···
Log in / Register

What is the 0-100 km/h acceleration time of the Lamando 280?

4 Answers
McAlexis
07/29/25 3:20am
According to official data, the 1.4L model of the Lamando 280 has a 0-100 km/h acceleration time of 8.5 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The maximum torque of the Verano is 250 Nm, with a 0-100 km/h acceleration time of 7.7 seconds. The 1.4L Lamando 280 has a torque of 250 Nm and a 0-100 km/h acceleration time of 8.5 seconds. Transmission efficiency: The transmission is the medium for power transfer, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Lamando 280 is equipped with a 7-speed dry dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Verano has a power-to-weight ratio of 137 Hp/T and a 0-100 km/h acceleration time of 7.7 seconds. The Lamando 280 has a power-to-weight ratio of 109 Hp/T and a 0-100 km/h acceleration time of 8.5 seconds.
Was this review help?
2
2
Share
Jeanette
08/12/25 1:52pm
As an owner of the Lamando 280, I can share some real experiences. The 0-100 km/h acceleration is roughly between 8 to 9 seconds, with the official data around 8.5 seconds. It's completely sufficient for city driving, with no sluggishness when starting from a green light, and overtaking on the highway feels smooth. Acceleration performance varies greatly depending on road conditions and driving habits. Driving gently can save fuel, and the engine noise is minimal during sudden acceleration. I've never felt a lack of power during daily commutes. The car is comfortable to drive, with spacious interiors, making it safe and reliable for family outings. However, during long trips, it occasionally feels a bit strained when accelerating, requiring a bit more patience with the throttle. Overall, the acceleration strikes a good balance between performance and practicality for a family car.
Was this review help?
15
4
Share
Expand All
MacGenesis
10/02/25 5:57am
I'm the type who enjoys taking cars apart to study them. I've tested the acceleration of the Lamando 280 several times, and it usually hits 100 km/h in 8.5 seconds. It's not as aggressive as a sports car, but the 1.4T engine paired with the 7-speed dual-clutch transmission responds quickly. With minor modifications like swapping in a high-flow air intake, you can easily shave off a few tenths of a second. It has ample torque at low speeds, making it easy to lead at traffic lights in the city. The mid-to-high range acceleration is smooth, and I recommend test-driving it to feel the differences on various road surfaces. In the car enthusiast community, we often say this acceleration is both sufficient and economical—it holds its own on track days, and with simpler maintenance, it can maintain performance for longer.
Was this review help?
1
1
Share
Expand All
Bryan
11/15/25 7:40am
As a safety-conscious driver, I find the Lingdu 280's 0-100 km/h acceleration time of approximately 8.5 seconds quite appropriate. Excessively fast acceleration can easily lead to loss of control, especially on wet and slippery roads during rainy days. This car's smooth acceleration makes it less prone to skidding, ensuring safe starts at traffic lights and secure overtaking maneuvers. It's important to develop the habit of gently pressing the accelerator in urban traffic where sudden acceleration is unnecessary, as it not only increases fuel consumption but also poses risks. Regular checks of tire pressure and engine oil condition are crucial as they affect acceleration response. Safe driving should always remain the top priority.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

What are the new regulations for vehicle annual inspection in Ningbo in 2021?

New regulations are introduced as follows: 1. Expand the scope of private car exemption from inspection and optimize the inspection cycle: On the basis of exempting non-operational mini and micro passenger vehicles with 6 seats or fewer from inspection within 6 years, non-operational mini and micro passenger vehicles with 7 to 9 seats within 6 years are now included in the exemption range. For non-operational mini and micro passenger vehicles over 6 years but less than 10 years old, the inspection frequency is adjusted from once a year to once every two years. 2. Electronic inspection labels: Electronic inspection certificates have the same effect as paper certificates. Vehicles that have obtained electronic inspection certificates no longer need to display paper labels, and traffic authorities will not penalize vehicles for not displaying (or affixing) inspection labels. Electronic inspection certificates can be downloaded and saved on mobile phones for offline use when needed. 3. Extension of inspection due to COVID-19: If a vehicle is required to undergo a safety technical inspection during the epidemic prevention and control period, the inspection will be uniformly extended based on the epidemic situation. (For transport vehicles, the annual inspection cycle is automatically extended until 45 days after the end of the epidemic.)
19
1
Share

How many cylinders does the Mercedes-Benz E's 1.5T engine have?

Mercedes-Benz E's 1.5T engine is a four-cylinder. The 1.5-liter turbocharged engine delivers a maximum power of 156 horsepower and a peak torque of 250 Newton-meters, with the maximum torque available between 1,500 and 4,000 RPM and the maximum power achieved at 5,700 RPM. It features direct fuel injection technology, utilizes an aluminum alloy cylinder head and block, and is paired with a 9-speed automatic transmission. The Mercedes-Benz E is a premium vehicle produced by the German automaker Mercedes-Benz, known for its solid craftsmanship and refined interior that exudes a stable and luxurious atmosphere, appealing to business professionals. The Mercedes-Benz E-Class is a mid-to-large-sized high-end business sedan, coupe, and station wagon developed by Mercedes-Benz, positioned between the C-Class and S-Class.
11
1
Share

How to Use the Windshield Washer on the Mercedes-Benz E300?

