What is the 0-100 km/h acceleration time for the 10th-generation Accord 1.5t?

1 Answers
StDelilah
07/30/25 12:10am
According to official data, the 10th-generation Accord 1.5t has a measured 0-100 km/h acceleration time of 8.07 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in layman's terms, indicates how much force is available. The greater the torque, the more force is available to propel the vehicle, naturally resulting in faster acceleration. The 2022 Accord 260TURBO Comfort Edition has a maximum torque of 260 Nm and a 0-100 km/h acceleration time of 7.6 seconds. The 10th-generation Accord 1.5t has a torque of 260 Nm and a 0-100 km/h acceleration time of 8.07 seconds. Transmission efficiency: The transmission is the medium for transferring power, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The 10th-generation Accord 1.5t is equipped with a continuously variable transmission (CVT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The 2022 Accord 260TURBO Comfort Edition has a power-to-weight ratio of approximately 131 Hp/T and a 0-100 km/h acceleration time of 7.6 seconds. The 10th-generation Accord 1.5t has a power-to-weight ratio of 128 Hp/T and a 0-100 km/h acceleration time of 8.07 seconds.
Was this review help?
12
3
Share
More Forum Discussions

What are the causes of engine cracks?

Engine cracks can be caused by inherent manufacturing defects, improper usage, and inadequate maintenance. Manufacturing defects: Such as sand holes, shrinkage porosity, gas pores, as well as poor aging and stress concentration zones, which can lead to cracks in the engine block. Improper usage: For example, suddenly adding a large amount of cold water when the engine is overheated and lacks water; adding a large amount of hot water when starting the engine on a cold winter morning; starting the engine first and adding cold water only after the temperature rises; not using antifreeze in winter, parking for a long time without draining the cooling water, causing the cooling water to freeze and crack the engine block. Improper maintenance and repair: Not tightening the main bolts and auxiliary bolts as specified; using self-made water plugs with excessive interference; cracking the engine block during flipping due to lack of specialized repair tools. During usage and maintenance, the above issues should be noted to prevent engine block cracks.
1
5
Share

What is the normal oil temperature for a Volkswagen CC?

The normal oil temperature for a Volkswagen CC is between 110-115°C, with a maximum temperature of 119°C. Operating temperature: During normal driving, due to the effect of the coolant, the oil temperature will drop to around 80~90°C. At low speeds, the coolant temperature will rise, and the oil temperature will correspondingly increase to about 100°C. If the vehicle is driven at higher speeds, the oil temperature can reach around 110°C, but it typically does not exceed 120°C. Additionally, the design temperature of the oil is generally around 130°C, which is higher than the coolant temperature. During aggressive driving, the oil temperature can even reach or exceed 150°C. Reasons for temperature increase: The rise in oil temperature can be attributed to increased resistance in coolant flow due to radiator scale or dirt buildup, or reduced coolant flow caused by a loose water pump belt.
11
1
Share

Where is the protruding part on the left wiper?

The protruding part on the left wiper is located at the connection point between the wiper blade and the metal swing arm of the wiper. The method for using the car wiper is as follows: 1. Locate the wiper control lever on the lower left side of the steering wheel; 2. Push the wiper lever up one gear to start the wiper operation; 3. To turn off the wiper, push the lever down to the 'off' position. The function of the wiper is to remove raindrops, debris, and dust attached to the vehicle's windshield, thereby improving the driver's visibility and enhancing driving safety. The method for replacing the wiper is as follows: 1. Lift the wiper up and press the clip below to remove the wiper rubber; 2. Remove the wiper and lift the front end of the middle clip; 3. Insert the wiper into the middle clip and pull it tight by hand. Once you hear a click sound, the replacement is complete.
3
1
Share

What is the tire model of the Peugeot 301?

Peugeot 301 tires are GITI COMFORT 221, with a size of 195/55/R16. Introduction to the Peugeot 301: 1. Exterior: The front face has been upgraded to a new inverted trapezoidal grille and "Lion Eye" headlight cluster, adding LED daytime running lights and standard front fog lights across all models. At the rear, the new car features Peugeot's signature lion claw-style taillight cluster. 2. Tires: Two tire sizes are available—185/65R15 and 195/55R16—along with two different rim styles. All models come standard with four-wheel disc brakes and four airbags. 3. Powertrain: Equipped with a 1.6L engine, delivering a maximum power of 86kW (117PS) and a maximum torque of 150Nm, paired with either a 5-speed manual or 6-speed automatic transmission.
17
0
Share

Is the abbreviation for Yunnan license plates Dian or Yun?

Yunnan license plates are abbreviated as Yun. The codes for other license plates in Yunnan Province are as follows: YunA is Kunming City, YunB is Dongchuan City, YunC is Zhaotong City, YunD is Qujing City, YunE is Chuxiong Yi Autonomous Prefecture, YunF is Yuxi City, YunG is Honghe Hani Autonomous Prefecture, YunH is Wenshan Zhuang and Miao Autonomous Prefecture, YunJ is Simao City, YunL is Dali Bai Autonomous Prefecture, YunK is Xishuangbanna Autonomous Prefecture, YunM is Baoshan City, YunN is Dehong Dai Autonomous Prefecture, YunP is Lijiang City, YunQ is Nujiang Lisu Autonomous Prefecture, YunR is Diqing Tibetan Autonomous Prefecture, YunS is Lincang City. A license plate is a sign that identifies a vehicle, consisting of a vehicle registration authority code and a plate number. The plate number consists of 5 characters, which can be Arabic numerals or a combination of Arabic numerals and English letters.
7
2
Share

What are the symptoms of a slipping clutch disc?

The following are the symptoms of a slipping clutch disc: 1. When you step hard on the accelerator, the engine speed increases rapidly, but the vehicle speed does not increase accordingly. You can clearly feel a lack of acceleration power. 2. When starting the car with the clutch pedal fully released, you still feel insufficient starting power or difficulty in starting. 3. The slipping is more noticeable when the car is heavily loaded going uphill or driving on muddy or soft roads. In severe cases, a burning smell may emit from the clutch. 4. When braking while driving, the engine does not stall but continues to run normally. A slipping clutch can easily cause the following hazards: 1. Power loss, energy dissipation, rolling back on slopes, insufficient reverse traction, and weak driving performance. 2. Incomplete separation can cause instant damage to the transmission gears, drive shaft, and differential, and prolonged use can lead to engine damage.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.