What is the 0-100 km/h acceleration time of the Audi S4?

1 Answers
KalebDella
07/30/25 7:01am
The 0-100 km/h acceleration time of the Audi S4 is 4.7 seconds. The 0-100 km/h acceleration refers to the time it takes for a vehicle to accelerate from 0 to 100 kilometers per hour, which is a direct reflection of the car's power. The Audi S4 is a mid-size car with dimensions of 4770mm in length, 1847mm in width, and 1404mm in height, with a wheelbase of 2825mm and a trunk capacity of 480 liters. The Audi S4 features a five-link independent suspension at the front and rear, and is powered by a 3.0T turbocharged engine that delivers a maximum horsepower of 354 PS, a maximum power of 260 kW, and a maximum torque of 500 Nm. It is paired with an 8-speed automatic transmission.
Was this review help?
7
4
Share
More Forum Discussions

Does the 2021 Sylphy Classic new car need a break-in period?

2021 Sylphy Classic new car requires a break-in period. Precautions during the new car break-in period: 1. Generally, new cars within 5,000 kilometers are in the break-in period; 2. During the break-in period, try to avoid driving at high speeds above 90 km/h; 3. When the new car has driven about 5,000 kilometers and is about to complete the break-in period, the owner can briefly run the engine at speeds above 4,000 rpm; 4. The purpose of accelerating near the end of the break-in period is to reduce carbon deposits and improve engine performance.
5
4
Share

Is the four-wheel drive version of the Audi A4L a part-time four-wheel drive system?

The four-wheel drive version of the Audi A4L uses a part-time four-wheel drive system. Engines used in the Audi A4L: This car is equipped with three engines in total: a low-power 2.0-liter turbocharged engine, a medium-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine. Only the models equipped with the medium-power 2.0-liter turbocharged engine and the high-power 2.0-liter turbocharged engine have the four-wheel drive version. The high-power 2.0-liter turbocharged engine in the Audi A4L delivers 252 horsepower and a maximum torque of 370 Nm. This engine features hybrid injection technology and uses an aluminum cylinder head and an iron cylinder block. Transmission matched with the Audi A4L: A dual-clutch transmission is a product developed based on a manual transmission. The structure of this transmission is similar to that of a manual transmission. A dual-clutch transmission can improve the car's shifting speed and transmission efficiency. Cars equipped with a part-time four-wheel drive system do not always have power on all four wheels. Most of the time, these cars operate in two-wheel drive mode.
10
1
Share

What grade of gasoline should be used for Honda CRV?

Dongfeng Honda CRV is suitable for 92 octane and above unleaded gasoline. Engine: Dongfeng Honda CRV is equipped with 2.0 and 2.4 displacement engines. The 2.0L DOHC i-VTEC engine has a maximum power of 110kW/6500rpm and a maximum torque of 190N·m/4000rpm. Naturally aspirated engines, unlike turbocharged engines, do not require higher-grade gasoline, but this does not mean that 95 octane gasoline cannot be used. Higher-grade gasoline will make the engine more stable and slightly improve performance. Other grades of gasoline: Low compression ratio engines are mostly installed in low-end vehicles, and most of them use 92 octane gasoline. If 95 or 98 octane gasoline is used, the higher the octane number, the better the stability, at least it is difficult to cause the engine to malfunction due to detonation. If high-grade gasoline is added to a low compression ratio engine, the fuel will not burn completely, wasting power and making it more prone to carbon deposits. If low-grade gasoline is added to a high compression ratio engine, the consequences are more severe than the first case, and the vehicle is prone to detonation, engine vibration, and other problems in a short time. Do not use low-grade gasoline to save trouble or money, otherwise, the engine is prone to malfunction.
18
5
Share

Why doesn't the air conditioning cool properly when turned on in the car?

Excessive lack of refrigerant leads to reduced cooling effectiveness. Here is relevant information: 1. Other causes: Excessive impurities in the refrigerant and refrigeration oil can cause minor blockages, resulting in insufficient cooling capacity. Insufficient refrigerant leads to inadequate cooling. A dirty condenser or a loose compressor drive belt can also cause the air conditioning to not cool properly. 2. Refrigerant: Refrigerant loss is mainly due to leaks. Damage to the air conditioning flap motor is a relatively rare issue, but it does occur. The purpose of cleaning the radiator and condenser is primarily for heat dissipation. In spring, cotton-like seeds from poplar and willow trees sticking to the condenser can cause issues such as excessively high engine temperatures or poor air conditioning performance.
6
2
Share

What does AQS mean for Geely cars?

The APS on the car's center console stands for Accelerator Pedal Sensor. Additional information: 1. The accelerator pedal, also known as the throttle pedal, primarily controls the opening of the engine throttle valve, thereby regulating the engine's power output. Traditional accelerator pedals are connected to the throttle valve via throttle cables or linkages. 2. With the continuous advancement of automotive electronic technology, electronic throttles are becoming increasingly widespread. When a driver presses the accelerator pedal of an electronic throttle, it essentially sends a throttle pedal position sensor signal to the engine ECU. 3. The accelerator pedal mainly controls the throttle valve's opening to regulate the engine's power output. In some vehicles, the accelerator pedal is connected to the engine's throttle valve via throttle cables or linkages, and when the driver presses the accelerator pedal, it directly controls the throttle valve.
9
1
Share

What to Do When the Turn Signal Goes Out While Pulling Over

When the turn signal goes out while pulling over, it needs to be reactivated. The reasons and methods are as follows: 1. Failure to reactivate the signal may result in penalty points: During the driving test (Subject 3), after confirming the parking spot and before preparing to park, the right turn signal must be turned on. Not activating the signal will lead to penalty points. 2. Additional tips: Use your hand to hold the signal lever in place to prevent it from resetting. During the test, when signaling, you can use two fingers to keep the lever from returning to its original position. 3. Other scenarios: Normally, when adjusting direction while pulling over, the turn signal will automatically reset when the steering wheel is straightened. If the turn signal does not turn off after steering correction, simply turn it off before shutting off the engine.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.