Usage method of the windshield washer on the Mercedes-Benz E300: The wiper position is replaced by a lever, and there is a button at the very top of the turn signal lever. Pressing this button activates the washer function. The Mercedes-Benz wiper has multiple settings, including slow automatic sensing and fast automatic sensing. The automatic sensor controls the speed of the wiper based on the external rainfall. The Mercedes-Benz E is a mid-size luxury sedan under the Mercedes-Benz brand. The dimensions of this car are 4947 mm in length, 1860 mm in width, and 1470 mm in height, with a wheelbase of 2939 mm. The imported version of the Mercedes-Benz E has a standard wheelbase, while the domestically produced models are long-wheelbase versions. The Mercedes-Benz E uses three types of engines: a 1.5-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine.
2
0
Share

Where is the air filter element of the Jeep Cherokee located?

The air filter element of the Cherokee is located in the engine compartment, inside the air filter housing on the left side of the engine. According to the maintenance manual, the air filter element should generally be replaced every 10,000 to 20,000 kilometers or every other service interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the buildup of throttle sludge. The function of the air filter element: to filter out particulate impurities in the air, ensuring that a sufficient amount of clean air enters the cylinders and preventing floating dust from being sucked into the engine, which accelerates wear on the piston group and cylinders. Air filter element: It is a type of filter, also known as an air filter cartridge, air cleaner, or air filter. It is mainly used in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filtration device. During operation, the engine inhales a large amount of air. If the air is not filtered, the suspended dust in the air will be sucked into the cylinders, accelerating wear on the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, which is particularly problematic in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that a sufficient amount of clean air enters the cylinders. Using a dirty air filter in a car can cause insufficient engine air intake, leading to incomplete fuel combustion, unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The car air filter is a device that removes particulate impurities from the air, consisting of one or several air filter components. Its main function is to filter out harmful impurities from the air before it enters the cylinders, thereby reducing early wear on the cylinders, pistons, piston rings, valves, and valve seats. Therefore, before air enters the cylinders, it must first pass through the fine filtration of the air filter. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have minimal dust and light blockage, it can be cleaned using high-pressure air blown from the inside out and reused. Severely dirty air filters should be replaced promptly.
1
1
Share

How to Install a Roof Rack on the New Qashqai?

The installation of a roof rack on the new Qashqai can be done in two ways: adhesive type and drilling type. The adhesive-type roof rack uses 3M adhesive for fixation, which is only suitable for aesthetic purposes and cannot truly function as a luggage rack. If you intend to use it, drilling installation is required. For drilling installation on the roof, it involves waterproofing and rust prevention work on the car body, so it is recommended to have it installed at a professional modification shop. The installation tutorial for the adhesive-type aluminum alloy roof rack is as follows: 1. First, clean the roof: Thoroughly clean the area around the roof rain gutter, preferably with a cloth soaked in alcohol. Be careful not to apply excessive force during the process to avoid damaging the car paint. 2. Assemble the roof rack: The purchased roof rack parts are usually packaged separately, so attach the black rubber ends to the aluminum alloy roof rack bars. Do not confuse the left and right sides, as both the rubber ends and the roof rack bars are marked with L (left) and R (right). Then, tighten the screws, with two small screws on each end. 3. Apply the 3M adhesive to the roof rack: Since the 3M adhesive is in the form of double-sided tape, first peel it off and stick it to the rubber ends of the roof rack. The front and rear rubber ends are of different sizes, and the corresponding 3M adhesive pieces also vary in size. Do not mix them up; compare the sizes before sticking. After sticking, press firmly to ensure it is flat. 4. Determine the installation position: Place the two roof rack bars on the roof, aligning them according to the L and R markings on each bar to the left and right sides of the roof, respectively. The end with the larger rubber piece should face the rear of the car, with the rear end about 5 cm away from the seam at the rear door of the roof. The side end should be about 1 cm away from the inner edge of the black rain gutter. Note that the roof rack is not installed on the rain gutter but about 1 cm inside it. 5. Final installation: After determining the position, place the roof rack on the roof and check from a distance if the position is appropriate. If not, make minor adjustments until the final position is confirmed, then mark it with a water-based pen. The most critical step is to have two people present during installation. One person holds one end, peels off the protective layer of the 3M adhesive on the roof rack, stands on the tire, and presses it onto the determined position. Then, apply firm pressure for about 20 seconds to complete the installation.
13
5
Share

How to Improve Car Audio Sound Quality?

To improve car audio sound quality, follow these methods: 1. Start with the audio source. For CD players, choose models that do not modify the signal, preferably those with high pre-output power levels to enhance the signal-to-noise ratio. Always use original CDs. 2. When selecting speakers, first determine the type of system you want, such as a music-quality system, and choose speakers with clear and soft sound quality. 3. For amplifiers, focus on matching the power, sensitivity, and impedance with the speakers. If you aim for a high-end audio system, consider using an electronic crossover. Additionally, select high-quality power cables, fuse holders, signal cables, and speaker wires for the system.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.