What is the 0-100 km/h acceleration time of the BMW X5?

What is the weight of the Volkswagen Bora?

The weight of the Volkswagen Bora is 1,315 kilograms. It has advantages in the following aspects: First, in terms of appearance. The development of the Bora was inspired by the traditional Chinese lion dance. Viewed from a 45-degree angle at the front, the new Bora appears more majestic and dignified, with lion-eye-style headlights exuding a sense of intimidation. From the side, the body lines of the new Bora are more fluid and elegant, appearing more elongated, showcasing the agility and power of the lion dance in motion and stillness. Second, it is equipped with the EA111 series 1.4TSI turbocharged engine produced by FAW-Volkswagen's Dalian engine plant. The Volkswagen 1.4TSI engine delivers a maximum power of 96 kW at 5,000 rpm and a peak torque of 220 Nm sustained between 1,750-3,500 rpm, with an output power that even surpasses that of a typical 2.0L naturally aspirated engine. Third, it has a short 0-100 km/h acceleration time. The Bora 1.4TSI Sport version can accelerate from 0-100 km/h in about 10 seconds, which basically meets the power demands of daily driving and even some sporty driving.

13

2

Share

What does the yellow exclamation mark in Lavida mean?

When a yellow exclamation mark appears on the car dashboard, there are four possible scenarios: general fault, automatic transmission fault, abnormal tire pressure, and lighting fault. Below is a detailed analysis of these four situations: General Fault: A triangle with an exclamation mark inside indicates a general performance or component malfunction. Possible issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. Transmission oil should be replaced promptly. Abnormal Tire Pressure: A horizontal line with an exclamation mark inside parentheses represents the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. Additionally, a red exclamation mark inside a circle with parentheses indicates a brake system warning, which could mean a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is necessary to avoid accidents.

18

2

Share

What is the wading depth of the BYD Song Plus DMI?

The wading depth of the BYD Song Plus DMI is 150mm. The safe wading depth is the distance of the vehicle's ground clearance. If the water depth exceeds two-thirds of the wheel height after entering the water, it exceeds the safe range, and water may enter the interior. If the water depth exceeds the front bumper or approaches the front grille position, it will directly cause water to enter the engine, damaging the vehicle. If the vehicle stalls in deep water, water entering the exhaust pipe and flowing back into the engine may severely damage the vehicle. There are three scenarios of water submersion: water level above the exhaust pipe but below half-wheel height, water level exactly at half-wheel height, and water level above half-wheel height. Generally, water reaching exactly half-wheel height will affect the car. Below is the detailed explanation: 1. Water level above the exhaust pipe: If the water only covers the exhaust pipe, promptly moving the car away is sufficient. Water covering the exhaust pipe won't be sucked back into the engine, and engine stalling is mainly due to water entering the engine intake system, unrelated to the exhaust pipe being submerged. 2. Water level exactly at half-wheel height: If the water is exactly at half-wheel height, the car usually won't leak; however, if soaked for a long time with aging seals, leakage may occur. In such cases, drive the car to a 4S shop, disassemble the interior, clean, and dry it. 3. Water level above half-wheel height: If the water exceeds half-wheel height, the engine may take in water, and the interior may also leak. Never start the engine in this situation to avoid burning out the engine or interior electronics. Moreover, if the car is submerged, damage caused by ignition won't be covered by insurance.

16

1

Share

What is the real fuel consumption of the Roewe i6max?

The comprehensive fuel consumption of the Roewe i6max is 5.9L/100km. There are currently 4 models of the Roewe i6max on sale: the Cool Edition, Cool Intelligent Driving Edition, Cool Panoramic Sunroof Edition, and Cool Panoramic Sunroof Intelligent Driving Supreme Edition, all with a comprehensive fuel consumption of 5.9L/100km. The above figures are based on the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 5.9-6.1L/100km. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking, making it more fuel-efficient. By anticipating road conditions and applying slow and even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular vehicle maintenance or checks: Timely oil changes can reduce carbon buildup (carbon buildup can cause ignition issues, sluggish acceleration, increased fuel consumption, and even cylinder misfires in severe cases). Regularly check and replace the air filter, clean or replace the fuel injectors, spark plugs, and throttle body as per the recommended mileage. Keep windows closed while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.

9

5

Share

How to Use Cruise Control in CRV?

Using cruise control in a CRV involves the following three steps: 1. Press the brake pedal, push the one-touch start button, and then press the CRUISE button on the steering wheel. 2. When the vehicle speed reaches above 40km/h, press the –/SET button. 3. To set the desired speed, remove your foot from the accelerator pedal and press the RES/+/SET/- button downward, then release to complete the setting. The function of cruise control is to automatically maintain the vehicle speed as set by the driver without the need to press the accelerator pedal, allowing the vehicle to travel at a constant speed. With this feature, drivers no longer need to control the accelerator pedal during long highway drives, reducing fatigue and unnecessary speed changes, which can save fuel.

17

1

Share

Is It Normal for Fogging in MG HS Headlights?

Fogging in MG HS headlights is normal. The main reasons for this are: 1. Recent heavy rainfall. 2. High moisture content in the air, which enters the headlight and condenses on the lens. If this occurs, you can wait a few days for it to disappear naturally if you're not in a hurry. If you need it gone quickly, you can use a hairdryer on medium heat to blow it away, and the fogging will disappear. Headlights are not completely sealed from the outside because when the lights are on, the internal temperature rises significantly, requiring ventilation to release heat. After turning off the lights, air needs to enter to balance the internal and external pressure. This necessitates ventilation ports in the headlights, which are designed to balance airflow and sealing performance to prevent water ingress. If water enters the headlight, it indicates a sealing issue and is a quality problem.

11

4

Share

What is the 0-100 km/h acceleration time of the BMW X5?

What is the weight of the Volkswagen Bora?

What does the yellow exclamation mark in Lavida mean?

What is the wading depth of the BYD Song Plus DMI?

What is the real fuel consumption of the Roewe i6max?

How to Use Cruise Control in CRV?

Is It Normal for Fogging in MG HS Headlights?

What are the best tires for RAV4?

What is the introduction to the Buick brand?

How to Reset the Maintenance Reminder on a BMW?

Is the Roewe RX5 equipped with a joint-venture engine?