What is the 0-100 km/h acceleration time of the Camry 2.0?

2 Answers
HadleyAnn
07/29/25 1:28am
The 0-100 km/h acceleration time of the Camry is 10.43 seconds. Relevant information is as follows: 1. Model: The Camry is a mid-size sedan under Toyota, with dimensions of 4885 mm in length, 1840 mm in width, and 1455 mm in height, and a wheelbase of 2825 mm. 2. Powertrain: The Camry is equipped with two engines, one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine. The 2.0-liter naturally aspirated engine has a maximum power of 131 kW and a maximum torque of 210 Nm, with the maximum power achieved at 6600 rpm and the maximum torque available between 4400 and 5200 rpm.
Was this review help?
1
4
Share
AidenLynn
08/12/25 5:36am
The Camry 2.0 accelerates from 0-100 km/h in around 10 seconds, though this figure can be affected by various factors. The most noticeable feeling when driving this car is its smooth start—there's no sudden surge of acceleration or strong G-force sensation, but it's perfectly adequate for everyday overtaking. The CVT transmission is tuned to be very smooth, delivering linear power output once the RPM climbs. A friend who bought this model last year tested it with a full load and air conditioning on, finding the acceleration about half a second slower. Tire pressure and road conditions can also impact performance. The car's strengths lie in its fuel efficiency and reliability—the 2.0L naturally aspirated engine paired with Toyota's proven powertrain means you can drive it for a decade with minimal maintenance concerns.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

Can You Still Drive When the OBD Light Is On?

You can still drive when the OBD light is on. Here is more information about OBD: 1. OBD is the On-Board Diagnostics system, displayed on the dashboard as a wrench-like symbol, also known as the engine fault light. 2. Another important function of OBD is to continuously monitor the engine's operating conditions and check whether the vehicle's exhaust emissions exceed the standard. If the emissions exceed the standard, a warning will be issued immediately. Reasons for the OBD light being on: Vehicle emission fault. Note: In Beijing, according to the "Beijing Air Pollution Prevention and Control Regulations," if car owners do not address the emission exceedance promptly, during the vehicle inspection, a general diagnostic tool can detect the mileage driven after the light came on, and they may face penalties during the annual inspection.
6
1
Share

What are the regulations for vehicle headlight modifications?

The regulations for vehicle headlight modifications are as follows: the wattage of the front headlights must not exceed 60W; the height should be moderate and must not affect the driving safety of others; the color temperature should not exceed 6000K, with the low beam not less than 1050 lumens and the high beam not less than 1450 lumens. Currently, common types of vehicle headlights include halogen headlights, LED headlights, and xenon headlights. Headlight modifications typically refer to replacing halogen headlights with LED or xenon headlights. Halogen lights are simple to manufacture, low-cost, easy to adjust and control in brightness, and have good color rendering, but they have a short lifespan and low luminous efficiency. LED headlights, on the other hand, have the advantages of long lifespan, high efficiency, and low energy consumption, but their drawbacks include high cost and poor heat dissipation. Xenon headlights offer high brightness and good color temperature, but they have the disadvantage of a delay when turning on. When modifying headlights, it is important to first pay attention to the brand and quality of the headlights. It is recommended to choose well-known brands from reputable manufacturers. Secondly, confirm the modification plan. For example, directly replacing halogen lights with LED lights is currently the mainstream primary modification method, as it is energy-saving, allows for non-destructive installation, is affordable, and improves performance. Another option is to modify LED lights with dual-lens systems, which not only enhances the width and distance of the light beam but also improves driving safety.
2
2
Share

What Causes Transmission Oil Leakage in the Tenth-Generation Accord?

The main reasons for transmission oil leakage in the tenth-generation Accord are as follows: 1. Damaged pipelines, causing oil to leak from the damaged areas during circulation. 2. The sealing gasket at the connection between the transmission and the engine is damaged or the fastening bolts are loose, leading to an enlarged connection gap, reduced sealing effectiveness, and oil leakage from the connection gap. Below is some relevant information about the Accord: 1. Body dimensions: The length, width, and height are 4893mm, 1862mm, and 1449mm respectively. The wheelbase is 2830mm. 2. Powertrain: Equipped with a 1.5T direct-injection VTEC turbocharged engine.
5
4
Share

What is the diagnostic method for ABS system failure?

ABS failure meaning: ABS failure indicates a malfunction in the vehicle's anti-lock braking system. When ABS fails, the ABS warning light illuminates. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to decelerate or adjust the vehicle's trajectory, posing significant safety risks. It is recommended not to continue driving under such circumstances and to resume driving only after the issue is resolved. Driving should not continue when the ABS system failure light is on, as it signifies a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to decelerate or adjust the vehicle's trajectory, posing significant safety risks. Where is the ABS sensor located in the car? The ABS sensor is located on the inner side of the car's tires and can be seen when the vehicle is lifted. There are three types of ABS sensors: linear wheel speed sensors, ring wheel speed sensors, and Hall-effect wheel speed sensors.
13
0
Share

Where is the child lock on the Polo car?

Volkswagen Polo's child safety lock prevents the rear doors from being opened from inside the vehicle. Its activation and deactivation mechanism is located on the side edge of the rear door, visible when the door is opened. Below are the relevant details: 1. Its function is to prevent active and unaware children from opening the door during driving when seated in the back, thereby avoiding potential dangers. Position A indicates the locked state, while position B indicates the unlocked state. 2. Specific method: To activate the child safety lock, insert the car key into the door slot and turn it to position B; to deactivate the child lock, turn the key back to position A. When the child lock is activated, the door can only be opened from the outside or by lowering the window glass and reaching for the door handle to open it.
6
2
Share

What are the functions of spark plugs?

Spark plugs function: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. After current passes through the terminal nut and central electrode, it ionizes the medium between the central electrode and ground electrode to generate a spark, thereby igniting the air-fuel mixture in the cylinder. What are spark plugs composed of: Spark plugs mainly consist of a terminal nut, insulator, terminal stud, center electrode, side electrode, and metal shell. What types of spark plugs exist: Main types of spark plugs include: standard spark plugs, projected insulator spark plugs, electrode-type spark plugs, seat-type spark plugs, pin-type spark plugs, and surface-gap spark plugs.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.