What is the 0-100 km/h acceleration time for the RS5?

2 Answers
OLeonardo
09/05/25 7:52am
rs5 accelerates from 0 to 100 km/h in 3.9 seconds. Here are some important considerations for driving: Reaction distance: The length of reaction distance depends on driving speed and reaction time. The higher the speed or the longer the reaction time, the greater the reaction distance. Reaction time is directly related to the driver's alertness and skill level, typically ranging from 0.75 to 1 second. For example, at a speed of 30 km/h with a reaction time of 1 second, the reaction distance would be 8.33 meters. Braking distance: The length of braking distance is influenced by driving speed, braking force (the force that resists and stops wheel rotation after the driver presses the brake pedal), and the coefficient of friction. The magnitude of braking force depends not only on how far the brake pedal is pressed but also on the coefficient of friction between the tires and the road surface. The smoother the road (e.g., icy conditions), the lower the coefficient of friction, resulting in a longer braking distance.
Was this review help?
5
5
Share
SarahLynn
09/17/25 8:04am
As a car performance enthusiast, I've been closely following the acceleration data of the Audi RS5. According to the latest model, its 0-100 km/h acceleration time is approximately 3.9 seconds, which is officially tested based on the standard 2.9-liter V6 biturbo engine. The engine delivers an explosive 450 horsepower, paired with an 8-speed dual-clutch transmission and quattro all-wheel drive system, creating an intense push-back sensation the moment you start. When I drove my friend's same model, with just a light tap on the accelerator, the car shot forward like an arrow, with virtually no delay in the entire 0-100 km/h process. In comparison, some sports cars like the BMW M4 take around 4.2 seconds, noticeably slower. Many factors affect acceleration, such as tire pressure and road conditions; on dry asphalt with good grip, it's easier to approach the 3.9-second mark, but slippery surfaces will slow the response. For daily driving, fast acceleration is an advantage, but I recommend that beginners first get accustomed to high-speed control to avoid loss of control from sudden braking. Regular maintenance of the engine and transmission is also crucial to ensure stable performance, as such high speeds consume significant fuel—around 12 liters per 100 km in city driving.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

How to Deal with Air Conditioner Water Corrosion on Cars?

Use toothpaste to clean the car body. Apply an appropriate amount of toothpaste to the water stains, then wipe with a soft towel. Repeat several times and rinse with water. Dishwashing liquid can also remove stubborn water stains. Apply an appropriate amount to the water stains, gently rub with fingers, wipe with a dishwashing sponge, rinse with water, and repeat several times. Go to an auto paint repair shop and use a fine abrasive polishing agent to polish the surface of the car body. After polishing, apply wax to prevent water stains from sticking.
17
0
Share

How to Identify Repainted Car Surfaces?

The original factory paint thickness typically ranges between 100~120 microns and is very uniform. If measurements exceed this range or show significant unevenness, it indicates repainted surfaces. Uniform light reflection across the entire vehicle body suggests either no repainting work has been done or the whole car has been repainted. Open the trunk lid and engine hood to examine the transition areas between visible and non-visible surfaces. Obvious layering or noticeable differences in paint aging indicate repainted sections.
14
3
Share

Why Car Wheels Won't Turn and How to Fix It

This phenomenon may occur during rainy days, after car washing, or when the vehicle has been parked for an extended period. Simply kick the sidewall of the tire a few times to resolve the issue. It could also be caused by rusted rear brake discs and pads sticking together. In this case, gently tap the brake assembly with a wooden stick to free them.
5
0
Share

How to Replace the Car Door Window Seal Strip?

To replace the window seal strip, you first need to remove the door panel. For some cars, the window control buttons must also be removed to take off the door panel. After the door panel is removed, the old seal strip can be taken off. Then, install the new seal strip and reattach the door panel.
11
0
Share

What are the differences between Dongfeng Honda and GAC Honda?

The differences between Dongfeng Honda and GAC Honda include: different joint ventures, different vehicle models for sale, and different scales. The detailed differences between Dongfeng Honda and GAC Honda are introduced as follows: 1. Different joint ventures: GAC Honda Automobile Co., Ltd. (formerly Guangzhou Honda Automobile Co., Ltd.; referred to as GAC Honda) was established on July 1, 1998, and is a joint venture jointly funded by Guangzhou Automobile Group Co., Ltd. and Honda Motor Co., Ltd. of Japan. Dongfeng Honda Automobile Co., Ltd. is a vehicle production and operation enterprise jointly established by Dongfeng Motor Group Co., Ltd. with a 50% investment, Honda Motor (China) Investment Co., Ltd. with a 10% investment, and Honda Motor Co., Ltd. of Japan with a 40% investment. 2. Different vehicle models for sale: The main products currently produced by GAC Honda include the Avancier series SUVs, Accord series sedans, Odyssey multi-purpose series sedans, Lingpai series sedans, City series sedans, Fit series sedans, and the independent brand Everus series sedans, totaling seven series with more than 30 models. Since its establishment, Dongfeng Honda has successively introduced Honda's sports utility vehicle CR-V (C-RV), mid-size car CIVIC (Civic), high-end sports sedan SPIRIOR (Spirior), independent brand model CIIMO (CIIMO), high-end MPV Elysion (Elysion), hybrid vehicle INSIGHT (Insight), and new concept sedan JADE (Jade). 3. Different scales: GAC Honda currently has two plants, the Huangpu Plant and the Zengcheng Plant, with a combined production capacity of 480,000 vehicles per year and a total area of 1.6 million square meters. Dongfeng Honda's first plant covers an area of 1.81 million square meters and has a research and development center and nine major production lines including stamping, welding, synthetic resin, painting, engine casting, machining, engine assembly, and vehicle assembly.
5
2
Share

How to Deal with Excessive Moisture Inside the Car?

Before driving, start the vehicle and turn on the air conditioning to blow cold air inside the car, removing as much fog and moisture as possible. You can choose to place desiccants or bamboo charcoal in areas prone to water accumulation, such as the interior and trunk of the car.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.