What is the 0-100 km/h acceleration time of the Audi RS7?

1 Answers
StMargaret
07/29/25 5:12pm
According to official data, the Audi RS7's 0-100 km/h acceleration time is 3.6 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in naturally faster acceleration. The Audi R8 has a maximum torque of 570 Nm and a 0-100 km/h acceleration time of 3.1 seconds. The Audi RS7 has a torque of 800 Nm and a 0-100 km/h acceleration time of 3.6 seconds. Transmission efficiency: The transmission is the medium for power delivery, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Audi RS7 is equipped with an 8-speed automatic manual transmission (AT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Audi R8 has a power-to-weight ratio of 373 Hp/T and a 0-100 km/h acceleration time of 3.1 seconds. The Audi RS7 has a power-to-weight ratio of 171 Hp/T and a 0-100 km/h acceleration time of 3.6 seconds.
Was this review help?
3
5
Share
More Forum Discussions

What is the brake-pads-worn warning light?

brake-pads-worn is the warning light for brake pad wear. Mileage: Under normal driving conditions, the front brake pads should be replaced approximately every 30,000 to 50,000 kilometers, and the rear brake pads every 60,000 to 100,000 kilometers. Once severe brake pad wear is detected, they should be replaced promptly. Degree of wear: Typically, new brake pads are about 1.5 centimeters thick. If they wear down to one-third of their original thickness, or less than 5 millimeters, it is recommended to replace them immediately. If a metallic scraping sound is heard during braking, this may indicate that the brake pads have worn down to their minimum thickness, causing the wear indicators to contact the brake disc and produce noise—prompt replacement is necessary. If the brake pedal feels lighter than usual, or if braking becomes difficult or ineffective, this suggests severe brake pad wear and insufficient thickness, requiring immediate replacement.
6
4
Share

How to Unlock the Anti-Theft Lock on a Buick LaCrosse?

To unlock the anti-theft lock on a Buick LaCrosse, follow these steps: 1. First, start the vehicle and then press and hold the menu control button on the right multifunction menu. 2. Next, click the close button on the left multifunction steering wheel to deactivate the anti-theft system. 3. Then, observe the vehicle's dashboard to confirm that the anti-theft indicator light has turned off. Additional information about anti-theft locks is as follows: 1. Depending on the principle of the lock core, anti-theft locks can be categorized into pin tumbler locks, wafer locks, magnetic locks, IC card locks, fingerprint locks, etc. 2. The most common type of composite lock on the market is a combination of pin tumbler locks and magnetic locks, which professionals refer to as magnetic composite locks. To open such a lock, one must first disrupt the lock's magnetic properties before proceeding with technical unlocking.
9
2
Share

Does the Three-Way Catalytic Converter Need Cleaning?

The three-way catalytic converter needs cleaning. It is the most important external purification device installed in the automobile exhaust system, and regular cleaning is necessary to ensure its exhaust function. The cleaning method for the three-way catalytic converter is as follows: 1. Place the removed three-way catalytic converter upright in a container. 2. Shake a bottle of three-way catalytic cleaner well and pour it into the high-pressure spray gun's container, then tighten it. 3. Connect the air hose and spray evenly onto the inner grid of the three-way catalytic converter. More information about the three-way catalytic converter is as follows: 1. The three-way catalytic converter primarily oxidizes carbon monoxide, hydrocarbons, and nitrogen oxides. 2. The three-way catalytic converter is the most important external purification device installed in the automobile exhaust system. It converts harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions.
19
3
Share

Where is the trunk switch of Qoros 3 located?

The trunk switch of Qoros 3 is located on the ceiling inside the car, at the position of the roof light (i.e., the console next to the sunroof). The button in the middle of the reading light is the trunk switch. The car trunk is essentially the vehicle's storage compartment, where various items can be placed. Here are some details about Qoros 3: 1. Interior: The interior space of Qoros 3 is very spacious, with the entire center console panel designed with a minimalist approach. The top edge features air vents, and the middle section is equipped with an 8-inch touchscreen display. 2. Configuration: Qoros 3 comes standard with an 8-inch capacitive screen, an onboard Bluetooth system, a USB port that supports iPod playback, and an AUX audio input port. Except for the entry-level 1.6L manual model, the other five models are also equipped with ESC/TCS/CBC, front dual airbags, front side airbags, and dual-zone independent control automatic air conditioning.
7
1
Share

What are the hidden features of the base model New Santana?

The hidden features of the New Santana include auto-locking, single-door unlocking, auto-unlocking, horn sound when locking, emergency brake flashing lights, and changing turn signals from three flashes to five. Below are the detailed specifications of the New Santana: 1. Configuration: The New Santana series is equipped with RKA tire pressure monitoring as standard, along with safety features such as ESP electronic stability program, HBA emergency brake assist, and ASR traction control system. 2. Powertrain: It is powered by a 1.5L naturally aspirated engine. The National V version delivers a maximum power of 81kW (110PS) and a peak torque of 150N·m, while the National VI version offers a maximum power of 82kW (111PS) and a peak torque of 145N·m. It is paired with either a 5-speed manual or a 6-speed automatic transmission.
11
2
Share

Where is the engine serial number located on the Volkswagen Sagitar?

The engine serial number of the Volkswagen Sagitar is located at the junction between the engine and the transmission. Below are the specific details about the Sagitar: 1. Vehicle Positioning: The Sagitar is a joint-venture A+ class sedan brand under FAW-Volkswagen, classified as a compact car by Volkswagen. 2. Configuration: The entire series comes standard with integrated LED headlights for both low and high beams. High-end models feature a grille ambient light design, along with MDFS intelligent dynamic headlight assist system and AFS headlight steering system. 3. Interior: The interior combines soft-touch materials and piano black lacquer panels. High-end models are equipped with a 10.2-inch Active Info Display dashboard and an 8-inch multimedia screen, angled towards the driver's side, supporting Apple CarPlay connectivity. Base models do not include a multimedia screen, and the air conditioning panel uses touch-sensitive buttons. Mid and low-end models feature traditional mechanical instrument clusters.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.