···
Log in / Register

What is the 0-100 km/h acceleration time of the 2.5G Camry?

3 Answers
VonBraxton
08/29/25 7:29am
The 0-100 km/h acceleration time of the Camry 2.5G is 8.68 seconds. Although there is a slight tendency for wheelspin at the start, the entire acceleration process is relatively smooth, and even during gear shifts, no noticeable jerking occurs. Impact of Engine Displacement: The 0-100 km/h acceleration time is primarily influenced by engine displacement, followed by factors such as the transmission: shorter shift times can reduce acceleration time, which is one of the differences between professional racers and average drivers. This is also why DSG transmissions claim to match or even surpass the performance of professional racers. Impact of Vehicle Weight: Generally, a larger engine displacement provides more power and higher speeds. Conversely, a lighter vehicle can also improve 0-100 km/h acceleration to some extent, which is why many automakers are now adopting vehicle lightweighting techniques.
Was this review help?
14
3
Share
AlainaRose
09/11/25 5:02am
I enjoy tinkering with cars in my spare time and am particularly sensitive to vehicle performance data. The Camry 2.5G model has a 0-100 km/h acceleration time roughly in the range of 8 to 9 seconds, more precisely around 8.5 seconds. It uses a naturally aspirated engine, which delivers power smoothly, unlike turbocharged engines that surge forward when you step on the gas. Although the acceleration is a bit slower, it's quite suitable for daily commuting—after all, it's not a race car and doesn't need to be too aggressive. I drove one for a while, and its response at traffic lights was steady, not heart-stopping, making long drives less tiring. On slippery roads, this steadiness actually enhances safety. I'd advise against chasing speed; practicality and reliability are more crucial. Overall, its performance is solid, making it a perfect family car.
Was this review help?
15
2
Share
Expand All
Walker
10/25/25 5:53am
As a seasoned commuter driver, I feel the acceleration of the Camry 2.5G isn't particularly fast, taking a little over 8 seconds to go from 0 to 100. It drives very steadily, and its performance is completely adequate for city driving, never feeling sluggish at traffic lights. Compared to those high-end cars with overly aggressive acceleration, this actually makes it safer, especially during rush hour when it reduces the risk of rear-end collisions. The fuel consumption is reasonable, and the engine runs smoothly—I've driven it for several years without any issues. In summary, it doesn't chase speed, but reliability and smoothness are its highlights, making it well-suited for everyday driving by regular people like us.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

How long should you wait to wash a motorcycle?

It is recommended to wait at least half an hour after turning off the engine before washing the motorcycle. Avoid washing immediately after shutting off the engine, and never spray high-pressure water directly at the engine during washing, as this can cause rapid thermal expansion and contraction of the engine, potentially compromising its sealing performance. Avoid having others wash your motorcycle: Unless absolutely necessary, avoid taking your motorcycle to a car wash or having others wash it for you. While car washes may appear to have complete tools and standardized procedures, their focus on efficiency often leads to subpar results. Improper washing may even cause issues with components like the spark plug and various wiring. Thoroughly clean the lower part of the engine: When washing, make sure to clean the lower part of the engine and the cooling fins thoroughly. Using a toothbrush dipped in detergent is recommended, as this not only enhances appearance but also makes it easier to detect issues like engine oil leaks. Dry the motorcycle body completely: After washing, use a dry cloth to wipe the entire motorcycle dry, paying special attention to areas such as the ignition switch, dashboard, left and right handlebars, spark plug, and fuel tank cap. It is particularly important to remove the spark plug cap and shake it a few times to remove any water trapped in the sleeve, as this could otherwise affect ignition.
8
2
Share

Is it normal for water to leak from the middle of a car's exhaust pipe?

