What is the 0-100 km/h acceleration time for the Elantra 1.4T?

Does the Toyota C-HR have heated mirrors?

Toyota C-HR only has some models equipped with heated mirrors. The heated mirror function refers to when the car is driving in rainy, snowy, or foggy weather, the outer rearview mirrors can be heated through the heating wires embedded behind the mirrors to ensure the mirror surface remains clear. The Toyota C-HR is positioned as a compact SUV, with a length of 4405mm, a width of 1795mm, a height of 1565mm, and a wheelbase of 2640mm. In terms of power, the car is all equipped with a 2.0-liter inline 4-cylinder naturally aspirated engine, paired with a CVT continuously variable transmission, delivering a maximum power of 126KW, a maximum horsepower of 171PS, and a maximum torque of 203Nm. The fuel supply method is all hybrid injection, and the driving method is all front-wheel drive. In terms of suspension, the front suspension is a MacPherson independent suspension, and the rear suspension is a double-wishbone independent suspension.

12

1

Share

Is 7 liters per 100 kilometers considered high fuel consumption?

Not considered high fuel consumption. Generally, cars consume between 6 to 8 liters. Below is relevant information about vehicle fuel consumption: 1. Introduction: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when traveling a hundred kilometers at a certain speed on the road, serving as a theoretical indicator for the vehicle. The fuel consumption per 100 kilometers is a value measured by manufacturers in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated under specified speed conditions to determine the theoretical experimental fuel consumption data per 100 kilometers for the model. 2. Relationship between fuel consumption and displacement: Although fuel consumption is related to displacement, this relationship is not absolute. A larger cylinder volume can accommodate more combustible mixture (air-fuel), so under all other conditions being equal, an engine with a larger cylinder volume (displacement) will inevitably have better/higher power/fuel consumption.

16

4

Share

Which parts are generally damaged in a statically flooded vehicle?

Strictly speaking, it causes damage to all components of the vehicle. Among them, the biggest issue with flooded vehicles is the electrical circuits; water submersion causes significant damage to electronic components. The mixed rainwater is highly corrosive and will affect the future functionality of electrical systems. The computer integrated circuits can oxidize due to soaking, often requiring inspection and replacement; otherwise, the vehicle cannot operate normally. Additionally, the engine, transmission, ABS, airbags, and onboard computers can short-circuit and get damaged after being submerged in water. To fully restore a flooded vehicle and repair it completely without replacing the original components carries relatively high risks. Generally, after restoration, flooded vehicles are highly likely to develop moldy odors or lose certain functionalities. In severe cases, issues like vehicle self-ignition, damage to the engine, transmission, or airbags may occur. Even if all necessary repairs and replacements are done during the repair process—replacing or repairing all water-damaged parts based on specific conditions, thoroughly drying and rust-proofing electrical system connectors and plugs, inspecting all vehicle fluids, replacing interior components, and thorough cleaning—there is still a risk of subsequent damage.

8

5

Share

Where is the coolant drain port on the Trumpchi GS4?

The coolant drain port on the Trumpchi GS8 is located at the bottom of the radiator. Find a plastic knob and unscrew it to drain the coolant. The radiator is positioned at the front of the engine, near the bumper. Precautions for draining coolant: Ensure the engine and radiator are cold. Place a large basin beneath the radiator drain plug, carefully open the plug, and drain the coolant into the basin. Carefully pour the coolant into a sealed container for disposal. It is recommended to use the original Trumpchi GS4 coolant, as coolants from different manufacturers may have different chemical compositions, which could lead to chemical reactions that corrode pipes or cause coolant leaks or blockages. Never open the coolant vent cap when the engine is hot or has just been turned off, to avoid scalding from hot coolant. In extremely cold weather, if you need to enhance the antifreeze capability, you can appropriately increase the proportion of antifreeze additive. However, the concentration of antifreeze should not exceed 65%, as this could reduce its antifreeze capability and weaken the cooling effect. The drain screw is located beneath the radiator fan—take care when draining the coolant.

20

3

Share

What is the appropriate tire pressure for the CT5?

The normal tire pressure range for the CT5 is 2.4-2.5 bar. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: Should not exceed 3.5 bar. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Causes excessive stretching deformation of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, and impacts can cause internal cracks or blowouts, leading to tire failure.

16

2

Share

Why Do Beginners Frequently Stall at Traffic Lights?

Beginners frequently stall at traffic lights due to reasons such as not pressing the accelerator when starting, releasing the clutch too quickly, prolonged acceleration while pressing the accelerator, and improper coordination between the accelerator and clutch. Not pressing the accelerator when starting: If the accelerator is not pressed when starting, the vehicle may fail to start due to insufficient idle speed. Therefore, it is necessary to press the accelerator appropriately when starting. Releasing the clutch too quickly: When starting, slowly release the clutch pedal with your left foot until the vehicle begins to vibrate, then hold it in that position. Check if the vehicle has a tendency and power to move forward, and do not continue to lift the clutch pedal to prevent stalling. Once the vehicle starts moving forward, release the handbrake completely with your right hand and gently press the accelerator. Prolonged acceleration while pressing the accelerator: During the starting process, avoid prolonged acceleration while the clutch is in a semi-engaged state. As long as the vehicle is propelled by the accelerator, it will not roll backward, and you can release the clutch pedal and press the accelerator to start. Improper coordination between the accelerator and clutch: When starting, press the accelerator first and then the clutch; when braking, press the brake first and then the clutch.

16

2

Share

What is the 0-100 km/h acceleration time for the Elantra 1.4T?

Does the Toyota C-HR have heated mirrors?

Is 7 liters per 100 kilometers considered high fuel consumption?

Which parts are generally damaged in a statically flooded vehicle?

Where is the coolant drain port on the Trumpchi GS4?

What is the appropriate tire pressure for the CT5?

Why Do Beginners Frequently Stall at Traffic Lights?

Is the Toyota Highlander a two-wheel drive or four-wheel drive vehicle?

Which seven-seater models does Dongfeng Nissan offer?

How much over the speed limit is driving 80 in a 70 zone?

What is the Toyota SRS?