What is the 0-100 km/h acceleration time of the ALPINA B5?

1 Answers
AmyFitz
07/29/25 7:28pm
According to official data, the ALPINA B5 accelerates from 0-100 km/h in 4.2 seconds. The factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the greater the force pushing the vehicle, and naturally, the faster the acceleration. The BMW 5 Series has a maximum torque of 290 Nm and a 0-100 km/h acceleration time of 8.6 seconds; the ALPINA B5's 4.4-liter twin-turbocharged engine delivers 507 horsepower and a maximum torque of 700 Nm, achieving a 0-100 km/h acceleration time of 4.2 seconds. Transmission efficiency: The transmission is the medium for transferring power, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The ALPINA B5 is equipped with an 8-speed automatic transmission (AT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The greater the power-to-weight ratio, the faster the acceleration. The BMW 5 Series' power-to-weight ratio is...
Was this review help?
8
5
Share
More Forum Discussions

How to Fix a Volkswagen Sharan Sunroof That Won't Close?

The solutions for a Volkswagen Sharan sunroof that won't close are: 1. Check for any debris blocking the mechanism and clean it thoroughly; 2. Apply lubricant to the sunroof tracks; 3. If the sunroof seal strip is lifted or displaced, spray a small amount of plastic protectant or talcum powder on the sealing components. Taking the 2018 280TSI Enjoy 7-seater model as an example: The Sharan is a 5-door, 7-seat MPV with dimensions of 4854mm in length, 1904mm in width, and 1740mm in height, and a wheelbase of 2920mm. This vehicle is equipped with a 1.4T inline 4-cylinder engine and a 6-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. It features front-wheel drive, with a front MacPherson strut independent suspension and a rear multi-link independent suspension.
3
0
Share

What is the real fuel consumption of the Emgrand S?

The comprehensive fuel consumption of the Emgrand S is 5.9L/100km. Currently, there are 4 models of the Emgrand S available for sale: CVT Flagship, CVT Luxury, CVT Premium, and Manual Comfort, all with a comprehensive fuel consumption of 5.9L/100km. The above figures are NEDC comprehensive fuel consumption, which are the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 6.0-7.6L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, early braking: When driving, gently press the accelerator to avoid sudden increases in engine speed and prevent the car from shaking during driving, making the car more fuel-efficient. By anticipating road conditions and adopting slow and uniform acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Regular oil changes can reduce carbon deposits (carbon deposits can cause poor ignition, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires); regular checks and timely replacement of dirty air filters, cleaning or replacement of fuel injectors, spark plugs, and throttle bodies at specified mileage intervals. Close windows while driving. Driving with windows open increases wind resistance, and greater wind resistance means more resistance for the car, requiring more power and thus increasing fuel consumption.
11
1
Share

Is driving a new car at 160 km/h harmful?

Generally, driving a new car at 160 km/h won't cause significant damage, but it's recommended to avoid sudden acceleration before the first maintenance. After the first maintenance, you may consider doing a high-speed run. The break-in period for a new car typically ranges from 1,000 to 3,000 kilometers, during which it's advisable not to drive too fast—keeping the speed between 50-90 km/h is ideal. Warm up before starting: After starting the engine, you can begin driving as long as it maintains a stable idle. Before the engine reaches normal operating temperature, moderate your speed. Once the engine is warmed up, you can drive normally. During the break-in period, avoid hard acceleration and sudden braking. Avoid high-speed driving: New cars have speed limits during the initial driving phase. For domestic cars, the limit is usually between 40-70 km/h; for imported cars, it's generally within the first 1,000 kilometers, with the speed not exceeding 80% of the maximum speed at full throttle. It's also important to monitor the engine RPM and speed gauges to ensure both are operating within moderate ranges.
4
3
Share

What can be used to remove adhesive from car wraps?

You can use a hairdryer, wet towel, and carburetor cleaner to remove adhesive from car wraps. Using a hairdryer: Blow the hairdryer hard until it becomes hot to the touch, then immediately apply even force to peel off the car wrap. The remaining adhesive can be sprayed with tar remover, left for a while, and then wiped clean with a wet cloth. It's very easy. Wet towel: First, use a wet towel to moisten and soften the paper on the car wrap, then rub it off. For the remaining adhesive, apply essential balm, alcohol, or hand cream, and it will come off with a wipe. This is very effective for adhesive marks. Carburetor cleaner: For glass that already has a film, never use regular cleaners as some chemical agents may damage the film. In this case, use a towel dipped in a small amount of carburetor cleaner (such as alcohol or diesel) to repeatedly wipe the area with the adhesive, but never spray the carburetor cleaner directly on the glass, as it could damage the film. It's important to note that these are all flammable items, so be cautious of open flames during use.
17
2
Share

Which Generation Transmission is Used in the Verano?

Below are the transmission models for the Verano:1. The Buick Verano 20T model is equipped with the eighth-generation Ecotec series 1.3T direct-injection turbocharged engine and a new CVT intelligent continuously variable transmission; 2. The 15T model is equipped with the eighth-generation Ecotec series 1.0T direct-injection turbocharged engine and a 6-speed DSS intelligent transmission. More details about the Verano are as follows:1. The Verano is an A+ level product launched by the Buick brand for the compact family sedan market. Since its launch, it has gained the favor and preference of many consumers due to its youthful positioning and cost-effective configuration options.2. The mid-cycle facelift of the Buick Verano was officially launched in September last year, with a total of 4 models introduced, featuring the latest family design language and 1.0T and 1.3T engines that meet the China VI emission standards.3. The Buick Verano is equipped with a new generation power combination of a 1.3T direct-injection turbocharged engine and a CVT intelligent continuously variable transmission, offering quick response and smooth acceleration. Paired with a high-performance sports chassis, the power and handling are perfectly matched. The 20T model is equipped with the eighth-generation Ecotec series 1.3T direct-injection turbocharged engine and a new CVT intelligent continuously variable transmission, delivering a maximum power of 121kW/5600rpm and a maximum torque of 240N·m/1500-4000rpm. Faster, stronger, and smoother, the driving experience is completely revolutionized.4. The 15T model is equipped with the eighth-generation Ecotec series 1.0T direct-injection turbocharged engine and a 6-speed DSS intelligent transmission, delivering a maximum power of 92kW/5800rpm and a maximum torque of 180N·m/1350-4500rpm. More efficient and lighter, it brings a breakthrough new-generation small-displacement driving experience.
13
3
Share

How to Remove and Replace the Bulb on a Haval H6?

Haval h6 bulb replacement method is: 1. Open the hood and locate the position of the low beam light; 2. Rotate and remove the lamp cover, the retaining spring needs to be released; 3. Press both ends of the retaining spring respectively to pop it out; 4. Push the retaining spring aside to remove the bulb; 5. Replace with a new bulb. Taking the Haval H6 2021 3rd Generation 2.0T Automatic Two-Wheel Drive Max as an example: The Haval H6 has a length, width, and height of 4653mm, 1886mm, and 1730mm respectively, with a wheelbase of 2738mm and a curb weight of 1590kg. This model is equipped with a 2.0T inline four-cylinder engine, delivering a maximum horsepower of 211ps and a maximum power of 155kw, paired with a 7-speed dual-clutch transmission.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.