···
Log in / Register

What is Subject 2 Simulation Training?

4 Answers
Lauren
07/29/25 12:43pm
Subject 2 simulation is a practice that mimics the official Subject 2 driving test to improve the pass rate. The simulation covers the same test items as the official exam, serving as a trial run. Below are the relevant details: 1. Overview: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. 2. Test Items: For car licenses C1 and C2, the test includes five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as the S-curve). Some regions may also include a sixth item, such as highway toll card collection. 3. Learning Objectives: Master the basic essentials of driving operations and acquire fundamental vehicle control skills; become proficient in basic methods of field and road driving within the test area; develop the ability to reasonably use vehicle controls and correctly manage the spatial position of the vehicle, ensuring precise control over the vehicle's position, speed, and route.
Was this review help?
3
2
Share
DiElizabeth
08/14/25 12:54am
The simulated training for Subject 2 is essentially a practice that fully replicates the real exam scenario. The field markings, specifications of the exam vehicle, and even the voice announcement system are identical to those in the actual test center. Driving schools design it this way to help us get familiar with the exam rhythm. During training, I noticed that instructors intentionally set up typical error situations like exceeding the time limit for parallel parking or stalling on a slope start, specifically to train our emergency handling skills. The most crucial part is the unlimited retries, offering much higher error tolerance than the actual exam. After three simulation sessions, my accuracy in maintaining the 30cm distance during right-angle turns significantly improved, and I became more confident in increasing speed during curve driving.
Was this review help?
8
3
Share
Expand All
MacAmir
10/09/25 5:30am
The Subject 2 mock training is literally a dress rehearsal before the actual exam! It involves practicing with a coaching car equipped with the exam system on a 1:1 replicated test course. Last week during the mock session, the system suddenly announced that my car body crossed the line during reverse parking, resulting in an immediate 100-point deduction—my palms were sweaty with tension. The instructor said this high-pressure practice is great for mental conditioning, so you won’t panic when unexpected situations arise in the real exam. I also noticed that the exam car’s steering wheel is heavier than the practice car’s, making early adaptation crucial. Each mock session includes the instructor recording all minor mistakes on a scoring sheet, like forgetting to pull the handbrake during hill-start parking. Corrections are made immediately after practice, doubling the efficiency compared to regular training.
Was this review help?
6
1
Share
Expand All
Cassidy
11/22/25 6:45am
The Subject 2 simulation training is a practical exercise conducted by the driving school according to exam standards. The training ground is built exactly to the specifications of the local test site, with no deviation in the width of parking spaces or the angle of ramps. It is equipped with the same infrared monitoring devices used in the actual exam, which immediately trigger an audio alert if the vehicle crosses the line. I focused on practicing extreme maneuvers for reverse parking, with the instructor requiring the entire sequence to be completed within 1 minute and 30 seconds, and the wheels must come within 10 centimeters of the corner of the parking space to pass. This level of precision training is unattainable during regular lessons.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

Which brand of tires is best for Volkswagen Tiguan?

For Volkswagen Tiguan, it is recommended to replace the tires with Michelin tires or tires from well-known brands. Below is an introduction to relevant information about car tires: Functions of tires: Support the entire weight of the vehicle, bear the load of the car, transmit traction and braking torque, ensure the adhesion between the wheels and the road; reduce and absorb the vibrations and impacts during driving, prevent severe vibrations and early damage to car components, adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and fuel economy. Precautions for tire use: Increase awareness of tire safety, inspect tires frequently, and conduct thorough and detailed checks before driving on highways; in addition to tire pressure, observe whether there are cracks on the tire sidewalls and the wear condition of the tread, and eliminate potential hazards promptly; regularly correct wheel balance if it exceeds the standard.
17
5
Share

Which transmission is used in the Toyota Corolla?

