What is the 0-100 km/h acceleration time of the 2020 Peugeot 508L?

1 Answers
JoannaFitz
07/30/25 10:08am
2020 Peugeot 508L achieves a 0-100 km/h acceleration in 5 seconds. Below is an introduction to the Peugeot chassis-related content: 1. Smoothness: The Peugeot performs well under medium and low-speed conditions. At 60 km/h, the front/rear seat measurements are 7.46h/4.19h; at 80 km/h, they are 7.46h/3.74h. As speed increases, the smoothness of the front seats does not diminish. However, at 100 km/h, with further speed increases, the smoothness of the Peugeot's front/rear seats begins to decline, but it still maintains a good performance. 2. Comfort: The damping effect of the Peugeot is closely related to its dual-stage damping design. Under high-frequency, small-amplitude vibrations, the damping is softer, absorbing a significant amount of vibration. When encountering low-frequency, large-amplitude vibrations on rough roads, the Peugeot employs a stiffer damping setting, which enhances the vehicle's support and stability.
Was this review help?
20
4
Share
More Forum Discussions

How to Brake Correctly While Driving?

The correct method of braking involves gently pressing the brake over a long distance; emergency braking; and braking when coming to a stop. Also known as deceleration, it refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other means of transport, or machinery. A wheel is fixed on the high-speed shaft of the machine, and brake shoes, bands, or discs compatible with it are installed on the machine base, generating a braking torque under external force.
4
2
Share

What to Do When the Engine Exhaust System Warning Light Comes On?

The illumination of the engine exhaust system warning light is mostly caused by poor fuel quality in the domestic market, damage to the oxygen sensor in the three-way catalytic system, or poisoning of the three-way catalytic converter. If this light comes on while driving, immediately reduce speed and proceed to the nearest service station for inspection and repair. Relevant information about the three-way catalytic converter is as follows: 1. The three-way catalytic converter is the most important external purification device installed in the vehicle's exhaust system. It converts harmful gases such as CO (carbon monoxide), HC (hydrocarbons), and NOx (nitrogen oxides) emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. 2. Since this catalytic converter can simultaneously convert the three main harmful substances in exhaust gases into harmless substances, it is called a three-way catalytic converter.
1
0
Share

What to Do If a Small Amount of Paint Chips Off a Car?

For metal sheet areas, you can purchase a touch-up paint pen to apply color, which helps prevent rust from spreading and worsening. If the damage is on the front or rear bumper, you can leave it as is. If you notice the issue when picking up the car, you can negotiate with the 4S dealership for a solution. Below is relevant information: 1. Automotive paint generally consists of four basic components: film-forming substances (resins), pigments (including extender pigments), solvents, and additives. 2. The film-forming substance is the main component of paint, serving to keep the pigment bright, durable, and firmly adhered to the surface. It determines the type of paint. Typically, it is made from natural resins (such as rosin) modified with drying or semi-drying oils, synthetic resins (such as maleic resin), or polymer resins (such as methyl methacrylate, polyurethane, polystyrene, polyvinyl chloride, etc.). 3. Durability, adhesion, corrosion resistance, abrasion resistance, and toughness are usually adjusted and improved by adding plasticizers and catalysts. Pigments are one of the two non-volatile substances in paint, providing color and durability while giving the paint opacity, enhancing strength and adhesion, altering gloss, and improving flow and application properties. 4. Solvents are the volatile components in paint, primarily serving to fully dissolve the resin in the paint film, enabling proper application. Additives include curing agents that speed up drying and enhance gloss, retarders that slow drying, and matting agents that reduce shine. Some additives serve multiple purposes, such as reducing wrinkles, accelerating drying, preventing whitening, and improving resistance to chemicals.
6
0
Share

How to Check if It Meets China 6 Emission Standard?

There are several methods to check whether a vehicle meets China 6 emission standard: 1. Vehicle Conformity Certificate: When purchasing a car, be sure to request relevant documentation from the salesperson. The Vehicle Conformity Certificate clearly states the vehicle's emission standard. Although it may not explicitly mention "China 6," the specified emission standard allows for clear determination of compliance. 2. Environmental Information Vehicle List: As the name suggests, this document details the vehicle's environmental impact, including its exhaust emission standard. It directly displays the vehicle's emission phase, enabling straightforward identification of whether it meets China 6 standards. 3. Vehicle Qualification Certificate: As automobiles are major consumer goods, they come with a Vehicle Qualification Certificate that clearly indicates the emission standard. Note that this certificate is typically archived during vehicle registration. It's advisable to take a photo or make a copy before completing registration procedures.
15
1
Share

What Causes a Car to Occasionally Fail to Start?

There are several reasons why a car may occasionally fail to start: 1. Low temperatures, which typically occur in winter. In such conditions, the viscosity of the car's engine oil decreases, causing it to flow more slowly, thereby increasing the engine's resistance and making it harder to start the car. 2. Faulty spark plugs, which are critical components of the car's ignition system. If the spark plugs malfunction, the air-fuel mixture won't ignite, and the car's engine won't operate. 3. Insufficient fuel. In this case, simply refueling the car will solve the problem. 4. A weak or discharged battery. When this happens, you may notice that the starter struggles to turn the engine, and the first attempt to start the car feels stronger than subsequent attempts. 5. Incorrect gear position. Generally, automatic transmission cars can only be started when in the P (Park) position. If the gear is left in R (Reverse) or D (Drive), the car won't start.
1
5
Share

What to Do When Feeling Drowsy While Driving?

Find a place to park and take a short nap. When feeling drowsy while driving, the most effective method is to find a safe place to park, then close your eyes and take a brief rest. Roll down the windows and let in a strong breeze, which can also help refresh you. The reason is that breathing fresh air from outside the car can naturally help wake you up to some extent. Slap your face, apply ice, or wash your face with cold water. When feeling drowsy in daily life, many people have the habit of slapping their own face.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.