What is TCS?

1 Answers
MacMax
07/29/25 4:10pm
TCS stands for Traction Control System. The specific introduction is as follows: 1. Traction Control System: For many large-displacement models, a traction control system is generally equipped. Currently, the more common English abbreviations for traction control systems in China are TCS, ASR, and TRC, among which TCS has the highest visibility. 2. Working Principle: The TCS traction control system determines whether the drive wheels are slipping based on the rotation speed of the drive wheels and the transmission wheels. When TCS detects wheel slip, it will reduce the engine torque output or apply brakes to the slipping wheel to prevent it from slipping.
Was this review help?
20
0
Share
More Forum Discussions

What is the speed range for manual transmission gears?

Manual transmission gear speed correspondence table is as follows: 1st gear: Used for normal starting or climbing very steep slopes. When using this gear, the speed is generally around 10 kilometers per hour; 2nd gear: A transitional gear for acceleration after starting, or used for low-speed driving or climbing steep slopes, with speeds generally around 20 kilometers per hour; 3rd gear: Used at speeds between 20-40km/h, commonly used for city driving; 4th gear: Used at speeds between 40-60km/h; 5th gear: Can be used at speeds of 60Km/h. When shifting gears, the clutch and throttle must be coordinated well. Press the clutch all the way down, then immediately release the throttle pedal, and quickly shift to the corresponding gear. After shifting, release your hand immediately and avoid keeping it on the gear lever (commonly known as the gear stick) for too long, as this can easily damage the gear lever.
6
2
Share

Should You Press the Accelerator While Releasing the Clutch?

When starting a manual transmission car, it is necessary to release the clutch while pressing the accelerator, which is called clutch-accelerator coordination. Here is an introduction to the related content for starting: 1. Correct Coordination: Proper clutch-accelerator coordination should be adjusted according to the vehicle speed. During the starting phase, place the gear in neutral, start the engine, press the clutch pedal, shift the gear lever into first gear, slowly release the clutch, and coordinate with the accelerator pedal to ensure a smooth start. 2. Precautions: The clutch pedal must be fully depressed when pressing it. During the process of slowly releasing the clutch pedal, feel the vehicle's vibration and movement tendency. When the vehicle shows slight vibration and a tendency to move, gently apply the accelerator, continue to slowly release the clutch pedal until it is completely released, ensuring a smooth start. Clutch-accelerator coordination is equally important when shifting gears while the vehicle is in motion. As the vehicle speed increases, the process of clutch-accelerator coordination gradually shortens, meaning the speed of releasing the clutch pedal should be accelerated.
9
0
Share

What does the car air conditioner displaying 'lo' mean?

When a car air conditioner displays 'lo', it indicates the maximum cooling mode. Below is an introduction to related content about car air conditioners: 1. Car air conditioner modes: 'lo' stands for maximum cooling. When the vehicle's air conditioner panel displays 'lo', it means the air conditioner is currently in the lowest temperature cooling state, and the system is working at full capacity to cool. 'Hi' is the abbreviation of the English word 'high', meaning 'high'. When the air conditioner panel displays 'hi', it indicates the air conditioner is working at full capacity to heat, typically at 30 degrees Celsius. In this mode, the air conditioner transfers heat from the engine coolant into the cabin. 2. Precautions: Of course, if the vehicle is in a cold state, heating may be affected. Once the water temperature rises, heating will return to normal. Do not rest in the car with the air conditioner running while parked. When the car engine is running, incomplete combustion of gasoline in the cylinders can produce high concentrations of carbon monoxide, leading to poisoning.
2
0
Share

What kind of oil is used in the ea111 engine?

ea111 engine uses fully synthetic oil because it is a turbocharged engine. You can use 5W-30 oil, but the premise is that this 5W-30 must be a relatively high viscosity oil that meets the 50200 standard among 5W-30 oils. Oil selection: When choosing engine oil, the most expensive option is not necessarily the best. Instead, you should select the appropriate oil based on the characteristics of your car's engine and your usual driving habits. You can categorize the selection by the oil used in winter and the oil used in summer. For winter use, the primary consideration is the low-temperature viscosity grade. In summer, when temperatures are high, there's no need to choose oil with a better low-temperature viscosity grade. Function of engine oil: Engine oil serves multiple purposes for the engine, including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the "blood" of the car. Choosing the right oil and changing it regularly can maintain the engine in good condition and extend its service life.
7
3
Share

What Maintenance is Needed at Two Years or 20,000 Kilometers?

At two years or 20,000 kilometers, the maintenance required includes car tires, engine oil, and throttle body, among others. Below is a detailed introduction to car maintenance: 1. Overview: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Currently, car maintenance mainly covers the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more. 2. Purpose: The goal of car maintenance is to keep the vehicle clean and in good technical condition, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
13
3
Share

How many minutes does a car have to leave immediately?

There is approximately 2 minutes for a car to leave immediately. Below is detailed information about traffic violations: 1. Overview: Traffic violations refer to acts where motor vehicles violate the Road Traffic Safety Law and traffic management regulations. Penalties for traffic violations include warnings, fines (vehicle impoundment), temporary suspension of driver's license, revocation of driver's license, cancellation of driver's license, administrative detention, and criminal liability for acts that constitute crimes. 2. Basis for Penalties: According to the 'Road Traffic Safety Law of the People's Republic of China,' traffic police and traffic management departments of public security authorities should promptly correct any illegal acts related to road traffic safety. Penalties for road traffic safety violations should be imposed based on facts and relevant provisions of this law.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.