The Corolla uses a 4AT transmission. The functions and working principles of the transmission are as follows: Functions of the transmission: Change the transmission ratio to expand the range of torque and speed variation of the drive wheels; enable the vehicle to reverse while maintaining the same engine rotation direction; it is a mechanism used to alter the speed and torque from the engine, capable of fixing or changing the transmission ratio between the output and input shafts in steps. Working principle of the transmission: Speed and torque variation are achieved through hydraulic transmission and gear combination. The torque converter is located at the front end of the hydraulic automatic transmission and is mounted on the engine's flywheel. Its function is similar to the clutch in a car, and it can automatically and continuously change the transmission ratio and torque ratio within a certain range according to changes in the vehicle's driving resistance, providing a certain degree of speed reduction and torque increase.
3
2
Share

Where is the transmission oil filler port located on the Changan Oushang A800?

Changan Oushang A800's transmission oil filler port is located on the left side of the transmission tail, while the drain port is situated on the oil pan at the bottom of the transmission. Below is an introduction to related information about transmission oil: Color of transmission oil: Automatic transmission oil comes in various colors, with the most common being a light red translucent liquid. Other colors include green, yellow, blue, kiwi, and blue. Users should select the appropriate ATF oil as required by the car manufacturer. The different colors are also intended to prevent users from mixing different types. Transmission oil replacement interval: If the transmission can consistently maintain an operating temperature of 80 degrees Celsius while driving, the transmission oil's lifespan can reach 150,000 kilometers. However, if the temperature rises higher, the service life of the transmission oil will decrease. It is generally recommended to replace the transmission oil every 80,000 kilometers.
17
0
Share

Does Windshield Washer Fluid Damage Car Paint?

High-quality windshield washer fluid does not damage car paint, but inferior quality fluid can cause harm. The effects of high-quality and inferior-quality windshield washer fluids on car paint are as follows: High-quality windshield washer fluid: Premium windshield washer fluid does not corrode car paint. It is made from deionized water with various environmentally friendly additives, providing functions such as dirt removal, antifreeze, anti-static, and anti-corrosion. Some higher-quality fluids also offer features like rapid snow and ice melting, anti-glare, and anti-fog properties, significantly enhancing driving safety. Inferior-quality windshield washer fluid: In contrast, inferior-quality windshield washer fluid is often diluted with water and alcohol, which can not only reduce the gloss of car paint and the hardness of rubber seals but also cause color differences, swelling, or dissolution in rubber or plastic parts in severe cases.
1
2
Share

How to Remove the Golf Air Filter?

Method for removing the Golf air conditioning filter: Open the engine compartment hood. The air conditioning filter is located inside the air filter box at the front of the engine. Use a screwdriver to loosen the screws on the edge, lift the cover, and then remove the upper cover plate to take out the air filter. Below is an introduction to the functions of the air conditioning filter: 1. It can absorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air. 2. It has strong and lasting moisture absorption capabilities, preventing the car windows from fogging up, ensuring clear visibility for drivers and passengers, and enhancing driving safety. 3. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. 4. It effectively sterilizes and deodorizes, maintaining clean cabin air and preventing bacterial growth, thus creating a healthy environment. 5. It effectively separates solid impurities such as dust, powder, and grinding particles from the air.
20
1
Share

Why does Volkswagen have only one reverse light on?

Volkswagen vehicles have only one reverse light illuminated because a single light makes it easier for drivers to identify. Below are the reasons for having only one reverse light and an introduction to the installation position of reverse lights: Reasons for having only one reverse light: Since 2001, China's traffic laws have been revised to require each vehicle to be equipped with at least one fog light and one reverse light. Vehicles under 6 meters in length are mandated to have one reverse light installed, with the other being optional. In practice, a single illuminated reverse light is more noticeable to drivers. Symmetrical lighting on both sides might cause drivers to become desensitized, potentially mistaking the vehicle ahead for one driving in the wrong direction. A single light is easier to recognize. Installation position of reverse lights: The position of reverse lights is also regulated by national standards. Reverse lights are generally installed on the right side of the vehicle's rear. Since China follows left-hand drive, placing the reverse light on the right side allows drivers to conveniently reverse and park on the right side of the road at night. This arrangement not only complies with national regulations but also reduces production costs.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.