It is normal for water to leak from the middle of a car's exhaust pipe. This leakage is not caused by damage to internal components but rather by water vapor produced during gasoline combustion. This vapor accumulates in the exhaust pipe and, when the car is started again, condenses into water droplets that flow out. Another possible cause is coolant from the engine leaking into the combustion chamber, leading to exhaust pipe leakage. In such cases, it is important to check the cooling system in the engine compartment for faults and repair them promptly if found. The exhaust pipe serves as a device to reduce vibration and noise, facilitate installation, and extend the life of the exhaust muffler system. It is installed between the engine exhaust manifold and the muffler, providing flexible connectivity for the entire exhaust system.
17
2
Share

What is the speed limit on the Shangnan Expressway?

The speed limit on the Shangnan Expressway is 120 km/h. The Shangnan Expressway project starts from the Ningluo Expressway, connecting to the Shangqiu-Zhoukou section of the Shangnan Expressway, and runs southwest through Shangcai, Suiping, Xiping, Wugang, and Fangcheng, ending at Sheqi where it connects with the Lannan Expressway. It links the four cities of Zhoukou, Zhumadian, Pingdingshan, and Nanyang, with a total route length of 190 kilometers, built according to the standard of a four-lane expressway in both directions. Expressway speed limit values: The speed limit on expressways must not exceed 120 km/h, and the speed limit value should be a multiple of 10 km/h. The difference in speed limit values between two adjacent speed limit sections should not exceed 20 km/h. The speed limit signs set on the mainline of highway interchanges, deceleration lanes, and exit ramps should not differ by more than 30 km/h. Speed limit sign design: The design of speed limit signs should be more concise, clear, and aesthetically pleasing. Speed limit signs should be placed at the starting point of the speed limit section and must not be obscured by roadside trees, structures along the route, or other traffic signs. They should be repeated as necessary.
1
3
Share

Where to Repair a Faulty ETC Device in Another City?

If your ETC device is damaged in another city, you can only have it repaired at the location where you originally applied for the ETC service. When the ETC device malfunctions, the installation outlet needs to replace the device for the user, rebind the vehicle, and reactivate the new device. After these steps, the ETC can be used normally, and the entire process is typically completed within one business day. ETC Usage Precautions: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, maintain a distance of more than 10 meters to prevent automatic payment for the vehicle ahead in case its ETC device is faulty or absent. The speed limit for ETC lane recognition is 20 km/h. Driving too fast may result in failure to read the vehicle's device information and unsuccessful fee deduction. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, will render the tag invalid. You can take it to the bank where you applied for the ETC card or the highway service office for inspection. If the issue is not due to human interference, reactivation may suffice. When using a debit card linked to ETC, insufficient balance may cause fee deduction failure. Follow the guidance of on-site staff to use the manual MTC lane, where you can pay with cash or by card. A windshield that is too thick may lead to poor signal reception. This is particularly important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.
17
1
Share

What to Do When the Steering Wheel of Wuling Hongguang is Locked?

The solution to unlock the steering wheel of Wuling Hongguang: Insert the key into the ignition and turn the steering wheel to unlock; if the car has a push-button start, first press the brake, then turn the steering wheel left and right, and press the start button to start the car and unlock the steering wheel. Wuling Hongguang is a compact multi-purpose business vehicle launched by SAIC-GM. The car measures 4305 mm in length, 1680 mm in width, and 1750 mm in height, with a wheelbase of 2720 mm. In terms of appearance, the Wuling Hongguang features a popular double-U front face design and a three-dimensional vertical chrome grille, which not only makes the front look more stylish and dynamic but also inherits some characteristics of the GM series.
8
3
Share

What car has three diamond-shaped logos?

Three diamond-shaped logos represent Mitsubishi Motors, a Japanese multinational automobile manufacturer under the Mitsubishi Group. Mitsubishi's vehicle lineup includes the ASX, Eclipse Cross, and Outlander, with new energy vehicles like the GAC Mitsubishi Eupheme EV and GAC Mitsubishi Eupheme PHEV. Taking the Outlander as an example, this compact SUV measures 4705mm in length, 1810mm in width, and 1710mm in height, with a wheelbase of 2670mm. In terms of powertrain, the Outlander is equipped with two engines: a 2.0-liter naturally aspirated engine and a 2.4-liter naturally aspirated engine, both paired with a CVT transmission.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.