What is the 0-100 km/h acceleration time for the BMW 525?

2 Answers
LaJames
07/24/25 2:05pm
BMW 525's 0-100 km/h acceleration time is 8.6 seconds, featuring a front-engine, front-wheel-drive layout. The BMW 525 is a mid-to-large-sized sedan with body dimensions of 5047mm in length, 1860mm in width, and 1491mm in height, with a wheelbase of 3108mm. In terms of powertrain, the BMW 525 is equipped with a turbocharged engine delivering an output power of 135 kW, operating within a rev range of 5000 to 6500 rpm, and achieving a top speed of 230 km/h. For suspension, the BMW 525 utilizes a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
5
4
Share
ElijahLynn
08/11/25 8:01am
I remember the BMW 525's official 0-100 km/h acceleration time is around 7.8 seconds, which is related to its 2.0-liter turbocharged engine producing 184 horsepower and 290 Nm of torque, paired with an 8-speed automatic transmission. The acceleration feels quite smooth. The weight factor can't be ignored—the car weighs about 1.6 tons, so it doesn't launch as aggressively as a sports car, but it's definitely sufficient for overtaking in the city. Engine tuning affects acceleration response, and maintaining regular transmission fluid and tire upkeep can preserve optimal performance. I think the acceleration figures are quite realistic; it allows for stable merging into highway traffic, making it safe and worry-free. Don't worry about a sudden spike in fuel consumption—the combined fuel economy stays under 9 liters per 100 km. In real-world driving, maintaining proper tire pressure and clean air filters can make acceleration feel more responsive. This car is designed to balance family needs, and its moderate acceleration is one of its strengths.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

Can You Still Drive If the Car's Water Temperature Gauge Stops Moving?

If the water temperature gauge stops moving, the car can still run for a short period, but prolonged driving in this condition may damage the vehicle. Here are several reasons why a car's water temperature gauge may indicate overheating: 1. Insufficient Coolant: Leakage or reduction of coolant can cause the water temperature to rise. In such cases, check for any signs of coolant leakage. If found, repair the leaking component as soon as possible; if not, promptly add the appropriate coolant. 2. Radiator Fan Malfunction: When the vehicle is running at high speeds, the generated heat cannot be effectively transferred to the antifreeze, affecting heat dissipation and causing the antifreeze temperature to rise. In such situations, reduce the speed while driving and check if the fan is malfunctioning. If it is, repair it as soon as possible.
9
2
Share

How to Save Fuel When Driving an Automatic Car?

Mastering the correct driving techniques can save a significant amount of fuel. Below are some fuel-saving methods: 1. Proper maintenance of older cars: Older cars generally consume more fuel than new ones due to aging components and the inability to maintain optimal performance. Regular maintenance can slow down the aging process of car parts, keeping the vehicle in its best condition, which naturally leads to long-term fuel savings. 2. Aggressive driving is a major factor that increases fuel consumption. Less flooring the accelerator, less sudden braking, less aggressive throttle use, and less use of sport mode (S mode), combined with a more relaxed and smooth driving style, will naturally reduce fuel consumption. Developing good driving habits is essential for saving fuel. 3. The use of car air conditioning also significantly impacts fuel consumption. In hot weather, first open the windows to allow air circulation and quickly bring the interior temperature down to ambient levels before turning on the air conditioning. Start with the external circulation mode and switch to internal circulation once the car's temperature has dropped.
4
4
Share

Can You Still Drive After Adding Coolant to Engine Oil?

Adding coolant to engine oil means the car should not be driven further. Below are the specific reasons: 1. Coolant entering the engine oil: When the engine oil contains a significant amount of water, its lubricating properties deteriorate, and its viscosity decreases. In mild cases, this can lead to premature oil degradation and rusting of components. In severe cases, it may cause serious mechanical failures such as engine seizure or bearing damage. 2. Engine oil entering the coolant: If the engine oil in the coolant is not addressed promptly, it can lead to continuous overheating of the engine during operation. Carbon deposits may accumulate around the cylinder liner in the water jacket, obstructing the cooling system's circulation. If this results in engine damage, a major overhaul will be necessary.
5
3
Share

What is the ground clearance of the Honda Lingpai in centimeters?

The ground clearance of the Honda Lingpai is 14.4 cm when fully loaded and 16.5 cm when unloaded. The Lingpai features a front MacPherson independent suspension and a rear torsion beam semi-independent suspension combination. Its structural layout is similar to that of the Honda City, with a plastic-covered floor pan and well-executed oil line maintenance. Below are more details about the Honda Lingpai: 1. The front MacPherson suspension structure uses a forged steel lower control arm and a cast iron bearing housing, arranged compactly. The body is reinforced with strengthening components, and the front suspension subframe is an H-shaped steel subframe, with an iron engine underguard for protection. The front suspension lower control arm connects to the subframe via hydraulic bushings and to the bearing housing via rubber bushings. This non-bolt rigid connection method enhances ride comfort. 2. The rear suspension is a torsion beam semi-independent suspension, with both the torsion bar and spring base made of forged steel. The Lingpai's rear suspension lacks a subframe; the torsion bar connects to the body via rubber bushings, which help filter road vibrations compared to rigid bolt connections. The front wheel arches are protected by plastic panels and coatings, with the plastic panels reducing noise from gravel and the coatings providing waterproofing and rust prevention.
1
2
Share

Will Water Enter the Engine When Washing the Car?

Water will not enter the engine when washing the car. Here are the relevant reasons: 1. The car's exhaust pipe is very long, almost as long as the car body. From the engine exhaust valve to the exhaust outlet, there is a three-way catalytic converter and two mufflers in between, both of which have winding pipes inside, making it difficult for water to pass through. Additionally, the height of the engine exhaust valve is much higher than that of the exhaust outlet. As long as the water level does not exceed the exhaust valve, water will not enter. Moreover, when the engine is running, the pressure inside the exhaust pipe is very high, and any water deposited inside will be blown out under this pressure. 2. Generally, as long as the car is not completely submerged in water, water will not enter the engine through the exhaust pipe. Even if the car drives through water during the rainy season and the exhaust pipe is fully submerged, water will not enter the engine.
2
5
Share

Which Direction Should the Ceramic Tube of Xenon Headlights Face?

When installing the ceramic tube of xenon headlights, it should face directly downward. Here is more information about xenon headlights: 1. Xenon headlights are high-pressure gas discharge lamps filled with a mixture of inert gases, including xenon, and do not have the filament found in halogen lamps. They are also known as HID (High-Intensity Discharge) xenon headlights or metal halide lamps and are categorized into automotive xenon headlights and outdoor lighting xenon headlights. 2. In the automotive lighting field, xenon headlights are also referred to as HID gas discharge headlights. They replace traditional tungsten filaments with high-pressure xenon gas enclosed in quartz tubes, providing higher color temperature and more focused illumination. Xenon lamps generate an arc of light by activating xenon gas with high-voltage current, which continuously discharges and emits light between two electrodes. While standard automotive tungsten filament bulbs require 55 watts, xenon lamps only need 35 watts, reducing power consumption by nearly half. This significantly alleviates the load on the vehicle's electrical system. 3. The color temperature of automotive xenon headlights ranges between 4000K and 6000K, which is much higher than that of conventional headlight bulbs. They offer high brightness; for example, a 4300K xenon headlight emits a white light with a slight yellow tint. Due to the lower color temperature, the light appears more yellow, but it has superior penetration compared to higher color temperature lights, enhancing driving safety during nighttime and foggy conditions.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.