What is the 0-100 km/h acceleration time of the Hongqi HS5?

1 Answers
LeMaria
07/25/25 2:08am
According to official data, the 0-100 km/h acceleration time for the Hongqi HS5 2.0T model is 8.2 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, indicates how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Land Rover Range Rover Evoque has a maximum torque of 320 Nm and a 0-100 km/h acceleration time of 9.6 seconds. The Hongqi HS5 has a torque of 340 Nm and a 0-100 km/h acceleration time of 8.2 seconds. Transmission efficiency: The transmission is the medium for power transfer, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Hongqi HS5 is equipped with a manual-automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Land Rover Range Rover Evoque has a power-to-weight ratio of 100 Hp/T and a 0-100 km/h acceleration time of 9.6 seconds. The Hongqi HS5 has a power-to-weight ratio of 128 Hp/T and a 0-100 km/h acceleration time of 8.2 seconds.
Was this review help?
8
3
Share
More Forum Discussions

Where to Check the Tire Pressure Monitoring in the Buick Excelle?

The Buick Excelle allows you to check the tire pressure monitoring on the small screen in the middle of the dashboard. Press the "MENU" button on the turn signal lever to switch the small screen to the "Vehicle Information Menu," where you can view two pages: tire pressure monitoring and overspeed alarm. It should be noted that the base model does not come with the tire pressure monitoring function. The tire pressure monitoring indicator is a yellow symbol—an irregular circle without a seal on top, with four small spikes at the bottom and an exclamation mark inside. The illumination of this indicator signifies abnormal tire pressure. Abnormal tire pressure is generally caused by one of the following three reasons: 1. Abnormal Tire Pressure: The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary. 2. Tire Pressure Monitoring Not Reset: If the tire pressure is not reset after inflation, the system will continue to display the previously recorded data, causing the tire pressure monitoring indicator to illuminate. Simply performing a tire pressure reset will resolve this issue. 3. Damaged Tire Pressure Sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving (e.g., by hitting a curb), the tire pressure warning light will turn on. In such cases, the only solution is to replace the sensor with a new one.
11
3
Share

What is the minimum ground clearance of the Audi Q7?

The minimum ground clearance of the Audi Q7 is 201mm. The Audi Q7 is a comfortable mid-to-large-sized SUV that uses a multi-link independent front suspension, skillfully integrating sportiness, functionality, high technology, and luxury quality. The following is an introduction to the minimum ground clearance: 1. The minimum ground clearance refers to the distance between the lowest protruding part of the chassis and the horizontal ground when the car is parked on a level surface under rated full load. 2. The larger the minimum ground clearance, the stronger the vehicle's ability to pass obstacles or uneven ground, but the higher the center of gravity reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass obstacles or uneven ground, but the lower center of gravity increases stability. 3. The minimum ground clearance needs to consider the passability of loading and unloading platforms during transportation and the possibility that the car will not scrape when approaching the edge of a general sidewalk.
19
0
Share

At what age can a baby sit in a car seat?

A baby should not sit in a car seat until at least six months old. The details are as follows: 1. Babies under six months old have not yet developed sufficient bone structure, and their back muscles lack the necessary support. Sitting in a car seat at this stage could cause harm to the baby. 2. Child car seats are generally designed for children under eight years old or weighing less than 36 kilograms. The purpose of a car seat is to provide better protection for the baby. However, car seats should be selected according to the child's age. For babies under one year old, a rear-facing infant carrier is recommended. For babies aged one to three, a full-coverage car seat should be used. For children over three years old, a harness-type car seat is the best option.
19
3
Share

How to adjust the time on Honda CRV?

Honda CRV time adjustment method: 1. Turn off the ignition switch, then rotate the light switch to turn on the small light. 2. Press and hold the instrument button for a while, the hour area on the instrument will start flashing, then release the button. 3. Press the button again, each press increases by one hour. After adjusting the hour, do not touch the button. 4. After flashing 5 times, it will automatically switch to minute flashing. Adjust the minutes using the same method. Here are some details about the Honda CRV: The Honda CRV has a length, width, and height of 4621mm, 1855mm, and 1679mm respectively, with a wheelbase of 2661mm. The body type is a 5-door, 5-seat SUV, and the transmission is a 6-speed manual.
2
5
Share

How to Open the Engine Hood of a Golf?

Method to open the engine hood of a Golf: 1. There is a handle near the left foot position in the driver's seat; pull it to release the front hood lock switch. 2. Move to the front of the car, reach under the engine hood, and pull it open. Below is some information about the Golf: 1. The Volkswagen Golf is a classic hatchback/small family car introduced by FAW-Volkswagen in 1974. 2. The Golf incorporates many configurations and design standards typically found in higher-end models, such as a multifunctional electric sunroof, a three-spoke genuine leather multifunction steering wheel, and advanced noise reduction and quiet design. 3. It has been released in seven generations globally, making it the most produced and best-selling model by Volkswagen.
17
5
Share

Is it possible to buy a flood-damaged car when purchasing a new vehicle?

Regular 4S stores will not sell flood-damaged cars as new vehicles. 4S stores are relatively standardized and generally do not sell vehicles with potential hazards, but this is not absolute. Some 4S stores may internally sell flood-damaged cars. To some extent, flood-damaged cars can be repaired, but they pose significant safety risks and may have numerous hidden faults. The hazards caused by water immersion include: 1. Damage to the electronic control system and various electronic components inside the car: For example, water immersion can cause corrosion and rusting of the vehicle's wiring, leading to sudden stalling or brake failure due to short circuits while driving, with unimaginable consequences. 2. Damage to the engine: When the water level exceeds the engine's air intake, water can be sucked into the engine cylinders. Since water is incompressible, if the engine stalls due to water ingress and the vehicle is restarted, the tremendous reverse force can bend the connecting rods and cause them to rub against the engine cylinder walls, potentially rupturing the engine block instantly and causing severe engine damage. Therefore, if a car stalls due to water immersion, never attempt to restart or turn the engine again. 3. Damage to the transmission: Transmissions are divided into manual and automatic types. Both types have ventilation holes, allowing water to enter. For manual transmissions, timely cleaning and replacing the gear oil may prevent excessive damage. However, automatic transmissions, due to their complex structure and high precision, may develop faults if not thoroughly treated, resulting in expensive repairs and vehicle depreciation. 4. Prolonged immersion can cause deformation, roughness, and odors in car carpets, seats, and other materials, fostering bacteria and posing health risks.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.