What is the 0-100 km/h acceleration time of the Emgrand GS 1.4t?

1 Answers
DiLandon
07/29/25 2:47pm
According to official data, the 1.4T Emgrand GS has only one displacement variant, with a 0-100 km/h acceleration time of 13.13 seconds. The factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, and naturally, the faster the acceleration. The Emgrand S has a maximum torque of 235 Nm and a 0-100 km/h acceleration time of 13.5 seconds; the 1.4T turbocharged engine of the Emgrand GS delivers 141 horsepower and a maximum torque of 235 Nm, achieving a 0-100 km/h acceleration time of 13.13 seconds. Transmission efficiency: The transmission is the medium for power delivery and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The 1.4T Emgrand GS is equipped with a 6-speed manual transmission (MT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the
Was this review help?
10
3
Share
More Forum Discussions

What Causes the BMW 5 Series Headlights to Stay On?

BMW 5 Series headlights staying on may be due to a communication fault. Below are specific causes and solutions: 1. Specific Cause: When there is a LIN bus communication fault, the headlights remain illuminated as an intentional design by engineers. This serves as an emergency function to prevent headlight control failure when the headlight switch malfunctions or LIN bus issues occur. 2. Solution: Use waveform segment measurement to quickly locate the fault point, identify dormant or short-circuited wires, then remove and repair the footwell module. After repairing and reinstalling the computer board, the headlight function will be restored to normal operation.
10
3
Share

Why does Volkswagen require maintenance every 5,000 kilometers?

Generally speaking, regular car maintenance is necessary to ensure normal vehicle operation and extend its service life. Below are relevant details about car maintenance: 1. Maintenance intervals: The first maintenance is typically required at 5,000 kilometers or six months, while the second maintenance is usually due at 10,000 kilometers or one year. 2. Maintenance locations: You can choose either repair shops or 4S dealerships for maintenance. Repair shops offer faster service at lower costs, but with uncertain quality assurance. 4S dealerships provide warranty coverage but involve longer waiting times and higher prices.
11
5
Share

What are the symptoms of a bent connecting rod in a car?

The symptoms of a bent connecting rod in a car include unstable idle speed accompanied by shaking and vibration after the engine starts, as well as piston misalignment. The following are the causes of a bent connecting rod in a car: 1. Water entering the engine cylinder: Water entering the engine cylinder (combustion chamber) can cause the connecting rod to bend or break. When driving on roads with standing water, the engine may suck water into the cylinder. The water initially entering the cylinder quickly turns into vapor due to the high temperature of the cylinder block, preventing the formation of a combustible mixture in that cylinder. As more water enters, it accumulates on top of the piston, reducing the effective volume of the combustion chamber, increasing compression resistance, and raising the pressure transmitted from the piston to the connecting rod. 2. Abnormal engine fuel injection system: An abnormal engine fuel injection system can cause the connecting rod to bend or break. This usually occurs when the fuel injector of a particular cylinder continuously sprays fuel. Symptoms preceding this issue may include difficulty starting, idle shaking, black smoke from the exhaust pipe, and reduced power.
5
3
Share

Why is there no sound when playing music after Bluetooth connection in Volkswagen cars?

It may be due to incorrect connection methods or the need for software upgrades. Here is an introduction to car Bluetooth: 1. Introduction: Car Bluetooth is a wireless technology standard that enables short-distance data exchange between in-vehicle fixed devices and personal mobile devices, greatly facilitating practical functions such as file sharing and music playback. 2. Application: After successfully pairing the car navigation with Bluetooth, you can enter the dialing interface from the navigation main screen to make and receive calls, and also import the phone's contact list into the navigation device.
9
4
Share

What Problems Will Occur with Worn Car Clutch?

Problems that may occur with a worn car clutch are as follows: 1. Weak acceleration: When pressing the accelerator, the engine speed increases, but the vehicle speed does not go up. This is mainly due to clutch slippage, preventing the engine's power from being transmitted to the transmission. 2. Higher clutch pedal position: If the clutch disc is severely worn, the pedal will need to be lifted higher when releasing the clutch. Normally, the car can move forward with just a slight lift, but severe wear requires lifting much higher. 3. Burnt smell: If you notice a burnt smell while driving, it is also a sign of severe clutch disc wear. 4. Metal grinding noise: If you hear a metal grinding sound when pressing the clutch pedal, it is necessary to check the condition of the clutch disc. Such sounds usually indicate significant wear.
16
2
Share

Where is the timing mark for the 465 engine camshaft?

The timing mark for the Chang'an Star 465 camshaft is located directly below the arrow on the metal plate behind the timing gear. Below are the detailed specifications of the camshaft sensor: 1. Function: The camshaft sensor transmits the operational status of the cylinders to the ECU (Electronic Control Unit) to facilitate sequential fuel injection control, ignition timing control, and knock control. 2. Symptoms of failure: If the vehicle experiences difficulties in starting, unstable idling, engine shaking, poor acceleration, increased fuel consumption, or a persistently illuminated malfunction indicator light, it may indicate a faulty camshaft sensor. 3. Working principle: The camshaft position sensor detects the position and angle of the camshaft to determine the top dead center position of the first cylinder piston during compression. During startup, the engine ECU uses signals from the camshaft position sensor and the crankshaft position sensor to identify the position and stroke of each cylinder piston, enabling precise control of fuel injection and ignition sequences.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.