What is the 0-100 km/h acceleration time of the Arrizo 5 Plus?

1 Answers
DelHarley
07/29/25 5:10pm
According to official data, the Arrizo 5 Plus accelerates from 0 to 100 km/h in 12.6 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, naturally resulting in faster acceleration. The Chery Tiggo 3 has a maximum torque of 230 Nm and a 0-100 km/h acceleration time of 13.14 seconds. The Arrizo 5 Plus also has a torque of 230 Nm, with a 0-100 km/h acceleration time of 12.6 seconds. Transmission efficiency: The transmission is the medium for delivering power and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Arrizo 5 Plus is equipped with a 9-speed continuously variable transmission (CVT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Chery Tiggo 3 has a power-to-weight ratio of 169 Hp/T and a 0-100 km/h acceleration time of 13.14 seconds. The Arrizo 5 Plus has a power-to-weight ratio of 153 Hp/T, with a 0-100 km/h acceleration time of 12.6 seconds.
Was this review help?
5
1
Share
More Forum Discussions

What does a flashing red dot in a car mean?

A flashing red dot in a car indicates that the vehicle's anti-theft function is activated. This indicator light flashes after locking the car, which is a normal phenomenon. If the light does not flash, it means the car is not properly locked or there is a malfunction in the anti-theft system. The car anti-theft system is a mechanical device and electronic product installed in the vehicle to increase the difficulty of theft and prolong the time required for theft. The car anti-theft system consists of an electronically controlled remote or key, electronic control circuit, alarm device, and actuators. The earliest car door locks were mechanical, only used to prevent doors from opening automatically while driving to avoid accidents, serving only for driving safety and not for theft prevention. Anti-theft door locks control only one door, while other doors are opened or locked using the door lock button inside the vehicle. Car anti-theft tips: Manual check after locking: Drivers are advised to develop the habit of manually checking whether the doors and trunk are properly locked after using the remote lock; Park in a safe place: It is best to park the car in a parking lot with fixed staff. In unattended environments, the safety factor is higher. Do not leave valuables in the car: No matter where the car is parked, do not leave personal belongings and valuables in the car, such as handbags, wallets, mobile phones, etc.; Install an anti-theft alarm: A car anti-theft alarm is also a useful tool. When a thief illegally enters the vehicle, a screaming anti-theft alarm can effectively increase the psychological burden on the thief.
10
4
Share

Can Car Covers Protect Against Sunlight?

Car covers can protect against sunlight. Car covers have multiple functions including being environmentally friendly, waterproof, sandproof, dustproof, frostproof, heat-insulating, cooling, sun protection, and privacy protection. Functions of car covers: Car covers can reduce UV exposure: Car covers are made by manufacturers using specialized sun-protective fabrics, which can effectively block UV rays by reflecting or absorbing them. Car covers can prevent interior aging: In summer, the interior temperature of a car can reach 70-80°C, but with a car cover, the temperature inside the car can be maintained at around 30-40°C, which is more comfortable for humans. Car covers can extend the lifespan of car components: By controlling the temperature, car covers can enhance the durability of car parts. They protect the car paint, windshield wipers, air conditioning system, engine, and other accessories. Precautions for using car covers: Do not use a car cover immediately after parking in summer, as it may affect heat dissipation and reduce the cover's lifespan. For example, aluminum-coated car covers have excellent heat insulation, but using them immediately after parking can trap heat inside the car. In winter, in northern regions, using a car cover immediately after parking may cause ice to form on the hood or damage the cover's lining due to temperature differences between the hood and the cover, leading to condensation. Secure the car cover during strong winds, and avoid using it during typhoons. Car covers usually come with windproof straps, but since they are made of multiple fabric panels stitched together, strong winds from certain angles can damage the cover over time, affecting its reuse.
2
5
Share

Where to Check the Car Model?

To check the car model, you can refer to the vehicle identification plate, which details the manufacturing date, engine displacement, power (KW), and other parameters. The location of the plate varies by vehicle but is generally found on the lower part of the passenger side door; opening the door will reveal it. The car model is a unique identifier assigned to a class of vehicles, consisting of pinyin letters and Arabic numerals. According to national standards, domestic car models should indicate the manufacturer, type, and key characteristic parameters. The vehicle identification plate is a label that displays the vehicle's basic features, including the manufacturer, model, engine power, total mass, load capacity or passenger capacity, serial number, manufacturing date, and manufacturer's name. Vehicle Identification Number (VIN) coding rules: Positions 1-3 represent the World Manufacturer Identifier (WMI), indicating the vehicle's manufacturer. Positions 4-8 (VDS) describe the vehicle's characteristics, such as type and body style. Position 9 is a check digit, calculated to prevent input errors. Position 10 indicates the model year, as designated by the manufacturer (Model Year), which may not match the actual production year but usually does not differ by more than one year. Position 11 identifies the assembly plant. Positions 12-17 are the serial number. Typically, vehicle recalls target a specific range of serial numbers, corresponding to a particular batch of vehicles.
7
4
Share

What are the reasons why a car won't start in the morning?

