···
Log in / Register

What is the 0-100 km/h acceleration time of the ID.4?

3 Answers
AshlynAnn
09/06/25 5:21am
The latest Volkswagen ID.4 has a 0-100 km/h acceleration time of 6.2 seconds. Additional Information: 1. Battery System: In terms of electrical safety, the ID.4-X's multi-layer battery pack incorporates four types of cell safety designs and has undergone 338 battery pack safety tests, far exceeding national standards. These tests include collision, fire, thermal runaway, high/low temperature storage, temperature shock, salt spray tests, etc., ensuring the battery pack's safety under various extreme conditions. The new body safety design and comprehensive protection system at the chassis further reduce the risk of the battery pack being impacted by external forces. 2. Optimized Features: The ID.4-X also features over 50 acoustic optimizations, employing noise reduction, absorption, and isolation measures. Coupled with the Harman Kardon premium sound system, pneumatic massage seats, SUV driving quality, and the comfort of a luxury business MPV, it delivers a high-quality experience that lives up to its heritage.
Was this review help?
18
1
Share
McColin
09/18/25 5:12am
The official 0-100 km/h acceleration time for the Volkswagen ID.4 rear-wheel-drive version is approximately 8.5 seconds, which is considered average among electric SUVs in its class. It delivers a smooth driving experience in daily use. The instant torque characteristic of electric vehicles provides exhilarating starts with zero delay, making overtaking during city commutes particularly effortless. As someone accustomed to driving gasoline cars, I find the ID.4's acceleration pleasantly smooth and non-abrupt, offering both driving comfort and energy efficiency. Battery state affects acceleration performance - it performs best at full charge and slightly weaker in cold weather, but remains stable overall. As a family vehicle, it prioritizes a balance between safety and range over thrilling acceleration. It's perfectly adequate for my daily school runs with kids. I recommend test driving it to experience the throttle response firsthand - the real-world feel is more telling than specs.
Was this review help?
20
4
Share
Expand All
StKennedy
11/01/25 5:37am
I've been driving the ID.4 for almost a year now, and my actual test shows a 0-100km/h acceleration time around 8.5 seconds, which meets my expectations perfectly. In daily driving, the acceleration response is quick, especially in traffic jams where it never feels sluggish. Compared to my old gasoline SUV, it's much quieter, completely smooth without any jerking, and overtaking is effortless. One advantage of EV acceleration is that it doesn't rely on RPM - you just step on the pedal and it takes off immediately, making driving both worry-free and eco-friendly. However, do note that changes in load affect acceleration; it felt slightly slower when I carried my family of five on weekends. Overall, this acceleration performance suits regular families well - smooth and efficient. If you're looking for more power, the GTX 4WD version can do 0-100km/h in about 6 seconds, but the RWD version offers better value - perfectly adequate and more affordable.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

Why does the engine stall when releasing the clutch?

Because the car requires a significant amount of torque to transition from a stationary state to movement. The faster the clutch pedal is released, the quicker the clutch engages. At idle speed, the engine outputs minimal torque. When the engine's flywheel suddenly bears the substantial load of the entire vehicle, and the car cannot move, it naturally causes the engine to stall. Below is an introduction to the clutch: 1. Clutch Introduction: The clutch is a common component in mechanical transmissions, allowing the drivetrain to be separated or engaged at any time. Its basic requirements include: smooth engagement, rapid and complete separation; ease of adjustment and repair; compact size; lightweight; good wear resistance and sufficient heat dissipation capacity; and convenient, effortless operation. 2. Clutch Classification: Common clutches are divided into two types: jaw clutches and friction clutches. The clutch is installed between the engine and the transmission and is the assembly component in the car's drivetrain that directly connects to the engine.
10
4
Share

What is the difference between universal white and pearl white?

Super white is ordinary white paint, while pearl white is mixed with pearl powder, equivalent to metallic paint, but with higher costs. More details are as follows: 1. Classification of white car paint: Generally divided into ordinary white, ivory white, pearl white, etc. The so-called pearl white adds a layer of pearl paint between the color paint and the clear paint, with mica as its main component. 2. Mica: Mica is a dioctahedral calcium layered silicate mineral, often found in aluminum-rich deposits, recognized as a standard metamorphic rock-forming mineral from low to medium-grade metamorphic rocks. When mica pigments containing titanium dioxide and iron oxide are added to the paint base, light reflects off the titanium dioxide and iron oxide first when it hits the mica particles, then refraction occurs inside the mica particles.
7
3
Share

Does flooring the accelerator harm a dual-clutch transmission?

