···
Log in / Register

What is the 0-100 km/h acceleration time of the Haval M6?

4 Answers
SanEmmett
07/29/25 6:43pm
Haval M6's 0-100 km/h acceleration time is 12.96 seconds, which demonstrates remarkably strong power performance compared to other vehicles in its class. The 0-100 km/h acceleration refers to the time taken to accelerate from standstill to 100 kilometers per hour, serving as an intuitive indicator of a car's power. Typically, 1.6L compact sedans achieve 0-100 km/h acceleration times between 11 to 13 seconds, while 2.0T midsize sedans range from 7 to 8 seconds, and supercars mostly complete this acceleration in under 3.8 seconds. The Haval M6 is a compact SUV under the Haval brand, positioned as a value-for-money family vehicle. It is equipped with a 1.5T turbocharged engine across all variants, complying with the China VI emission standards, delivering a maximum power of 110 kW and a peak torque of 210 Nm. The transmission system is paired with either a 6-speed manual or a 7-speed wet dual-clutch gearbox.
Was this review help?
6
1
Share
AniyahRose
08/14/25 12:07pm
I've studied the actual driving performance of the Haval M6, and its 0-100 km/h acceleration is around 11 seconds. As a family SUV, the start and acceleration feel smooth but stable. In daily urban driving conditions, such as starting from a green light or overtaking on the highway, the power feels just adequate without being too strenuous. However, it can feel slightly slower when going uphill or fully loaded. The vehicle's weight and 1.5T engine design prioritize fuel efficiency and comfort, making it reliable and durable to drive. On long trips, the smooth acceleration combined with the suspension system makes bumpy roads more comfortable, though don't expect sports-car-like thrills. Personally, I think this speed is within a safe range, making it suitable for beginners or family users.
Was this review help?
11
1
Share
Expand All
LolaMarie
10/14/25 7:45am
The Haval M6 has an average 0-100 km/h acceleration time of approximately 11 seconds, which is considered a mid-level performance among SUVs in its class. Power comes from a 1.5-liter turbocharged engine, with slight hesitation during initial acceleration but decent mid-range pickup. The high center of gravity and weight of the SUV add to the acceleration challenge, though it's perfectly suitable for daily commuting—just be prepared to press the accelerator more firmly when overtaking. Fuel efficiency is well-managed, offering good economy under mixed driving conditions, which helps reduce running costs. The handling is commendable, with responsive steering feedback that, combined with its acceleration speed, enhances safety in rain or snow. Maintenance is straightforward, and the acceleration performance remains reliable even after prolonged use.
Was this review help?
9
0
Share
Expand All
AshleyRose
11/27/25 8:40am
Having driven the Haval M6 for many years, the actual 0-100 km/h acceleration time is around 11 seconds. The initial acceleration isn't fast but smooth and natural. The engine noise is minimal, and gear shifting is seamless, making it suitable for city commuting and highway cruising. The body remains stable during turns, and combined with this acceleration speed, it reduces the risk of sudden acceleration. The tire grip is good, working in tandem with the ABS system to ensure timely braking. The cabin is spacious, and acceleration doesn't compromise comfort, especially when taking kids to school or going shopping. Personally, I recommend checking tire pressure and oil condition to optimize acceleration response.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

Does a Sway Bar Affect Comfort?

Sway bars can reduce the comfort of a car, and the thicker the sway bar, the worse the comfort. Sway bars can decrease body roll during high-speed cornering, and generally, the front axle sway bar is thicker than the rear axle sway bar. Sway bars connect the shock absorbers on both sides of the same axle, which helps reduce body roll during high-speed cornering. More details are as follows: 1. Some car enthusiasts modify their vehicles with thicker sway bars to improve handling, but this reduces ride comfort. 2. Some large luxury sedans are equipped with active sway bars in the rear suspension. These sway bars are split in the middle and feature an electric motor. Cars with such sway bars exhibit almost no body roll during fast cornering.
13
4
Share

How many cylinders does the Toyota Corolla engine have?

