···
Log in / Register

What is Subject 4 Really Called?

5 Answers
ElizabethFitz
07/23/25 8:27pm
Subject 4 is called the Safe and Civilized Driving Knowledge Test. The main content includes aspects such as safe driving and civilized driving, especially knowledge on how to handle unexpected situations and the corresponding measures to take. Below are the precautions for the Subject 4 test: 1. Verify Information: After sitting down, first verify the examinee information. If it does not match your own, check if it is your seat. If not, find your correct seat. If the seat is correct but the information is wrong, report it immediately. 2. Follow Exam Room Rules: During the Subject 4 test, adhere to the exam room discipline. If you make loud noises while waiting, you will be directly expelled and disqualified from the test that day. 3. Follow Instructions: Obey the staff's arrangements. If you have any issues, raise your hand and ask the examiner if you don't understand. Don't be afraid. 4. Adjust the Camera Position: Adjust the camera to focus on the upper third of your face and chest. If your face does not appear within the monitoring range, your score will be invalidated.
Was this review help?
15
4
Share
SamanthaAnn
08/10/25 4:06pm
Many people ask me about the driving license test, and what they call 'Subject 4' is not actually called Subject 4. The official name is 'Subject 3: Safe and Civilized Driving Knowledge Test.' During the driving test, this section mainly assesses safety knowledge, such as traffic rules, yielding to pedestrians, consequences of drunk driving, etc. The questions are all multiple-choice or true/false, not very difficult but highly practical. Instructors always emphasize that passing it proves you understand basic driving safety, otherwise you cannot hit the road. Some people mistakenly think 'Subject 4' is an independent part, but it actually belongs to the Subject 3 system. It's recommended to practice more with question bank apps while preparing, as familiarity with the questions makes passing in one go not too hard, and you can also learn many small tips to protect yourself and others. Safety always comes first—don’t underestimate this test.
Was this review help?
11
0
Share
Expand All
AddysonAnn
09/23/25 3:36am
I just got my driver's license, so I know this well. 'Subject 4' isn't the official term—the correct name is the Subject 3 Safe and Civilized Driving Knowledge Test. The exam covers traffic sign recognition, emergency handling, and other theoretical knowledge. During driving school, Subject 3 is split into practical driving and this written test. People call it 'Subject 4' out of habit, but officially, it's defined as part of Subject 3. While preparing, I practiced questions daily, covering a wide range like new traffic rule updates and safe driving principles. Passing this test is crucial to getting your license. The content isn't hard but requires focus—mastering it helps reduce accident risks, making it essential for beginners.
Was this review help?
8
1
Share
Expand All
VanJesse
11/06/25 5:50am
When it comes to getting a driver's license, Subject 4 is often misunderstood. It should actually be called the Subject 3 Safety and Civilized Driving Knowledge Test. The test is very simple, consisting of single-choice or multiple-choice questions on safety knowledge. The content includes traffic regulations, accident prevention points, etc. It is called Subject 4 because Subject 3 has a practical driving component, and people colloquially simplified it. The official exam syllabus clearly refers to it as the Safety and Civilized Knowledge Test. Just memorize the key points before the exam, covering areas such as the importance of seat belts and driving techniques for rainy or snowy weather. Learning these will be very helpful for your driving. Ensuring a pass on the first attempt can speed up the licensing process.
Was this review help?
1
0
Share
Expand All
EllaDella
11/06/25 5:52am
As someone who cares about driving safety, I often emphasize that the official name of 'Subject 4' is the 'Subject 3 Safety and Civilized Driving Knowledge Test'. This exam is crucial as it evaluates drivers' understanding of road safety and traffic rules. The questions cover topics such as the dangers of drunk driving and the risks of speeding, all in multiple-choice format. Passing it proves you possess basic safety awareness and helps reduce traffic accidents. The official definition prioritizes safety first, with reasonably set difficulty levels. During preparation, focusing on question bank practice is recommended. Post-exam reviews can reinforce memory and promote more standardized driving practices. Avoid using the misnomer 'Subject 4'—adopting its full name makes learning more effective.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

How to Deal with Glue Residue After Removing Window Tint Film?

Methods for handling residual adhesive from car window tint film are as follows: 1. The leftover adhesive from car window tint film can be wiped off using makeup remover oil or asphalt cleaner; 2. You can also use polyurethane thinner, commonly known as 811 cleaner, for wiping; 3. Lastly, another method is to use essential balm, which has fast volatile properties and low cost. Removing car window tint film requires certain steps and techniques, detailed as follows: 1. Peeling the film: First, lift a corner of the car window tint film, preferably using a fingernail or adhesive tape. If that doesn't work, consider using a blade to peel it. 2. Removing the film: With the help of hot air from a heat gun or hairdryer, use appropriate force and speed to slowly peel off the car window tint film. 3. Removing adhesive: If there is any residual adhesive from the glass film after peeling, clean it off with adhesive remover or cleaning agent.
1
2
Share

What are the causes of Camry idle vibration?

