What is the 0-100 acceleration time of the Lincoln Aviator?

2 Answers
LondynLynn
07/24/25 8:17am
Lincoln Aviator accelerates from 0 to 100 km/h in just 6 seconds. The Aviator is equipped with a 3.0L V6 turbocharged engine and a new 10AT transmission system, which enhances its performance. It also comes standard with a four-wheel drive system. Below is some related information about the Lincoln Aviator: 1. The dimensions of the Lincoln Aviator are 55080 mm in length, 2022 mm in width, and 1759 mm in height, with a wheelbase of 3025 mm. 2. The Lincoln Aviator offers one powertrain option, featuring a 3.0T V6 twin-turbocharged engine with a maximum power of 261 kW and a maximum torque of 553 Nm.
Was this review help?
17
5
Share
AubreeDella
08/11/25 3:57am
I've been driving the Lincoln Aviator for quite some time, and its 0-100 km/h acceleration time is approximately 5.7 seconds, based on my personal experience and common test data. This is thanks to the 3.0-liter V6 turbocharged engine paired with a 10-speed automatic transmission. When you step on the gas pedal at launch, the car zooms forward instantly, delivering strong but not overly aggressive acceleration. In daily driving on highways or city roads, this acceleration capability allows me to overtake effortlessly or handle emergencies with ease. On rainy days with slippery roads, the time might extend slightly to around 6 seconds, so it's important to pay attention to tire grip. Compared to other SUVs in the same class, like the BMW X5, it feels more sporty, though fuel consumption is slightly higher. I think the car strikes a good balance—quick yet stable, with strong chassis support during cornering, making it exhilarating to drive. Regular engine maintenance is recommended to maintain peak performance. Overall, acceleration time is a practical metric that helps me weigh power and efficiency when choosing a car.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

What is the Lorinser car brand?

Lorinser is a world-renowned German car modification brand. Here is the relevant content: Introduction to Lorinser: Lorinser is a world-renowned German car modification brand, mainly marketing Mercedes-Benz Lorinser business vehicles, imported Mercedes-Benz business vehicles, Lorinser business vehicles, Mercedes-Benz Lorinser VIP vans, and lorinser imported business vehicles. Lorinser's development in China: Lorinser entered the Chinese market as early as 1995, making it one of the earliest Mercedes-Benz customization brands to enter the country. It was once promoted and sold under names such as "Lorinser" and "Lorinser Plus." However, due to factors such as market conditions, the economy, and consumer awareness of customized vehicles, Lorinser has not gained widespread recognition and faces challenges in its development path in China.
7
4
Share

How to Open the Trunk of an Audi A6?

Audi A6 trunk opening methods: 1. Press and hold the car logo button in the center of the remote key for 3 seconds to unlock, but it won't pop open automatically - you need to lift the lid yourself; 2. There's a keyhole above the license plate where inserting and turning the key can also unlock it, allowing you to raise the lid. The Audi A6 is a luxury vehicle produced by Audi, with dimensions of 5012mm in length, 1855mm in width, and 1485mm in height, and a wheelbase of 2945mm. Exterior-wise, the front fascia integrates what was previously separated radiator and intake grilles into a single trapezoidal grille, while the rear adopts slightly raised angular edges instead of rounded curves for aerodynamic spoiler effect.
20
1
Share

What is the method to clear the maintenance reminder on the Peugeot 408?

The method to clear the maintenance reminder on the Peugeot 408 is: 1. Turn on the power (without starting the engine) and reset the small trip meter on the dashboard; 2. Press the right button to switch the display to instantaneous fuel consumption; 3. Turn off the power and hold the right button without releasing it; 4. Turn on the power for self-check and continue pressing the right button for more than 3 seconds; 5. Release the right button, then press both the left and right buttons simultaneously, and release both buttons within 2 seconds. The Peugeot 408 is a compact sedan equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 136 hp, and paired with a 6-speed dual-clutch transmission.
9
5
Share

What grade of gasoline should be used for the Audi Q5?

Audi Q5 requires 95-octane gasoline, as it is equipped with a turbocharged engine that demands higher fuel quality. The gasoline grade refers to the octane rating and anti-knock properties, with higher grades indicating better anti-knock performance. The appropriate gasoline grade for a vehicle is determined by the engine's compression ratio. The Audi Q5 is a mid-size SUV under the Audi brand, with body dimensions of 4629mm in length, 1898mm in width, and 1655mm in height, a wheelbase of 2807mm, a maximum power output of 155kW, and a maximum torque of 350Nm. It features the quattro permanent all-wheel-drive system.
5
5
Share

What Causes Audi to Shake When Starting Cold?

Audi shaking when starting cold may be caused by: insufficient temperature inside the engine, large spark plug gaps, or aging ignition coils. The solutions include: keeping the engine warm and regularly cleaning the fuel system. Audi is a luxury car brand under Audi AG, a subsidiary of the Volkswagen Group in Germany, representing classic car models. The company is headquartered in Ingolstadt, Germany, and has subsidiaries in many countries including China. Taking the Audi A6L as an example: it is a car series developed by FAW-Volkswagen Audi based on the new A6 in Germany, with a body length, width, and height of 4915mm, 1874mm, and 1455mm respectively, and a wheelbase of 2912mm.
13
1
Share

How to Drain Windshield Washer Fluid from the Car?

Methods to drain windshield washer fluid from the car: It can be sprayed out through the windshield wipers. If the windshield washer fluid is frozen, do not attempt to spray it, as continuously operating the windshield washer for several seconds can cause the washer motor to overheat, leading to expensive repair costs. In cold weather, when adding windshield washer fluid to the car, if tap water has been previously added to the reservoir, it is essential to drain it completely. This is because mixing windshield washer fluid with tap water can easily cause freezing. To drain the fluid, you can continuously spray the windshield for a while until no more water comes out, and then add the windshield washer fluid.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.