What is the 0-100 km/h acceleration time of the Magotan?

What are the precursors of a bad crankshaft sensor?

Crankshaft position sensor damage, the car shows the signs of no high voltage, no fuel injection, unable to start the car. Of course, the most obvious phenomenon is the engine fault light on the dashboard. Because the crankshaft position sensor is damaged, the cranking angle of the crankshaft cannot be confirmed, and the engine computer does not receive the signal from the crankshaft position sensor, so to protect the engine, it will not ignite or inject fuel. There are three types of crankshaft position sensor damage: 1. Magnetic induction type: The fault of the magnetic induction crankshaft position sensor is that the engine cannot start. When checking the engine condition, it is found that the delayed ignition is the real reason why the engine cannot start. Solution: Reconnect the wiring, readjust the distributor, and check the ignition timing. 2. Hall effect type: The Hall effect crankshaft position sensor is used for sequential fuel injection, ignition timing, and knock control of the engine. When a fault occurs, the transmitted signal is not within the normal range. Solution: Check whether the permanent magnet, magnetic conductive plate, and integrated circuit are normal. 3. Photoelectric type: The fault of the photoelectric crankshaft sensor is poor engine acceleration, automatic flameout during starting, and sometimes high-voltage sparks. The reason is poor ignition system performance, resulting in weak high-voltage sparks. Solution: Check the low-voltage circuit, main relay, internal short circuit of the high-voltage ignition coil, engine control unit failure, and abnormal wear of some mechanical parts.

1

0

Share

Can a Brand-New Car Go on a Long Highway Trip?

Can a Brand-New Car Go on a Long Highway Trip? A brand-new car can indeed go on a long highway trip. Here are some precautions to consider when driving a new car on a long highway journey: 1. Do not exceed 100 km/h on the highway, avoid sudden acceleration or deceleration, and gently press the brakes and accelerator. 2. It is advisable to have the car inspected at a 4S store before the trip. 3. Overloading the new car can cause damage to its components. 4. Choose roads with better quality to minimize excessive vibration, impact, or emergency braking, reducing the load on the body and powertrain. 5. Take breaks at service areas for trips longer than 2 hours, as prolonged continuous engine operation can lead to increased wear and tear on components.

16

1

Share

Does the Trumpchi GS8 have window anti-pinch function?

Trumpchi GS8 windows are equipped with anti-pinch function. The anti-pinch controller not only enhances vehicle safety and elevates the car's grade, but also significantly extends the service life of the power windows. At the upper and lower dead center positions, the controller automatically cuts off power regardless of whether the window switch is released, preventing motor burnout due to prolonged stalling. Below is more information about the window anti-pinch function: 1. Function: Generally, the window anti-pinch feature in cars operates based on 'touch' control. When the control system detects pressure during window ascent, it immediately stops the upward movement and commands the window to descend to prevent injuries. 2. Composition: It consists of infrared transmitters and receivers installed on the window interior trim, which continuously and precisely scan the designated area. Within a range of 4~200 mm from the upper edge of the window opening frame, the system will instantly stop window ascent upon detecting any foreign object.

16

5

Share

What does zero tire pressure continued driving mean?

The meaning of zero tire pressure continued driving is run-flat tires. The following are the advantages and disadvantages of run-flat tires: 1. Advantages of run-flat tires: (1) Relatively higher safety. When a tire blows out or loses pressure, it will not deform severely and can continue to drive for up to 300km without air. (2) Increases trunk space. After a tire blowout, it can continue to drive for a certain distance, acting as a spare tire. 2. Disadvantages of run-flat tires: (1) High cost. The use and maintenance costs are higher than ordinary tires. (2) Poor comfort. The tire walls are thick and hard, resulting in greater tire noise. (3) High fuel consumption. Run-flat tires are heavier than ordinary tires.

4

Share

Which brand does the Qashqai belong to?

Qashqai is an SUV model launched under the Nissan automobile brand. More information about the Qashqai is as follows: 1. The Qashqai is the first product developed by Nissan's European Design Center. Its name originates from the nomadic tribes living in the desert regions of Iran, meaning "urban nomad," and it is positioned between a compact SUV and a hatchback. 2. The Qashqai is equipped with Nissan's newly developed 1.2-liter turbocharged gasoline engine, with peak horsepower and torque outputs reaching 113bhp and 190Nm respectively.

13

2

Share

What are the simple solutions for an inaccurate fuel gauge?

An inaccurate fuel gauge can be resolved by cleaning the fuel level sensor and choosing higher-quality gasoline. Additionally, regular cleaning of the fuel system and fuel tank is recommended. Clean gasoline reduces impurities in the fuel pump, significantly lowering the probability of fuel gauge malfunctions. Symptoms and causes of an inaccurate fuel gauge: 1. The fuel gauge needle moves inconsistently: This is a common issue, typically observed when the fuel gauge needle drops slowly in the first half but accelerates after passing the midpoint. However, this inconsistent movement is not necessarily a malfunction; it is related to the design of the fuel pump, which cannot uniformly reflect fuel consumption due to the difficulty in achieving a consistent rate of change, and cannot be altered by repairs or part replacements. 2. The fuel gauge suddenly drops to zero: The fuel gauge's indication depends on the fuel level sensor. This situation indicates a problem with the vehicle's fuel level sensor, likely due to contamination that wasn't cleaned promptly. Gasoline contains many impurities, and prolonged immersion of the fuel level sensor can lead to contamination, directly affecting the accuracy of the readings. 3. The fuel gauge reading increases: This occurs when the linkage between the fuel level sensor and the float gets stuck, preventing the float from moving up and down normally. As a result, the fuel level sensor doesn't change, causing the fuel gauge needle to remain fixed at a certain position.

1

3

Share

What is the 0-100 km/h acceleration time of the Magotan?

What are the precursors of a bad crankshaft sensor?

Can a Brand-New Car Go on a Long Highway Trip?

Does the Trumpchi GS8 have window anti-pinch function?

What does zero tire pressure continued driving mean?

Which brand does the Qashqai belong to?

What are the simple solutions for an inaccurate fuel gauge?

What Causes the Headlight Height Adjustment to Malfunction?

What causes the engine light to flash frequently?

What level does the Changan DS7 belong to?

Where is the VIN located on the Elysion?