What is SWM?

1 Answers
Alana
07/29/25 2:47pm
SWM refers to SWM Motors, which has design and R&D centers in Milan, Italy, and Chongqing, China. It possesses extensive development experience in vehicle design, engine development, and performance matching, along with key design capabilities such as data analysis, CAE simulation design, NVH analysis, reliability verification, chassis matching, and vehicle electrical system matching. SWM's SUV models include the G01, X3, G05, and X7. Among them, the SWM G05 is a midsize SUV with dimensions of 4750mm in length, 1860mm in width, and 1780mm in height, and a wheelbase of 2750mm. The SWM G05 is equipped with two engine options: a 2.0L naturally aspirated engine and a 1.5L turbocharged engine.
Was this review help?
14
0
Share
More Forum Discussions

What is the normal pressure for a car air conditioning system?

Under normal operating conditions, the low pressure of an air conditioning system ranges between 1.0~2.5 bar, while the high pressure ranges between 15~18 bar. Overview: The automotive air conditioning refrigeration system consists of components such as the compressor, condenser, receiver-drier, expansion valve, evaporator, and blower. These components are interconnected using copper pipes (or aluminum pipes) and high-pressure rubber hoses to form a sealed system. During operation, the refrigerant circulates through this sealed system in different states, with each cycle comprising four fundamental processes. Testing: When the engine throttle is increased, the measured low pressure should decrease correspondingly with the engine's RPM. The faster the RPM, the more (or quicker) the pressure should drop. This indicates good compressor performance; otherwise, it suggests a compressor malfunction.
14
4
Share

What is the biggest problem with the ix25?

The biggest problem with the ix25 is its poor driving force. Here is some information about Beijing Hyundai: 1. Introduction: Beijing Hyundai Motor Co., Ltd. (BEIJING-HYUNDAI AUTO, referred to as "Beijing Hyundai"). 2. Content: It is a Sino-foreign joint venture company engaged in the production and sales of automobiles, established on October 18, 2002, with its headquarters located in Beijing. Beijing Hyundai's product line covers various market segments including A0-class, A-class, B-class, and SUVs. 3. Development: In September 2018, the China Passenger Car Association released the wholesale sales ranking of China's passenger vehicles for August 2018, with Beijing Hyundai ranking 7th with sales of 71,006 units.
11
4
Share

Why is one side of the car air conditioner cooling while the other side is not?

If one of the air vent motors is damaged, it can cause one side of the air conditioner to not cool. If the issue is identified as this, the motor needs to be replaced. Air valve plate stuck: If the air valve plate is stuck, it hinders the rotation of the valve plate, which can also affect the airflow on one side. It should be promptly cleared. One side of the air duct is blocked: If one side of the air duct is blocked, the air duct needs to be cleaned to resolve the issue. Dual-zone control is activated: For automatic air conditioners, it might be due to the dual-zone control function being turned on. In this case, simply deactivating the dual-zone air conditioning function will solve the problem.
16
4
Share

How to Determine if the Brake Check Valve is Damaged?

If the check valve does not function, it indicates that the brake check valve is damaged. Below is a detailed explanation of the check valve: 1. Definition: A check valve, also known as a non-return valve or one-way valve, allows fluid to flow in only one direction. If reverse flow occurs, the valve automatically closes to prevent high-pressure fluid from entering a low-pressure system. 2. Precautions: When installing a check valve, special attention must be paid to the direction of fluid flow. The normal flow direction should align with the arrow indicated on the valve body; otherwise, it will block the normal flow of the medium. The bottom valve should be installed at the bottom end of the pump suction pipeline. When the check valve closes, it can cause water hammer pressure in the pipeline, which may severely damage the valve, pipeline, or equipment, especially in large-diameter or high-pressure pipelines. Therefore, users should pay close attention to the selection of check valves. Check valves are designed solely to prevent reverse flow of fluid media in various pipelines or equipment and function as one-way shut-off valves.
1
4
Share

Can the temporary license plate be directly discarded after obtaining the official one?

After obtaining the official license plate, the temporary one can be discarded, but it needs to be destroyed before disposal. The differences between the official license plate and the temporary license plate for a new car are as follows: 1. Validity period: The official license plate is valid for a long time, essentially accompanying the vehicle for its lifetime, while the temporary license plate is valid for 5 to 15 days, with a maximum of 30 days. 2. Installation method and hanging position: The official license plate is installed using anti-theft fasteners at designated positions on the front and rear of the vehicle, whereas the temporary license plate must be affixed to the inside of the front and rear windshields as per regulations. 3. Material: The official license plate is made of aluminum alloy, while the temporary one is paper-based.
17
5
Share

What car has a horizontal bar in the middle?

The car with a horizontal bar in the middle is the Genesis Coupe. Here are specific details about the Genesis Coupe: 1. Background: The Genesis Coupe is a premium sports coupe launched by Hyundai Motor following the Genesis, introduced in China in March 2009. This model, derived from the Rohens brand and platform, is Hyundai's strategic vehicle for entering the luxury car market. The Genesis Coupe embodies the concept of 'creating a pure driving experience,' taking 25 months to develop to the highest standards of luxury sports cars. It measures 4,630mm × 1,865mm × 1,385mm (L×W×H) with a 2,820mm wheelbase, featuring a front-engine, rear-wheel-drive layout, high-performance engines, advanced transmissions, comprehensive safety systems, and luxurious interior configurations across its platform, powertrain, handling, safety, exterior design, interior, and comfort features. 2. Outstanding Performance: The Genesis Coupe's superior performance is fundamentally ensured by Hyundai's Lambda RS 3800 V6 all-aluminum engine and its first self-developed Theta 2.0 TCI turbocharged engine.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.