What is the 0-100 km/h acceleration time of the Equinox?

2 Answers
Harold
07/29/25 8:30am
The 0-100 km/h acceleration time of the Equinox 1.5T model is 10.2 seconds, while the 2.0T model achieves it in 7.8 seconds. The 0-100 km/h acceleration refers to the time taken to accelerate from 0 to 100 km per hour, which is a direct reflection of a car's power. Generally, compact cars with 1.6L engines have 0-100 km/h acceleration times ranging from 11 to 13 seconds, while midsize sedans with 2.0T engines fall between 7 to 8 seconds. Supercars typically achieve this in less than 3.8 seconds. The Equinox is a midsize SUV officially released by Chevrolet, with body dimensions of 4646mm in length, 1843mm in width, and 1684mm in height, and a wheelbase of 2725mm. It is equipped with a 1.5T 169 horsepower L4 engine, paired with a 6-speed automatic transmission.
Was this review help?
18
5
Share
CorbinLee
08/11/25 6:01pm
The 0-100 km/h acceleration time of the Chevrolet Equinox varies significantly depending on the engine model. Based on my years of test driving experience, the entry-level version with the 1.5L turbocharged engine takes about 8 to 9 seconds, which isn't particularly fast but sufficient for daily commuting. The high-end 2.0L turbocharged engine performs much better, capable of reaching 6.5 to 7 seconds - a quite impressive figure for an SUV, delivering noticeable acceleration thrust. Acceleration is also affected by vehicle weight, road conditions, and driving style. For instance, performance weakens when fully loaded. If you're considering purchasing, I recommend test driving the high-end version to experience its responsiveness and stability. Remember to avoid aggressive throttle inputs on slippery surfaces - safety first.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

Why Did the Car Battery Suddenly Lose Power?

Reasons for a car suddenly losing power are as follows: 1. Battery aging "strike"; 2. Frequent stops and starts during short trips; 3. The car being parked for too long during holidays; 4. Multiple failed starts in low-temperature environments; 5. Frequent car starting; 6. Engine failure preventing charging; 7. Forgetting to turn off the air conditioning before shutting down the engine; 8. Forgetting to turn off lights and in-car electrical appliances; 9. Listening to high-power audio while idling. Precautions for a car losing power are as follows: 1. Avoid frequent starts. Some people keep trying to start the car if it doesn’t start within three to five seconds. Instead, wait for a while before trying again, as starting the car puts significant pressure on the battery, and frequent starts can greatly affect battery discharge and reduce its lifespan. 2. Turn off all electrical appliances before shutting down the engine. Some drivers often forget to turn off the car lights after shutting down the engine, leaving them on all night. The next day, they find the doors won’t open and the engine won’t start. However, most modern cars now have an automatic power-off function after shutting down, greatly reducing the occurrence of such situations.
20
4
Share

Can I change to the C2 test after passing the C1 subject one?

After passing the C1 subject one, you can change to the C2 test. Before scheduling the subject two test, you can apply to switch from C1 to C2, which requires resubmitting the application form and medical examination certificate. When changing from C1 to C2, the previously passed subject one score will be invalidated, and you will need to pay for the subject one training and examination fees before reapplying for C2. The specific requirements depend on the driving school's regulations. Subject One: Traffic regulations and related knowledge, also known as the written test, is scored out of 100, with 90 or above being a passing grade. Subject Two: Field driving, also known as the closed-course test, is conducted in a real vehicle. It is only graded as pass or fail. There are nine mandatory test items, including reverse parking in a garage, narrow road U-turns, parallel parking, stopping and starting on a slope, right-angle turns, curve driving, emergency braking, tunnel driving, and toll booth card collection. All nine items must be passed to successfully complete the subject two test.
8
5
Share

Is There a Difference Between Gasoline and Diesel Antifreeze?

