What is the 0-100 km/h acceleration time of the Chevrolet Equinox?

Is there any issue if I don't take the oath after passing Subject 4?

Not taking the oath after Subject 4 is fine. As long as you pass both the theoretical exam and the road test, you can obtain your driver's license. In other words, taking an oath is not required to receive your driver's license. Passing Subject 4 means you have already qualified for motor vehicle driving. Driver's licenses are issued on the spot in some places, while in others, they are distributed through driving schools or mailed to the students. Below are the details about Subject 4: Concept: Subject 4 is an additional safety and civilization knowledge test following the Subject 3 road test. Officially, there is no such term as 'Subject 4'. Exam Format: The test consists of 50 questions, presented in the form of case studies, images, animations, etc., with a full score of 100 and a passing score of 90. Exam Content: The main test content of Subject 4 includes safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.

5

3

Share

How to remove the cigarette lighter socket of Haval H6?

When removing the cigarette lighter of Haval H6, use a screwdriver to remove the panel at the cigarette lighter position. After removing the panel, you can see the cigarette lighter base and the power connection wire. After unplugging the power connection wire, use your hand to remove the fixing buckle, and the cigarette lighter will be successfully removed. More details are as follows: 1. The cigarette lighter is a component that all cars have, used to provide a fire source for the owner to light cigarettes. The cigarette lighter is a device specifically for lighting cigarettes. The power supply is generally 12V DC, which may vary in different car models. The central elastic head is the positive pole, and the two buckles (ears) are the negative poles. It is directly connected to the car battery, with the same current and power as the battery. 2. After some owners use the cigarette lighter to light cigarettes, some tobacco residue may remain on the heating wire. If it is inserted directly into the socket after use, dirt may accumulate in the socket over time. 3. If these dirt cannot be cleaned in time, they will gradually accumulate, eventually leading to poor contact in the socket, or even short-circuiting and burning out the fuse. Owners should try to use it less for lighting cigarettes and should clean it regularly, but avoid cleaning it immediately after use to prevent burning themselves.

3

1

Share

How to Replace the Key Battery for Honda Elysion?

Here are the steps to replace the key battery for Honda Elysion: 1. Press the switch on the back of the key, grasp the metal key head and pull it outward. 2. Insert the metal key into the gap and pry it left and right. 3. Once a gap appears, use your fingernail to pry it open. 4. The circular object is the button battery; remove the old one and replace it with a new one. 5. Then, cover the key case back and press it firmly. 6. Insert the metal key to complete the process. Here is more information about the Honda Elysion: 1. The Honda Elysion has dimensions of 4935mm in length, 1845mm in width, and 1805mm in height, with a wheelbase of 2900mm. 2. The overseas version of the Honda Elysion is equipped with a 2.4L engine paired with a 5-speed automatic transmission, offering both two-wheel-drive and four-wheel-drive variants. 3. The Honda Elysion retains the design of its concept car, with subtle adjustments in some details and the addition of chrome accents in multiple areas. 4. The dashboard of the Honda Elysion features a layered design.

17

4

Share

What to Do If the ETC License Plate Number is Entered Incorrectly?

If the ETC license plate number is entered incorrectly, you can go to the bank where you applied for the ETC or the local ETC service center to make the necessary changes. ETC Modification Process: Bring the vehicle registration certificate with the correct license plate number, driver's license, the bank card bound to the ETC, ID card, and ETC card to the corresponding bank or ETC management department to apply for modification. ETC Installation Process: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. The red light will briefly turn on, and the OLED screen will display "Tag Invalid" and "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the protective film on the back of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device.

12

4

Share

What Symptoms Indicate the Need to Replace Spark Plugs?

If your car experiences difficulty starting, reduced power, excessive exhaust emissions, or increased fuel consumption, it may be time to replace the spark plugs, as these are common symptoms of faulty spark plugs. Effects of Worn-Out Spark Plugs: Damaged spark plugs can lead to various issues, such as electrical leakage in the ignition system, higher fuel consumption, and decreased engine performance. The most critical problem is difficulty starting the engine, which can disrupt normal vehicle operation. Severe spark plug erosion—evident by pitting, electrode damage, or melting—indicates that the spark plugs are worn out and should be replaced. Steps to Replace Spark Plugs: Open the engine hood and remove the plastic cover of the engine. Disconnect the high-voltage wires, marking each cylinder's position to avoid confusion. Use a spark plug socket to remove each spark plug one by one. While removing them, check for external debris like leaves or dust and ensure the area is thoroughly cleaned. Insert the new spark plugs into the spark plug holes, hand-tightening them first before using the socket wrench to secure them. Reinstall the high-voltage wires in the correct firing order, then reattach the cover.

14

4

Share

Do I need to switch back to low beam before temporary parking after using high beam?

After using high beam, you need to switch back to low beam before temporary parking, then turn on the width light and hazard lights. Precautions for temporary parking: You can park in the far right lane. A yellow line drawn on the right side of the lane is a no-parking marking for motor vehicles, and parking there is considered illegal. Precautions for temporary parking: Even if there is a temporary parking sign in the motorway, parking is strictly prohibited within the yellow grid lines drawn on both sides of the lane, otherwise it will be considered illegal parking; bus stops, emergency stations, gas stations, fire hydrants or in front of fire stations and within 30 meters of the above locations, except for the use of the above facilities, parking is not allowed; intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels and within 50 meters of the above locations, parking is not allowed; when there is no distinction between the sidewalk and the roadway, park along the right side of the road, and when there is a sidewalk, park along the right side of the road. A solid yellow line is a prohibition line, serving as a warning not to cross. On roadsides with solid yellow lines, parking is strictly prohibited, including long-term and temporary parking.

14

3

Share

What is the 0-100 km/h acceleration time of the Chevrolet Equinox?

Is there any issue if I don't take the oath after passing Subject 4?

How to remove the cigarette lighter socket of Haval H6?

How to Replace the Key Battery for Honda Elysion?

What to Do If the ETC License Plate Number is Entered Incorrectly?

What Symptoms Indicate the Need to Replace Spark Plugs?

Do I need to switch back to low beam before temporary parking after using high beam?

What are the symptoms of engine blow-by?

What is the size of the Lavida's front windshield?

What is the fuel tank capacity of the GS4?

What does 'Application in Progress' mean for exam scheduling?