What is the 0-100 km/h acceleration time for the Bin Yue 1.4t?

1 Answers
LaJudah
07/29/25 4:02pm
According to official data, the Bin Yue 1.4t model achieves a 0-100 km/h acceleration time of 7.9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. For example, the Haval M6 has a maximum torque of 210 Nm and a 0-100 km/h acceleration time of 12.96 seconds, while the Bin Yue 1.4t has a maximum torque of 235 Nm and accelerates from 0-100 km/h in 7.9 seconds. Transmission efficiency: The transmission acts as a medium for transferring power, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission (MT) > dry dual-clutch transmission > wet dual-clutch transmission > automatic transmission (AT) > continuously variable transmission (CVT). The Bin Yue 1.4t is equipped with a 6-speed manual transmission (MT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the Haval M6 has a power-to-weight ratio of 100 Hp/T and a 0-100 km/h acceleration time of 12.96 seconds, while the Bin Yue 1.4t has a power-to-weight ratio of 108 Hp/T and accelerates from 0-100 km/h in 7.9 seconds.
Was this review help?
16
4
Share
More Forum Discussions

How many points will be deducted for a motor vehicle failing to yield to a school bus as required?

Motor vehicles that fail to yield to a school bus as required will be deducted 6 points. Below is the relevant legal information: 1. Road traffic safety violations: According to the Road Traffic Safety Violation Scoring System (Item 14), driving a motor vehicle without yielding to a school bus as required will result in a deduction of 6 points. 2. School Bus Safety Management Regulations: Article 33 of the School Bus Safety Management Regulations stipulates that when a school bus stops on the road to pick up or drop off students, it must park on the right side of the road, activate the hazard warning lights, and display the stop sign. When a school bus stops on a road with only one lane in the same direction, vehicles behind must stop and wait, and are not allowed to overtake. When a school bus stops on a road with two or more lanes in the same direction, vehicles in the lane behind the school bus and in adjacent lanes must stop and wait, while vehicles in other lanes should slow down and pass. Vehicles waiting behind the school bus must not honk or use lights to urge the school bus. School buses have special status and absolute priority.
5
2
Share

What is the FORO car?

FORO is the Ford F-150, also known as the Raptor in China. It is a four-door, five-seat pickup truck produced by Ford Motor Company. Below are some details about the Ford F-150: 1. **Powertrain**: The Ford F-150 is equipped with a 3.5-liter V6 twin-turbocharged engine, available in two versions: low power and high power. The low-power version delivers a maximum horsepower of 380 HP, a maximum power output of 280 kW, and a maximum torque of 672 N·m. The high-power version offers a maximum horsepower of 422 HP, a maximum power output of 310 kW, and a maximum torque of 678 N·m. 2. **Dimensions**: The Ford F-150 is notably large, with dimensions measuring 5910*2192*1992 mm. 3. **Drivetrain**: The Ford F-150 comes standard with a four-wheel-drive system across all models.
13
4
Share

How long does it take to take the driving test for Subject 2?

Subject 2 requires 2 hours of theoretical training and 22 hours of practical training before taking the test. The following are precautions for Subject 2: 1. Reverse Parking: The main points for deduction in reverse parking include running over the line, failing to enter the parking space, exceeding the time limit, and not following the designated route. After the new regulations, a time limit of 210 seconds was added for reverse parking. Exceeding this time will result in failure. During the test, you must first reverse into the right parking space, then the left one. Not following this order will also result in failure. Pay attention to the 30cm margin when reversing. 2. Parallel Parking: The main points for deduction in parallel parking include the turn signal, the 30cm margin, and running over the line. When entering the test area, turn right in advance and align the highest point of the windshield wiper with the roadside line to adjust the 30cm margin. During the reverse, remember the first right full turn, straightening, left full turn, parking in the space, turning on the left turn signal, and observing the rearview mirror when exiting to prevent the wheels from running over the line. 3. Right-Angle Turn: The main points for deduction in the right-angle turn are the turn signal and running over the line. After entering the test area, turn on the turn signal and turn it off after the voice prompt. Incorrect operation of the turn signal will deduct 10 points. After entering the right-angle turn, adjust the 30cm margin between the car body and the line. The reference point is the same as in parallel parking. When making the full turn, slightly release the clutch to prevent stopping or stalling. Straighten the car body after the rear wheels exit to prevent running over the line.
15
1
Share

Should Hazard Lights Be Turned On When Pulling Over to Wait for Someone?

When pulling over to wait for someone, it is necessary to turn on the hazard lights. Here are some precautions regarding the use of hazard lights: 1. Driving in foggy conditions: Due to poor visibility in foggy weather, not only should the hazard lights be turned on, but the fog lights should also be activated to alert passing vehicles. 2. Vehicle malfunction or accident: Hazard lights should be turned on to warn other vehicles of potential danger. On highways, failure to use lights and set up warning signs as required after a vehicle breakdown or accident can result in a 12-point penalty. 3. Towing a malfunctioning vehicle: Both the towing vehicle and the towed vehicle should turn on the hazard warning lights to indicate an abnormal state to passing vehicles. 4. Temporary parking: Turn on the hazard lights to alert other vehicles.
1
3
Share

How to eliminate the ABS light?

ABS elimination methods can be addressed based on the following scenarios: constant illumination of the warning light, intermittent illumination, extinguishing with engine operation, or illumination during driving: If the ABS warning light is constantly on, clean the dirt on the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal operation. Check the wiring connections and reconnect any loose parts. If the ABS warning light intermittently illuminates and extinguishes during acceleration, check the battery specific gravity; inspect the charging system; and examine the power supply (such as voltage relays or poor power contacts). If the ABS warning light remains on after engine start until the engine is turned off (IGFF), loosen the grounding screw of the hydraulic valve body, then retighten the fixing screw and clean the contact surface if necessary; check if the connector gap has increased; replace the ABS or ABS/ASR computer. If the ABS warning light illuminates during high-speed driving, start the engine, press the brake pedal, use a finger to push the brake switch linkage all the way down, then release the brake pedal to complete the self-setting position. Replace the brake light switch.
5
2
Share

How many years does a novice need to drive on the highway?

Novices can drive on the highway after one year. Precautions for driving on the highway are as follows: 1. Vehicle inspection: Focus on fuel, oil, steering, brakes, tires, wipers, lights, etc. 2. Plan the route: Maps, navigation, road signs, speed limit signs, etc. 3. Accompanied by an experienced driver: During the probationary period, please be accompanied by a driver with more than 3 years of driving experience, and do not take chances. 4. Speed: The speed should be controlled between 90-120km/h for the most fuel-efficient driving. The minimum speed limit on the highway is generally 60 km/h, and driving too slowly can also result in a fine. 5. Lights: Always check the rearview mirror for vehicles when changing lanes, and develop the good habit of using turn signals when changing lanes. 6. Night driving: Try to avoid driving on the highway at night. Even if there are no cars on the road, the limited visibility due to darkness makes it difficult to identify obstacles on the road, posing safety risks.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.