, and the larger the compression ratio, the greater the power output. However, a larger compression ratio is not always better, as an excessively high compression ratio in gasoline engines can lead to abnormal combustion phenomena like knocking. Therefore, engines with higher compression ratios require gasoline with stronger anti-knock properties. Thus, the gasoline grade should match the engine's compression ratio—higher grades are not necessarily better.
9
1
Share

What does Volkswagen TSI stand for?

Volkswagen TSI represents the combined application of twin-charging and stratified direct injection technologies. TSI is the abbreviation for TurboFSI, where T stands for Turbocharging, S stands for Supercharging, and I stands for stratified direct Injection. TSI essentially means FSI with turbocharging, i.e., a direct injection engine equipped with a turbocharger. The TSI engine is a small-displacement turbocharged engine introduced by Volkswagen in Germany, featuring high engine efficiency that achieves a balance between power performance and fuel economy. It is widely used in Volkswagen's mid-to-low-end models such as the Golf, Magotan, Sagitar, Passat, and Bora. To highlight their technical features, these models display the TSI badge on the rear, indicating the use of a TSI engine. On Volkswagen TSI badges, you may also notice red letters. If only the letter I is in red, it denotes a displacement of 1.4T; if both S and I are red, it represents a 1.8T displacement; and if all three letters TSI are red, it signifies a 2.0T displacement.
7
2
Share

What is the concept of a liquidation car?

Liquidation cars refer to vehicles disposed of after a 4S dealership goes out of business. These cars are sold as bare vehicles without after-sales service, and maintenance needs to be done at other 4S dealerships. When a 4S dealership undergoes normal liquidation and closes down, all inventory is sold at discounted wholesale or retail prices. Vehicles sold this way are priced slightly lower than normal, but not significantly lower than regular promotional prices. Purchasing such liquidation cars is generally problem-free as they come with complete documentation. It's important to note that after a 4S dealership closes, other dealers of the same brand can still provide warranty services. Therefore, even if the 4S dealership closes, as long as the car manufacturer remains operational, the vehicle's warranty won't be affected. According to legal regulations, the warranty should be covered by either the manufacturer or the seller. If the seller goes out of business, you can contact the manufacturer directly.
3
5
Share

What is the wheelbase of the Hafei Saibao?

The wheelbase of the Hafei Saibao is 2440mm, with overall dimensions of 3945*1695*1695mm in length, width, and height. Both front and rear tires are sized at 185/65R147. Below are the detailed specifications of the Hafei Saibao: In terms of power, the vehicle is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission. It delivers a maximum power of 76kw, a maximum torque of 130Nm at 4500RPM, and a maximum horsepower of 103PS, with peak power achieved at 6000RPM. Regarding wheel brakes, some or all models of the Hafei Saibao feature a handbrake for the parking brake, front disc brakes, and rear drum brakes. The Hafei Saibao's front suspension is a MacPherson independent suspension, while the rear suspension is a multi-link independent suspension.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.