Camry idle vibration may be caused by the following reasons: 1. Severe engine carbon deposits - The most common cause of car vibration is dirty throttle valves or excessive carbon buildup in fuel injectors. When there's too much carbon deposit inside the engine, the gasoline sprayed by cold start injectors will be largely absorbed by these deposits; 2. Engine misfire - This mainly refers to one or more cylinders not working properly, manifested as: intermittent exhaust gas flow with noticeable exhaust pipe vibration, obvious engine vibration that can be felt, sometimes accompanied by "popping" sounds. This is mostly related to ignition coil failure; 3. Uneven air-fuel mixture in the engine can also cause idle vibration after cold start. The lower the temperature, the more fuel required for cold start, and the presence of carbon deposits will significantly affect whether cold start proceeds smoothly.
3
4
Share

Does idling the car with the heater on cause damage to the vehicle?

Idling the car with the heater on does not cause damage to the vehicle as long as the engine reaches its normal operating temperature. However, if the heater is turned on while the engine is still cold and has not reached its normal operating temperature, it can slow down the engine's warming process, leading to increased fuel consumption. Nevertheless, this does not harm the car. Below is some relevant information: 1. The fuel consumption when using the heater during idling depends on the car's displacement and engine tuning. For household cars, idling with the heater on for one hour consumes approximately 1 to 2 liters of fuel, though this may vary depending on the car model. 2. While idling with the heater on does not cause serious damage to the car, it can affect the passengers inside. Since the fuel does not burn completely during idling, carbon monoxide is produced. If the windows are not opened, the concentration of carbon monoxide inside the car can gradually increase, potentially leading to carbon monoxide poisoning for the passengers.
5
2
Share

Can I use my original license plate when changing to a new car?

When changing to a new car, you can retain your original license plate. For car owners who wish to keep their original plate, it is essential to ensure that the original plate has been used for more than one year. Only then will the plate be retained under the original owner's name during the transfer process. The retention period is one year. If the owner does not apply to reuse the plate within this period, it will automatically expire after one year, and the vehicle management office will reclaim the plate, making it unavailable for future use. The required documents for changing the car without changing the plate are as follows: 1. "Motor Vehicle Transfer or Registration Application Form"; 2. Original and copy of the owner's ID card; 3. Proof of vehicle purchase tax payment or tax exemption certificate, vehicle annual inspection certificate, and relevant documents submitted during vehicle registration; 4. Non-local residents also need to bring a residence permit and proof of the vehicle's origin; 5. For imported vehicles, additional documents include import certificates, vehicle whole-vehicle factory qualification certificate, and compulsory traffic insurance certificate.
7
5
Share

Should the tire pressure be the same for front and rear wheels of a sedan?

Front tire pressure and rear tire pressure can be different, but the difference should not be too large. Tire pressure is a range, not an exact value. In certain specific situations, it is more appropriate for the rear tire pressure to be higher than the front tire pressure. Below is relevant information: 1. For example, when the rear seats are fully occupied by three people and the trunk is also loaded with many items, the rear tire pressure should be higher than the front tire pressure. Higher rear tire pressure can make the car more fuel-efficient, resulting in lower fuel consumption. Additionally, the car can accelerate faster. The principle is: the higher the tire pressure, the smaller the contact area between the tire and the ground; the lower the tire pressure, the larger the contact area. 2. The front wheels are not only the driving wheels but also the steering wheels. If the front tire pressure is higher, the wear on the front tires will increase. Both the front and rear tire pressures must be within the standard range, and the difference should ideally not exceed 0.1bar.
18
5
Share

Is 0W40 Oil Suitable for All Seasons?

0W40 engine oil is considered all-season oil, but its suitability still depends on the temperature of the location where the vehicle is used. The 0W designation indicates the oil's cold-start performance—the smaller the number, the better the oil's cold resistance. Therefore, using 0W40 oil allows for easy engine starts even in cold weather. The number 40 represents the kinematic viscosity standard at 100°C (between 12.5mm²/s and 16.3mm²/s). Additional information: 1. In fact, many modern engine oils are designed for both winter and summer use, primarily depending on the oil's quality grade and performance. If the engine frequently operates under high-load conditions (accelerating oil consumption), it is advisable to use full synthetic or semi-synthetic oil. 2. As for quality grades, following the level specified in the vehicle's manual is generally sufficient for daily use. However, if the vehicle is often driven in congested urban environments, upgrading to a higher-grade oil (more environmentally friendly and economical) may be considered.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.