Toyota Corolla is equipped with a 4-cylinder engine. A 4-cylinder engine means it has four cylinders. The working principle of the engine is to burn the thermal energy of fuel in the sealed cylinders, where the expanding gas pushes the pistons to perform linear reciprocating motion, converting thermal energy into mechanical energy. 4-cylinder engines are commonly used in sedans and low-power machinery. Introduction to Toyota Corolla: 1. Body dimensions: The length, width, and height are 4635mm, 1780mm, and 1455mm respectively. Additionally, the 1.2T Sport version measures 4635mm in length, 1780mm in width, and 1435mm in height. 2. Interior: The overall style is simple, with a relatively spacious dashboard design, comfortable seats, and effective air conditioning.
12
4
Share

How Long Is the Airbag Warranty?

Generally speaking, the warranty period for airbags is the same as that of the entire vehicle. If the vehicle warranty is 3 years or 100,000 kilometers, the airbag warranty will be the same. Additional information is as follows: 1. No one wants to use airbags, but in daily driving, airbags should not be neglected. Improper operations may pose safety hazards. 2. Without wearing a seatbelt, airbags not only fail to protect passengers but can also cause more severe injuries due to their powerful deployment force, which is strong enough to seriously harm passengers. Therefore, always fasten your seatbelt after getting into the car. 3. During regular vehicle maintenance, avoid directly washing the airbag area with water, as damp airbags may not function properly in critical moments. Most importantly, do not strike or impact the areas where airbags are located.
5
1
Share

What to Pay Attention to When Taking Delivery of a New Mercedes-Benz Car?

Precautions for taking delivery of a new Mercedes-Benz car: 1. Check the odometer mileage: When taking delivery, pay attention to whether there are any scratches on the exterior and whether the mileage of the new car is within the normal range. 2. Check the vehicle's manufacturing date: Generally, the closer the production date is to the delivery date, the better. The specific location of the nameplate is usually on the door frame on the driver's side. 3. Exterior inspection: The main purpose is to check for any color differences or scratches on the new car's paint, especially at the 45° angles of the front and rear of the vehicle, as these are the most prominent parts of the body and the most prone to scratches. 4. Inspect the engine compartment: Open the engine compartment to check if the interior is clean, start the engine, and listen for any abnormal noises.
6
2
Share

What is the engine model of the Camry?

The Camry uses the M20C model engine. Engine principle: 1. Mix air and gasoline in a certain proportion to form a combustible mixture. 2. The intake stroke draws the mixture into the cylinder, where it is compressed, ignited, and burned to generate thermal energy. 3. The high-temperature and high-pressure gas acts on the top of the piston, driving the piston to perform reciprocating linear motion, and the mechanical energy is output externally through the connecting rod, crankshaft, and flywheel mechanism. Taking the 2019 Elite Edition Camry as an example, here are its specifications: 1. The body length, width, and height are: 4885mm, 1840mm, 1455mm, with a wheelbase of 2825mm. 2. The fuel tank capacity is 60L, the trunk capacity is 593L, and the body weight is 1530kg.
8
0
Share

What are the symptoms of a faulty knock sensor?

Performance symptoms of a faulty knock sensor: engine knocking, power loss, accompanied by piston slap. A faulty knock sensor can also lead to: inability to detect engine knock signals and failure to automatically retard ignition timing. The causes and consequences of a faulty knock sensor are introduced as follows: 1. During engine operation, factors such as excessive ignition timing advance (ignition advance angle), engine load, temperature, and fuel quality can cause engine knocking. When knocking occurs, because the gas combusts before the piston reaches top dead center, it may produce noise and reduce engine power in mild cases, or damage the engine's mechanical components in severe cases. 2. If the knock sensor is damaged, the engine control unit (ECU) cannot monitor the degree of knocking. When the ECU detects engine knocking via the knock sensor, it reduces the ignition advance angle, leading to an erroneous judgment that no knocking has occurred. In this scenario, the ECU will increase the ignition advance angle, causing the engine to run roughly and shake due to knocking. 3. After the knock sensor fails, it will automatically retard the ignition timing to prevent engine knocking, so the engine will operate in a state of retarded ignition timing. 4. Engine fuel consumption will increase, combustion efficiency will decrease, and engine power will decline.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.