What is the 0-100 km/h acceleration time for the Ford Mustang?

2 Answers
Kirk
07/24/25 7:58pm
Ford Mustang 2.3T achieves 0-100 km/h in 5.5 seconds, while the 5.0L version completes it in 4.76 seconds. The Ford Mustang inherits the Mustang family's highly recognizable long hood, low roof, and short rear deck sporty posture, featuring classic design elements such as the aggressive shark-nose front fascia and triple-bar taillights. Below are relevant details about the Ford Mustang: 1. The Mustang is equipped with either a 2.3T or 5.0L engine. The 2.3T Ford Mustang delivers a maximum horsepower of 299 HP and peak torque of 434 N·m, paired with exclusive 19-inch alloy wheels and Pirelli performance tires that offer both formidable looks and exceptional grip. Additionally, it features a new four-wheel independent suspension system and upgraded braking for superior dynamic performance. 2. The Ford Mustang GT has a recalibrated 5.0-liter V8 engine producing 466 HP and 556 N·m of torque. It comes with a set of new Michelin Pilot Sport 4S tires and is mated to a 10-speed SelectShift automatic transmission.
Was this review help?
7
2
Share
VanPaisley
08/11/25 10:57am
I'm the type who really enjoys driving fast, and the feeling of driving a Ford Mustang GT is simply unmatched – it can go from 0 to 100 km/h in about 4.3 seconds! The sudden burst of acceleration pushes you back into your seat as the engine roars and quickly builds up speed, especially thrilling on straight roads. However, good acceleration isn’t just about engine power; strong tire grip is crucial, as they can easily slip in rainy conditions, so I’d recommend opting for all-season tires. A well-tuned transmission is also a plus, with the automatic version responding even faster. When driving around, avoid taking turns too sharply—being a rear-wheel-drive design, you need to be careful or you might fishtail. Regular maintenance like changing spark plugs and engine oil helps keep performance stable and the driving experience satisfying. Oh, and upgrading the exhaust system can shave off a bit of time, but the stock setup is already plenty powerful. Don’t forget to obey speed limits—safe driving is the coolest.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

How to Change the Transmission Fluid for the Sylphy?

Sylphy transmission fluid change steps: First, remove the oil drain plug at the bottom to drain the old fluid. After the old fluid is completely drained, clean the components inside the oil pan, replace the paper filter located on the side of the transmission, then refill with new fluid, and reinstall the oil pan. Below is an introduction to the Sylphy: 1. Overview: The Sylphy is a mid-sized car under Dongfeng Motor Co., Ltd., and is one of the most typical mainstream family sedans in the Chinese market. 2. Models: Includes models such as the Octavia PRO, Sagitar, Lavida, Corolla, and Bora. 3. Brand honors: In 2020, the Sylphy was selected for the "2020 Ward's 10 Best Interiors," alongside luxury cars like Audi and Bentley.
4
2
Share

What is the qualified light transmittance for car window films?

Car window films with a light transmittance of 70% or higher are considered qualified. These films are applied to the interior side of car windows, including the front windshield, rear windshield, side windows, and quarter windows. The steps for applying car window films are: 1. Place bath towels on the hood and dashboard; 2. Cover the seats with seat covers and secure them with cling film; 3. Thoroughly clean the glass; 4. Position the soft template over the window glass by sliding it into place, then cut the film according to the template. The functions of car window films include: 1. Blocking infrared heat to achieve heat insulation and sun protection; 2. Filtering out most UV rays to prevent skin damage and reduce aging of car interiors; 3. Preventing injuries to passengers from shattered glass in case of accidents; 4. Reducing the occurrence of accidents caused by glare.
2
1
Share

Where is the license plate 'Shaanxi S' from?