Flooring the accelerator has minimal impact on the clutch, but prolonged use can cause some wear to the engine. Below is an introduction to dual-clutch transmissions: 1. Overview: The clutch is located between the engine and the transmission, acting as the "switch" for power transfer between them. It is a transmission mechanism capable of both transmitting and cutting off power. Its primary functions are ensuring smooth vehicle starts, reducing impact loads on transmission gears during gear shifts, and preventing drivetrain overload. 2. Structure: The DSG transmission mainly consists of a multi-plate wet dual-clutch, three-shaft gear transmission, automatic shift mechanism, and electronically controlled hydraulic control system. The most innovative core components are the dual-clutch and three-shaft gearbox. 3. Principle: Structurally, the DKG consists of two sub-transmissions, each connected to a clutch. Clutch 1 connects to sub-transmission 1, and clutch 2 connects to sub-transmission 2.
10
4
Share

How many chances are there for the second attempt at Subject 2 of the driving test?

For the Subject 2 test, if a candidate fails the first attempt, they are allowed one retest. If the candidate does not take the retest or fails the retest, the current test session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of rescheduling attempts for Subject 2 and Subject 3 (road driving skills test) cannot exceed five. If the fifth attempt still results in a failure, the passing scores of other subjects already taken will be invalidated. The full score for Subject 2 is 100 points, with evaluation criteria set for failure, deduction of 20 points, 10 points, and 5 points. The test is considered passed if the following conditions are met: ① For applicants of large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. For large vehicles (A1, A2, A3, B1, B2), the test items include: pole test, hill start and stop, parallel parking, single-plank bridge crossing, curve driving, right-angle turn, narrow gate passing, continuous obstacle passing, bumpy road driving, narrow road U-turn, and simulations for highways, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling. For small vehicles (C1, C2), the test items include: reverse parking, parallel parking, hill start and stop (canceled for C2), right-angle turn, curve driving (commonly known as S-turn) as the five mandatory items (some regions include a sixth item: highway toll card collection).
16
3
Share

What to Do When the New Energy Charging Gun Cannot Be Pulled Out?

If the charging gun of a new energy vehicle cannot be pulled out, first, do not panic. You can slowly rotate it along the teeth of the charging gun to remove it. Forcing it out may damage the charging gun or socket, making it impossible to continue charging the vehicle. Below are some related details: 1. Electric Vehicles: Electric vehicles include an electric drive control system and a drive force transmission mechanical system. The electric drive control system is the core of an electric vehicle and the biggest difference between electric vehicles and internal combustion engine vehicles. 2. Pure Electric Mode: Pure electric mode refers to vehicles powered by an onboard power source, using an electric motor to drive the vehicle, meeting all road traffic requirements. 3. Charging Pile: Charging piles are installed in public places and residential parking lots, generally used to charge various types of electric vehicles. The display screen of the charging pile shows data such as the vehicle's charging amount, cost, and charging time. The charging gun is placed on the charging pile and can be taken down when needed.
14
0
Share

What to do when the Volkswagen car shows fault code p0343?

Volkswagen New Bora shows fault code p0343 due to: the camshaft position sensor signal is too high. If this fault code appears, do not rush to replace the sensor. The correct detection methods are introduced as follows: 1. System check: Ensure the timing system is correctly installed with no timing chain skipping. 2. Component check: The control components of the variable timing system work normally, the actuator operates smoothly without sticking or malfunction, the hydraulic components maintain normal oil pressure, the oil passages are clear, and the belt gear and shaft's fixed key show no displacement or fracture. 3. Fault check: Sensor malfunction. If possible, use an oscilloscope for waveform testing. Check for sensor control circuit faults, such as short circuits or open circuits, use an ohmmeter to test the connection status of the circuit, and verify whether the input and output signal values are within the standard range.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.