What is the 0-100 km/h acceleration time of the new Fit?

1 Answers
VonIan
07/30/25 4:45am
The Honda Fit's 0-100 km/h acceleration time is 8.79 seconds. For a compact car: For a naturally aspirated 1.5L compact car, 2000 rpm is a very low starting rotation speed. Besides the engine's good low-end torque, the transmission settings play a significant role in amplifying the torque effect. Full utilization of 1st gear: Starting in 1st gear, the rotation speed climbs from 2000 rpm to near the redline (6900 rpm), with the entire process lasting over 2.5 seconds. This is relatively long for a manual transmission model, indicating thorough utilization of 1st gear, which positively impacts acceleration performance. The short shift travel of the gear lever also helps save time during gear changes.
Was this review help?
12
3
Share
More Forum Discussions

What Causes a Cruze to Suddenly Emit a Large Amount of White Smoke?

If a Cruze suddenly emits a large amount of white smoke, it could be water vapor expelled while driving in low-temperature environments, which is a normal phenomenon. However, it could also be caused by excessively advanced ignition timing or an overly lean air-fuel mixture, resulting in white smoke. To determine the fault point, it is necessary to check the ignition timing advance angle and the air-fuel mixture concentration. Here is some additional knowledge: 1. Black smoke from a car: This is often due to the use of poor-quality fuel, such as accidentally filling up with low-quality gasoline containing many impurities, which reduces combustion efficiency and leads to black smoke. Alternatively, a clogged air filter can cause an overly rich air-fuel mixture, leading to insufficient oxygen supply to the engine and incomplete combustion. 2. Blue smoke from a car: This occurs when engine oil enters the combustion chamber, commonly referred to as 'burning oil.'
7
3
Share

How to File an Insurance Claim After Scraping Someone Else's Car?

First, call your insurance company to report the situation on the scene. Generally, insurance companies do not provide compensation if the incident is reported after 48 hours. The insurance company will send someone to the scene to conduct an inspection and issue an inspection report. If the damage is significant, the inspector may recommend reporting the incident to the traffic police for further handling. Take your vehicle to the designated loss assessment center specified by the insurance company or chosen by yourself. The insurance company will then assess the damage. After retrieving your vehicle, you need to gather all the necessary documents for the claim and submit them to the insurance company to process the claim. Once the insurance company receives all the required claim documents from you, they will calculate the repair costs and other related expenses. After completing the calculation, they will determine the claim settlement.
12
0
Share

Which Cars Require 98 Octane Fuel?

Cars with engine compression ratios of 10 or higher require 98 octane fuel, as these vehicles have higher fuel grade requirements; luxury cars or sports cars with sophisticated engine systems or complex electronic systems; vehicles whose fuel tank caps are labeled "Please use 95 octane or higher gasoline" should also use 98 octane fuel. Below is relevant information about 98 octane fuel: Advantages of 98 octane fuel: The advantages of 98 octane fuel are "two highs and two lows," meaning higher anti-knock performance and power output, while containing lower levels of harmful substances and producing less exhaust pollution. Vehicles suitable for 98 octane fuel: Due to its high octane rating and premium price, 98 octane fuel is primarily used by luxury cars and is often referred to as "noble gasoline." It is also defined as suitable for gasoline-powered vehicles with engine compression ratios above 11.6.
8
1
Share

What are the symptoms of a faulty car clutch?

Symptoms of a faulty car clutch are as follows:1. Burning smell from the clutch: When the clutch malfunctions, a distinct burning odor can be noticed. This is caused by the clutch disc slipping due to prolonged friction with the pressure plate and flywheel, resulting in sluggish acceleration and an overall decrease in the vehicle's power.2. Clutch shudder or abnormal noise: Specific symptoms include noticeable shaking when starting the car. When idling and gradually releasing the clutch while engaging a gear, the car may experience continuous jerking, resembling stop-and-go movements. Alternatively, when pressing the clutch, friction noises such as scraping sounds may be heard, indicating clutch failure.3. Incomplete clutch disengagement: This manifests as the vehicle not stopping even when the clutch is fully depressed, or the clutch becoming overheated. If these symptoms occur, it may be due to the clutch not completely cutting off the power from the driven disc. As a crucial component during vehicle operation, a faulty clutch not only compromises driving comfort but also increases driving risks. When encountering such issues, it is advisable to seek timely repairs to resolve them.
4
1
Share

What was the brand of China's first domestically produced automobiles in July 1956?

In July 1956, the First Automobile Works was completed and put into production. On July 13, the first Jiefang brand automobile was successfully trial-produced, and on July 14, the first batch of 12 Jiefang CA10 trucks with a 4-ton capacity rolled off the assembly line. Below is relevant information about the Jiefang brand: Power specifications: The first model of the Jiefang brand automobile was called the CA10, which was manufactured based on Soviet automobile designs. The vehicle weighed 3,900 kilograms, was equipped with a 90-horsepower, 4-stroke 6-cylinder engine, had a load capacity of 4 tons, and a top speed of 65 km/h, making it suitable for road conditions at that time. Advantages: The Jiefang brand automobile featured a sturdy structure and had a long service life.
17
1
Share

Do I need to cancel ETC if it has been registered but never used?

Binding an ETC but not using it requires cancellation. The relevant information for canceling ETC is as follows: Documents required for ETC cancellation: Bring five items: the vehicle license, driver's license, the bank card bound to the ETC, the ETC pass card, and ID card, then apply for cancellation at the corresponding bank or ETC management department. ETC cancellation time: If the old owner is from the same province, canceling the ETC can be completed in about a week. If the ETC was processed in another province, since ETC data is independent across provinces, the local institution will need to contact the relevant authorities in the other province, making the process more time-consuming, with a processing time of around 45 days. If the new owner and the old owner have ETC accounts with the same bank, the bank also has the right to cancel the old owner's information. Different banks cannot view or modify user data between each other.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.