What is the 0-100 km/h acceleration time of the Changan Oshan X5?

2 Answers
McDelaney
07/29/25 8:41am
According to official data, the Changan Oshan X5 comes with two engine options: a 1.5T and a 1.6L. The 1.5T model achieves a 0-100 km/h acceleration time of 7.79 seconds, while the 1.6L model also reaches 7.79 seconds. Factors affecting the 0-100 km/h acceleration time of a vehicle are as follows: Torque: Torque, in simple terms, represents how much force the engine can generate. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Changan Oshan X5 1.5T has a maximum torque of 300 Nm, enabling a 0-100 km/h acceleration time of 7.79 seconds. Transmission efficiency: The transmission acts as a medium for power delivery and inevitably involves power loss. Higher transmission efficiency leads to better acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Changan Oshan X5 1.5T is equipped with a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. The Changan Oshan X5 1.5T has a power-to-weight ratio of 133 Hp/T, contributing to its 0-100 km/h acceleration time of 7.79 seconds.
Was this review help?
11
3
Share
CorbinFitz
08/11/25 6:16pm
I've driven the Changan Oushang X5 several times, and its official 0-100 km/h acceleration time is around 7.79 seconds, which indeed feels quite fast in real-world driving. Especially with that 1.5T turbocharged engine, the initial response is agile, making overtaking effortless, and it performs steadily on highways. However, there are many influencing factors, such as whether the road surface is slippery or if the car is fully loaded. When I tried it with a full load, it felt a tad slower. Maintaining proper tire pressure and engine cleanliness during maintenance is crucial, otherwise performance may decline. For daily commuting and family trips, this acceleration level is just right—not sluggish while still ensuring comfort. Overall, it offers great value for money and is highly recommended.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

What is the Principle of Auto Hold?

Auto Hold system works by utilizing the extended functionality of the electronic parking brake (EPB) through the brake management system to control the four-wheel brakes. The Auto Hold system is a technological application that enables automatic parking brake functionality while the vehicle is in operation. This technology allows drivers to avoid prolonged braking when the vehicle is stationary and prevents unnecessary rolling when the automatic electronic parking brake is engaged. The primary function of the Auto Hold feature is to prevent the vehicle from rolling backward, making it particularly useful on inclines and during frequent starts and stops. The Auto Hold system, together with the electronic parking brake, forms an intelligent brake control system that integrates temporary braking during driving with long-term parking braking after stopping, all achieved through electronic control for parking brake functionality.
18
3
Share

What is an OBU machine?

OBU is the card insertion machine for highway ETC systems. Utilizing DSRC technology, OBU establishes a microwave communication link with RSU, enabling vehicle identification and electronic toll deduction without stopping during travel. This achieves unmanned vehicle passage without the need to stop or take cards. The correct installation positions for OBU are: 1. Height not less than 1.2 meters and not exceeding 2.5 meters; 2. Installation angle should be between 30 to 90 degrees; 3. For cars and minivans, the OBU device should be installed on the upper middle part of the front windshield horizontally, while for large trucks and buses, the installation position should be on the lower middle part.
14
3
Share

How to replace the battery in a Zotye T700 key?

Method to replace the battery in a Zotye T700 key: Pry open the remote key along the middle gap, then remove the old battery to replace it with a new one. The Zotye T700 is a mid-to-large-sized SUV under the Zotye brand, with dimensions of 4748mm in length, 1933mm in width, and 1697mm in height. It is equipped with two types of engines: a 1.8-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.8-liter naturally aspirated engine delivers 177 horsepower and a maximum torque of 245 Nm, with a maximum power speed of 5800 rpm and a maximum torque speed range of 2000 to 4000 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block.
7
2
Share

Where is the OBU installed in a car?

OBU devices are mostly installed on the front windshield of the vehicle. Here is relevant information: 1. OBU On-board electronic tag. OBU devices are mostly installed on the front windshield of the car, communicating with the roadside unit RSU via microwave at toll stations. When the vehicle approaches the barrier, the RSU recognizes the signal from the OBU, and then automatically lifts the barrier to achieve the function of automatic passage control. 2. ETC: Electronic Toll Collection system, currently the most advanced toll collection method for roads and bridges in the world. It utilizes dedicated short-range microwave communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, supported by computer network technology and bank backend settlement processing.
20
4
Share

Is it better to have higher or lower tire pressure when driving on the highway?

It is better to have slightly higher tire pressure when driving on the highway, with an increase of 0.1 to 0.2 bar. The benefits are: 1. Reducing tire rolling resistance; 2. Decreasing fuel consumption. The effects of excessively high tire pressure include: 1. Reduced tire friction and adhesion, affecting braking performance and tire lifespan; 2. Decreased puncture resistance, increasing the risk of blowouts; 3. Accelerated wear on the central tread pattern, shortening tire life; 4. Reduced shock absorption, leading to increased body vibration; 5. Overstretching of tire cords, reducing tire elasticity.
20
1
Share

What is the function of damping sheets?

Damping sheets are used to reduce noise and vibration. Damping refers to the characteristic of any vibrating system where the amplitude of vibration gradually decreases due to external influences or inherent system properties, as well as the quantitative representation of this characteristic. The physical meaning of damping is the attenuation of force or the dissipation of energy during the movement of an object, effectively preventing further motion. Damping sheets are a widely used and highly efficient automotive soundproofing material, classified as viscoelastic materials, typically adhered to the inner surface of the vehicle's steel panels. Under normal circumstances, automotive damping sheets are made from polymer resin or rubber materials. Damping sheets made from asphalt can continuously emit unpleasant odors, leading to air pollution inside the vehicle and posing health risks to occupants.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.