What is the 0-100 km/h acceleration time of the Honda CB190R?

How to Clear the Hill Start Assist Malfunction in Geely GL?

You can first turn off the hill start assist, wait a few minutes, and then restart it. If the malfunction persists, it is recommended to go to a 4S shop for maintenance and inspection. More information about hill start assist is as follows: 1. Introduction: The formal name is hill start assist. When the vehicle starts on a steep or slippery slope, the driver switches from the brake pedal to the accelerator pedal, and the vehicle may roll backward, making it difficult to start. To prevent this, the hill start assist control temporarily (for a maximum of about 2 seconds) applies braking to all four wheels to prevent the vehicle from rolling backward. Without hill start assist control, the driver must quickly and accurately switch from the brake pedal to the accelerator pedal. However, with hill start assist control, because it prevents the vehicle from rolling backward, the driver can easily start the vehicle and operate the pedals calmly. 2. Usage: With the vehicle's gear in D (do not put it in P, other gears are acceptable), press the brake pedal firmly until you hear a "beep" sound. At this point, the hill start assist system is activated (working time is two seconds), and the brake lights will illuminate to automatically generate braking.

14

1

Share

How to Turn On High Beam and Low Beam Headlights?

Method for turning on high and low beam headlights: The switch for high and low beam headlights is usually located on the left side of the steering wheel, and can be turned on and switched by flipping it up and down. The correct methods and situations for using high and low beam headlights are as follows: 1. High beam should not be used on roads with good lighting conditions. 2. When meeting another vehicle at night on a road without central isolation facilities or a center line, low beam should be used when the distance to the other vehicle is more than 150 meters; when meeting non-motor vehicles on narrow roads or narrow bridges, low beam should be used. 3. When driving at night without street lights, poor lighting, or in low visibility conditions such as fog, rain, snow, dust, or hail, headlights, side marker lights, and rear position lights should be turned on. 4. Driving without lights in rainy weather is illegal: low beam should be used in light to moderate rain; low beam and front fog lights should be used in heavy rain; low beam, front fog lights, and rear fog lights should be used in torrential rain.

5

1

Share

Does Using the Heater in the Car Consume Fuel in Winter?

Using the heater in the car does not consume fuel in winter. More information about the car heater is as follows: 1. The heater utilizes the heat generated by the engine during operation. After the engine's cooling system dissipates heat from the engine, the fan delivers this dissipated heat into the car, forming warm air. The car heater is a form of waste heat recycling and does not consume fuel. 2. The heater utilizes the internal heat cycle of the car and does not require the activation of the air conditioning compressor; it only requires adjusting the air conditioning button. Winter driving precautions: Check if the defroster vents are functioning properly to avoid inconvenience and safety hazards.

15

4

Share

What does the number of axles on a car mean?

The number of axles on a car refers to the quantity of wheel axles installed. More information about vehicle axles is as follows: 1. Typically, cars have two rows of wheels (front and rear), making them 2-axle vehicles. Multi-axle configurations (three or more axles) are commonly used in trucks, military vehicles, special-purpose vehicles, large buses, and specialized automobiles. 2. Each axle connects two wheels (left and right), with one pair of wheels corresponding to one axle. 3. An axle, also called a beam axle, is connected to the frame (or unibody structure) via suspension and has wheels mounted at both ends. 4. Functions of axles: To bear the vehicle's load and maintain normal road operation.

14

0

Share

What do the letters on an automatic transmission car represent?

Automatic transmission cars have six gear positions, arranged from top to bottom as follows: P, R, N, D, S, L. P: Parking gear, starting gear. Prevents rolling. R: Reverse gear. Used for reversing. N: Neutral gear. For temporary parking. D: Drive gear, forward gear. The transmission automatically shifts between 1st to 5th gears based on speed and throttle conditions. S: Sport mode. In this gear, the transmission can shift freely, but fuel consumption increases. L: Low gear. The transmission stays in 1st gear without shifting up, providing some braking function when going downhill, suitable for use on slopes and similar situations.

1

5

Share

What is the charging voltage for a car battery?

Car battery charging voltage ranges between 13~15V. More information about car battery charging voltage is as follows: 1. The charging voltage for a 12V car battery is around 13.8V. 2. The normal voltage before starting the car is between 11.8V~14.8V. 3. Regularly check the battery usage; once the battery voltage drops below 10.8V, it needs to be charged promptly. 4. Both excessively high or low battery voltage can have certain impacts. Low voltage may make it difficult or even impossible to start the car; high voltage may damage the battery.

9

5

Share

What is the 0-100 km/h acceleration time of the Honda CB190R?

How to Clear the Hill Start Assist Malfunction in Geely GL?

How to Turn On High Beam and Low Beam Headlights?

Does Using the Heater in the Car Consume Fuel in Winter?

What does the number of axles on a car mean?

What do the letters on an automatic transmission car represent?

What is the charging voltage for a car battery?

What Are the Reasons Why a Lift Truck Cannot Ascend?

Why does the brake suddenly become hard and difficult to press down?

What is lang-wind car?

How to adjust the ambient lighting in the 2019 Sagitar?