What is the 0-100 km/h acceleration time of the BYD Tang?

1 Answers
BradleyDella
07/29/25 8:28pm
According to official data, the BYD Tang is driven by two motors on the front and rear axles respectively, relying entirely on electric motor drive during initial acceleration. It is equipped with a 2.0T turbocharged engine with a maximum power of 141 kW, achieving a 0-100 km/h acceleration time of 4.5 seconds. The factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The BYD Tang has a maximum torque of 320 N·m, enabling a 0-100 km/h acceleration time of 4.5 seconds. Transmission efficiency: The transmission serves as the medium for power transfer, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency rankings are as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Audi A6's transmission is a 6-speed automatic manual transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The greater the power-to-weight ratio, the faster the acceleration.
Was this review help?
17
4
Share
More Forum Discussions

How to Activate the Horn Sound When Locking a Changan Vehicle?

To activate the horn sound when locking a Changan vehicle, follow these methods: You can hold down all four window lift buttons, wait until the windows are fully raised, continue holding for 5 seconds, then release and lock the car to complete the reset. Alternatively, you can use a computer to access the vehicle's hidden settings and check the corresponding option to activate the locking horn. Extension: Working Principle: When the horn button on the steering wheel or elsewhere is pressed, current from the battery flows through the circuit to the electromagnetic coil of the horn relay. The electromagnetic coil attracts the moving contact switch of the relay to close, allowing current to flow to the horn. The current causes the electromagnet inside the horn to operate, thereby vibrating the diaphragm to produce sound.
19
4
Share

Why does it take so long to pick up the BYD Qin?

Due to insufficient production capacity, here is the relevant information: Introduction: The BYD Qin is a high-performance sedan independently developed by BYD Co., Ltd., featuring the second-generation DM technology (capable of switching between pure electric and hybrid modes). Since forming a joint venture with Germany's Daimler, BYD's vehicle manufacturing processes have significantly improved. Exterior: The exterior design largely mirrors that of the Qin 100 model, featuring a multi-horizontal grille integrated with the headlights, which gives it high recognizability and a strong sense of unity. The rear continues to use an integrated taillight cluster, with a "5.9s" badge, highlighting the BYD Qin's rapid acceleration capability.
18
5
Share

Why is the handbrake light constantly on?

The reasons why the handbrake light remains on are as follows: 1. The handbrake is not fully released, and the vehicle is still in a braking state. 2. Insufficient brake fluid, with the brake fluid level below the safety line. 3. False alarm. It may be due to certain system malfunctions. Additional information: 1. For such occasional alerts, simply ensuring the handbrake is fully released or appropriately replenishing the brake fluid will suffice. 2. If the handbrake light is on accompanied by uneven braking, it is caused by inconsistent wear of the brake pads or uneven force distribution of the brake calipers. This situation requires immediate repair as it can endanger driving safety. 3. The handbrake, also known as the parking brake, functions to provide resistance when parking to prevent the car from rolling, equivalent to the parking gear in automatic transmissions, locking the drive shaft or rear wheels.
10
2
Share

How much fuel does a Santana consume per kilometer?

Approximately 11.7 liters per 100 kilometers. Below is relevant information about the Santana transmission: Working principle: Even when operating in manual mode, the Tiptronic system will intervene and execute gear shifts if the engine speed becomes too high and the driver fails to shift gears. Conversely, if the driver shifts gears at inappropriate engine speeds, the computer will immediately make judgments to prevent damage to the vehicle. Function: The older Volkswagen Santana 3000 is equipped with the 01N automatic transmission, which is a 4-speed fully electronically controlled automatic transmission. Its torque converter features a lock-up function. The 01N automatic transmission is compact in structure, rationally laid out, and highly efficient in power transmission. The transmission housing is of an integrated type, with internal components including planetary gears, valve body, clutch, and brakes.
19
3
Share

How to Remove Odors Inside a New Car?

Here are quick methods to eliminate odors in a new car: 1. Use bamboo charcoal bags, which have strong odor-absorbing capabilities and are highly effective with long-lasting results. 2. Before driving, open the doors and windows to allow fresh air to dilute and disperse toxic gases inside the cabin. Keep windows open as much as possible while driving. 3. Use fruit peels, such as pomelo or lemon, which also help neutralize odors. Additional information on new car odors: 1. During manufacturing, materials like leather, plastic panels, soundproofing cotton, adhesives, and asphalt are used, all of which may release odors such as formaldehyde. 2. The confined space inside a car with poor air circulation makes it difficult for odors to dissipate, resulting in a pungent smell upon entering the vehicle.
13
2
Share

What are the precautions for timing belt alignment on the Subaru Forester?

For the Subaru Forester, when aligning the timing belt, it is necessary to ensure that the No. 1 piston is at the top dead center of the compression stroke. Below are the specific details of the Subaru Forester: 1. SGP Platform: The Forester adopts the all-new SGP platform, significantly enhancing its safety. The proportion of high-tensile steel plates used has also increased considerably, improving collision safety performance while also being more lightweight. 2. Driver Assistance System: Equipped with the EyeSight driver assistance system, the Forester adds a rear monitoring system to prevent collisions from the rear. 3. Driver Monitoring System: The Forester is equipped with Subaru's latest driver monitoring system. When the driver's condition is poor or fatigued, the system can provide alert reminders to prevent accidents.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.