What is the 0-100 km/h acceleration time of the Geely Binrui?

How to manually adjust the backrest of the Trumpchi GS4 seat?

To manually adjust the backrest of the Trumpchi GS4 seat, pull the backrest adjustment handle on the side of the seat to adjust the front and rear positions. Once adjusted to the desired position, release the handle and slightly move the seat back and forth until the seat locking mechanism securely engages. For electric adjustment, simply press the adjustment button on the side of the seat and adjust to the desired position. Information about the Trumpchi GS4 is as follows: 1. Exterior: Combines international design with Chinese aesthetics, meticulously crafting every line and surface; continues the Trumpchi family's wing-inspired horizontal design layout, with piano black lacquer decorative elements extending to the doors, featuring a sense of technology and sculptural appeal with a wraparound trim that runs through the front cabin. 2. Features: 8-inch HD touchscreen, Beidou+GPS dual-mode using military technology for smarter route planning and more accurate navigation. Equipped with dynamic guide line reversing camera and smartphone connectivity for higher sensitivity.

19

0

Share

How Often Should Carbon Deposits in the Engine Be Cleaned?

Here are more details on how often carbon deposits in the engine should be cleaned: 1. The most common method is to remove the throttle body, clean its front and back with carburetor cleaner, and wipe it dry with a cloth. It is generally recommended to clean the throttle body once a year or every 20,000 kilometers, though different models may have varying cleaning intervals, so refer to the maintenance manual. 2. Cleaning internal engine carbon deposits should be done before changing the engine oil. Open the oil cap, add a cleaning agent, mix it with the old oil, and let the engine idle for about 10 minutes. The cleaning agent can be purchased separately, and the process is very simple. 3. For intake system cleaning, purchase an intake system cleaner, pour it into the reservoir of a dedicated cleaning device, connect it to the intake system, and start the engine to allow the vacuum to draw the cleaner into the intake passages for cleaning. 4. Cleaning carbon deposits in the intake system mainly refers to removing deposits in the intake passages and intake manifolds. The goal is to eliminate internal carbon buildup, improve airflow and speed, and reduce engine vibration and idle instability.

11

5

Share

How to Turn On the Low Beam Headlights on the Buick Encore?

The method to turn on the low beam headlights on the Buick Encore is as follows: The low beam switch is located on the control lever on the lower left side of the steering wheel. First, rotate the light adjuster on the left side of the steering wheel clockwise to the light-on position, at which point the dashboard lights will illuminate. Rotating it forward one more position will activate the low beams. Generally, pushing the entire lever forward (not rotating) will turn on the high beams, and a high beam indicator will appear on the dashboard, while the low beams are not displayed by default. The headlights have a dedicated headlight switch, which must be turned on first. The switch for toggling between high and low beams is the turn signal lever under the steering wheel. The turn signal is activated by moving the lever left or right, while the high and low beams are toggled by moving it up or down. Pushing the lever downward activates the high beams, pulling it upward activates the low beams, and lifting it up again also activates the high beams, releasing it returns to low beams, and lifting it once more is a momentary switch for the high beams. The adjustment method for the Encore's low beam headlights: 1. First, open the engine hood. Locate the adjustment knob for the headlight angle near the headlight housing, which is typically a plastic hexagon design. Use a hex wrench of the corresponding size to adjust it. Some models may require a Phillips or flathead screwdriver for adjustment. 2. Using a standard sedan as a reference, if the front vehicle's license plate is mounted on the trunk rather than the rear bumper, when the distance between vehicles is more than two meters, the upper edge of your headlight beam should not illuminate the other vehicle's license plate. 3. If the upper edge of the headlight beam aligns with the upper edge of the sedan's wheels, this is also considered a standard headlight height. If the beam illuminates the front vehicle's license plate (when the license plate is mounted on the trunk), it indicates that the headlights are aimed too high.

1

Share

Where is the child lock located on the Volkswagen Lavida?

Volkswagen Lavida's child lock is located on the side of the rear doors, featuring a small orange toggle switch that is visible upon opening the door. It can be activated using a key. Below are relevant details: 1. The purpose of the child lock is to prevent active and unaware children from opening the door during driving when there are child passengers in the rear seats, thereby avoiding potential hazards. Once the child safety lock is engaged, the rear door cannot be opened from the inside even if the central locking system is not activated. 2. There are generally two types of child locks: one is an electronic lock, typically located in the window button area on the driver's side door; the other is a mechanical lock, usually found on the inner edge of the rear doors.

20

3

Share

Which is Safer: Electronic Parking Brake or Handbrake?

From a purely safety perspective, the electronic parking brake (EPB), also known as the electronic handbrake, is safer than the traditional mechanical handbrake. Below are some key points about parking brakes: 1. Mechanical handbrakes can only serve the purpose of parking or emergency braking, and they are prone to causing skidding or fishtailing during emergency braking. 2. Electronic handbrakes can integrate with various vehicle safety functions, such as the ESP (Electronic Stability Program) system, enhancing overall driving stability and safety. 3. Compared to traditional mechanical handbrakes, electronic handbrakes rely on electronic control units (ECUs) and electric motors to actuate the brake calipers. This makes them more prone to malfunctions over the vehicle's lifespan, with slightly lower functional reliability. Additionally, repair costs for electronic handbrakes are higher than those for mechanical ones.

18

3

Share

What is the substance applied to tires during car washing?

The product applied to tires during car washing is called tire protectant, also known as tire blackener. After application, the tires appear darker and shinier. Its primary function is to maintain the elasticity of the tire's molecular structure, thereby enhancing the tire's durability. Below is some information about car tires: 1. Car tires are one of the essential components of a vehicle, directly contacting the road surface. Together with the car's suspension system, they help absorb shocks during driving, ensuring a comfortable ride and smooth operation. 2. Car owners should increase their awareness of tire safety by regularly inspecting their tires, especially before highway trips. A thorough and detailed inspection is crucial. Beyond checking tire pressure, it's important to look for any cracks on the tire sidewalls and assess the tread wear. Any potential hazards should be addressed promptly.

13

5

Share

What is the 0-100 km/h acceleration time of the Geely Binrui?

How to manually adjust the backrest of the Trumpchi GS4 seat?

How Often Should Carbon Deposits in the Engine Be Cleaned?

How to Turn On the Low Beam Headlights on the Buick Encore?

Where is the child lock located on the Volkswagen Lavida?

Which is Safer: Electronic Parking Brake or Handbrake?

What is the substance applied to tires during car washing?

What is the difference between 1.5t and 1.5 in cars?

How to Reset the Ford Maintenance Light?

Which Country's Brand is Lynk & Co?

In which year were China IV vehicles produced?