Automotive antifreeze is universal and does not differentiate between diesel and gasoline engines. Here are some relevant details: 1. Antifreeze is categorized into light-duty and heavy-duty vehicle types. Heavy-duty vehicle antifreeze can be used in light-duty vehicles, but light-duty vehicle antifreeze cannot be used in heavy-duty vehicles. Additionally, different brands of antifreeze may have varying production formulas, which can lead to chemical reactions if mixed, so they should not be combined. 2. Antifreeze, short for antifreeze coolant, primarily consists of ethylene glycol and is used for maintaining the engine cooling system. It is also important not to mistakenly believe that antifreeze is only for winter use; vehicles require antifreeze year-round. Beyond preventing freezing, antifreeze has other main purposes: (1) Corrosion and rust prevention: Some metal components in a car can corrode over time, which directly affects the lifespan of the cooling system. Using water instead of antifreeze will only worsen this issue. (2) According to surveys, over 70% of automotive cooling systems suffer from scale and rust buildup, leading to issues like overheating, water shortage, cylinder sticking, and bearing wear. Antifreeze is essential for preventing these problems.
3
3
Share

Which car is referred to as the 'mobile big sofa'?

The 'mobile big sofa' refers to the Nissan Teana. Configuration of the Nissan Teana: The Nissan Teana is equipped with front and rear airbags for both driver and passenger, brake assist, ESP, rearview camera, cruise control, hill start assist, electric sunroof, keyless entry and start, multifunctional leather steering wheel, electric seat adjustment for both driver and passenger, a 7-inch central control screen, LED headlights, heated and power-folding side mirrors, automatic air conditioning, and more. Performance of the Nissan Teana: The Nissan Teana is powered by a 2.0L four-cylinder naturally aspirated engine paired with a continuously variable transmission (CVT), delivering a maximum power of 115 kW, a maximum horsepower of 156 PS, a maximum torque of 197 Nm, and a top speed of 197 km/h. It accelerates from 0 to 100 km/h in just 6.42 seconds and has a combined fuel consumption of 5.9L per 100 km.
1
5
Share

Is the RAV4 Engine Domestic or Imported?

The RAV4 engine is produced by FAW Tianjin Toyota and utilizes Toyota's production technology. Therefore, this engine is domestically manufactured. The RAV4 uses two engine models: the M20D-FKS and the A25B-FXS. The M20D-FKS engine delivers a maximum horsepower of 171 hp, with a peak power output of 126 kW and a peak torque of 209 N·m. The A25B-FXS engine provides a maximum horsepower of 178 hp, with a peak power output of 131 kW and a peak torque of 221 N·m. For daily maintenance of the RAV4 engine, the following methods can be employed: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD-SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB-CD grade diesel engine oil according to mechanical load, ensuring the standard meets or exceeds the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any lubricating oil will degrade over time. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may rupture or the safety valve may open, allowing oil to bypass the filter and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear, forming sludge. In small amounts, sludge remains suspended in the oil, but in larger quantities, it precipitates, clogging filters and oil passages, making lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits ensures proper engine operation and extends the lifespan of both the radiator and the engine.
8
4
Share

What is the fuel tank capacity of the Buick LaCrosse in liters?

Buick LaCrosse has 4 models currently on sale. Among them, the 552T version has a fuel tank capacity of 55 liters, while other versions have a 60-liter fuel tank. This data is officially released, and owners who have purchased the Buick LaCrosse can also check it on the vehicle's configuration sheet. All Buick LaCrosse models require 95-octane fuel. The 552T version has a fuel consumption of 6.5L per 100 kilometers, and a full tank can cover approximately 846km. Other versions consume 6.9L per 100 kilometers, with a full tank range of about 870km. During daily driving, it's essential to monitor the remaining fuel level regularly. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the actual fuel level. The fuel gauge usually has 5 to 6 segments, and it's advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel filled might exceed the marked capacity. This is because the fuel tank capacity marked by automakers is measured from the bottom of the tank to the safety level, leaving some space between the safety level and the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount filled may exceed the marked capacity.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.