There are many reasons why a car won't start in the morning, including low engine temperature, dead car battery, no fuel in the engine, faulty spark plugs, etc. Specific reasons why a car won't start in the morning: Engine temperature too low: Most mornings are cold, and when the car is cold-started, the engine temperature does not reach the normal standard, so symptoms such as difficulty starting the car or engine shaking after starting may occur. Dead car battery: If the car battery is dead, the car naturally won't start. This situation requires charging the battery. It's important to note that if the car is not used for a long time, it must be started regularly to ensure the battery and engine can remain in normal working condition. If no issues arise, the battery can be removed to avoid power loss incidents. No fuel in the engine: A car without fuel in the engine certainly won't start. This situation requires refueling the car. It's important to note that you should refuel in advance to avoid unnecessary trouble. Faulty spark plugs: If the spark plugs have issues, the fuel cannot ignite, and the car won't start. In this case, replace the spark plugs with new ones. Precautions for starting a car: The starter should not be engaged for more than 5 seconds at a time. Before starting again, wait for 2 minutes to allow the battery to recover. If a third attempt is needed, wait for 15 minutes after checking and resolving any faults before starting again. In winter or under low-temperature conditions, especially for older cars, necessary measures should be taken to avoid continuous cranking. After the engine starts, the starter control circuit must be immediately cut off to stop the starter. Carefully inspect the surroundings of the car, paying attention to any obstacles under the car or around the body.
19
1
Share

What is the best location to place a car fire extinguisher?

Car fire extinguishers should be placed in easily accessible locations such as beside the driver's seat, in the center console, or in the glove compartment of the passenger seat. The purpose is to quickly grab the extinguisher in case of a fire, as every second counts during fire suppression. If the extinguisher is placed in the trunk, the response time will be significantly delayed. Although the car fire extinguisher should be within easy reach, it is strictly prohibited to place it directly on the dashboard. This is because the extinguisher can roll freely, and if it falls off the dashboard while driving and rolls onto the accelerator or brake pedal, the situation can become extremely dangerous. The car fire extinguisher must be securely fixed to prevent it from rolling around inside the vehicle. Types of fire extinguishers and their usage: Currently, portable fire extinguishers are commonly used for automotive fire protection. The main types of car fire extinguishers available on the market include dry powder extinguishers, ultra-fine dry powder extinguishers, carbon dioxide extinguishers, and water-based extinguishers. To use the extinguisher, carry it to a spot near the fire, stand upwind, pull out the safety pin, hold the nozzle with one hand and the handle with the other, aim the nozzle at the base of the flames, and sweep from side to side.
18
5
Share

Does the car support FLAC?

Whether a car supports FLAC depends on the specific model. Some car models can play FLAC format files, while others cannot. Here are the details about the FLAC format: Introduction to FLAC: FLAC is a lossless compression format. Audio encoded and compressed in FLAC does not lose any information. When a FLAC file is restored to a WAV file, it is almost identical to the original WAV file before compression. If a car does not support the FLAC format: You can use format conversion software to convert the file format for playback. The loss after conversion is minimal, and the change in sound quality is barely noticeable. If the car's music player does not support the FLAC format: It depends on whether the player installed in the car supports FLAC. If it does not support FLAC playback, you can convert the file to MP3 or WAV format for playback. Steps to convert FLAC to MP3 using GoldWave V5.70 (Chinese green version): Extract the downloaded compressed package, find the GoldWave.exe program and open it (the software is a green version and does not require installation). Open the FLAC lossless audio file, click the "File" option at the top, and find "Save As." Click on it, select the MP3 save path, then pull down the menu for "Save as type" and find [MPEG Audio], select it. Scroll through the [Quality] menu to choose the desired parameters (Hz, kbps—the higher the value, the better the sound quality), then save. Wait for the conversion to complete, and copy the converted MP3 to the desired device.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.