Shaanxi S is the license plate of the Shaanxi Military District. 'Shaan' represents Shaanxi Province, and the letter following 'Shaan' represents cities within Shaanxi Province. The license plate codes for other cities in Shaanxi Province are: Shaan B - Tongchuan City, Shaan C - Baoji City, Shaan D - Xianyang City, Shaan E - Weinan City, Shaan F - Hanzhong City, Shaan G - Ankang City, Shaan H - Shangluo City, Shaan J - Yan'an City, Shaan K - Yulin City, Shaan V - Yangling Agricultural Demonstration Zone. License plates are plates hung on the front and rear of vehicles, made of materials such as aluminum, sheet iron, plastic, or paper. License plates refer to vehicle registration plates, and their functions are: 1. To identify the region to which the vehicle belongs; 2. To trace the owner of the vehicle and its registration information based on the license plate.
9
2
Share

How Many Years is BMW's Warranty?

BMW offers different warranty periods for different series of models. The specific details are as follows: Examples: The official warranty period for the BMW M3 is 3 years or 100,000 kilometers, while the three-guarantee period for the entire vehicle is 2 years or 50,000 kilometers. The warranty period for the BMW 3 Series is 3 years, and the three-guarantee validity for the BMW X5 is 2 years or 50,000 kilometers, etc. Car Maintenance Tips: Body maintenance: Generally, it is also necessary to perform a series of maintenance on the car's body. Since the car's body is exposed to the air for long periods, it undergoes sun exposure, wind, and rain, which can cause some damage to the paint. Therefore, body maintenance should also be included during maintenance. Avoid excessive waxing: Some waxes contain alkaline substances, which can cause the car's surface to turn black over time and affect the body. Proper amount of antifreeze: When adding antifreeze to the car, do not fill it too much. The maximum level should be up to the top of the scale line.
17
1
Share

How to Cool Down a Car Exposed to Sunlight in Summer?

Methods to cool down a car exposed to sunlight in summer: 1. Open the doors for ventilation: After a car is exposed to sunlight in summer, it's best to first open the doors to allow air circulation, which helps the car gradually cool down. Once the interior is less stuffy, close the doors and turn on the air conditioning. It's also advisable to use a heat-insulating pad on the seats to avoid excessive heat. 2. Apply car glaze: To reduce the heat caused by UV rays, car manufacturers have developed a high-molecular UV-reflective paint care agent. Applying a layer of this agent on the car's surface in summer can help prevent the body from overheating and minimize UV damage. 3. Clean the radiator: When washing the car, remember to clean the radiator, as it tends to accumulate various impurities that hinder engine cooling. Cleaning the radiator is one way to help cool down the car. 4. Install a sunshade: Summer sunlight can heat up the car's interior. A sunshade can reflect sunlight and prevent direct exposure. Sunshades are typically placed on the front and rear windows. Using a sunshade can significantly lower the temperature of the seats and dashboard, making it an effective cooling method. 5. Park with windows slightly open: In summer, if a car is parked with all windows closed, the interior can become hotter than the outside temperature. To prevent this, leave a small gap (about the width of a finger) when parking to allow air circulation between the inside and outside, thereby reducing the interior temperature. Be cautious not to leave too large a gap to avoid theft of valuables. 6. Park in the shade: The primary reason a car gets hot is direct sunlight exposure. Whenever possible, park the car in a professional underground garage, under a tree, or in any other shaded area. This is the most effective way to prevent the car from overheating.
6
5
Share

How to Open the Trunk of Toyota Prado?

Toyota Prado trunk opening methods: Pull up the trunk switch located at the lower left corner of the driver's cabin or use the car key to open the trunk. Below is an introduction about Toyota Prado: 1. Overview: The Toyota Prado off-road vehicle is the latest model in the Toyota Land Cruiser (Land-Cruiser-Prado) series. This newly developed next-generation off-road vehicle is equipped with a newly developed Toyota six-cylinder electronic fuel injection 1GR-FEV6 engine, with a displacement of 3956cc, excellent power performance, and exhaust emissions that comply with the latest European Ш standard, making it highly environmentally friendly. 2. Models: Toyota Prado vehicle models include the 4.0L-V6-TX 2010 model, 4.0L-V6-TX-L 2010 model, 4.0L-V6-VX 2010 model, etc.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.