What is Skyactiv Technology?

1 Answers
BraydenLynn
07/29/25 10:16pm
Skyactiv Technology refers to Mazda Motor Corporation's optimization technology for key components of its vehicles, including gasoline and diesel engines, manual and automatic transmissions, chassis, and body structure. The Skyactiv Technology transmissions are divided into automatic transmissions and manual transmissions. The Skyactiv Technology engines are categorized into: 1. Gasoline engines, which feature high compression combustion that significantly improves engine efficiency and enhances torque at low and medium speeds; 2. Diesel engines, characterized by extended ignition timing, which helps mix fuel and air for uniform combustion, reducing air pollutants such as carbon monoxide, hydrocarbons, nitrogen oxides, and particulate matter.
Was this review help?
8
3
Share
More Forum Discussions

Why is the Iveco blower not working?

Iveco blower not working may be due to its own failure, possibly burned out or poor switch contact. The following is relevant information about Iveco trucks: 1. Nanjing Iveco Automobile Co., Ltd.: Nanjing Iveco Automobile Co., Ltd., abbreviated as NAVECO, was established on March 1, 1996. It is a Sino-foreign joint venture jointly invested by Nanjing Automobile Group Corporation and Italy's IVECO S.p.A. 2. Products of Iveco Automobile Co., Ltd.: The company's products are divided into two major platforms: IVECO and Yuejin. The IVECO brand has a design capacity of producing 60,000 Iveco series light vehicles and 75,000 diesel engines annually. The products mainly include four major series: passenger cars, trucks, travel vehicles, and off-road vehicles, covering 3.5 to 6 tons with 7 tonnage levels and 7 wheelbases, including over 200 models such as light buses, trucks, military off-road vehicles, medium-sized buses, and various modified special-purpose vehicles.
5
2
Share

Why is there water dripping under the car when the air conditioner is on in summer?

The reason for significant water dripping under the car when the air conditioner is on: It is condensation water caused by the operation of the air conditioner, which is a normal phenomenon related to the principle of the air conditioner. The specific reasons for significant water dripping under the car when the air conditioner is on are as follows: 1. Evaporator configuration: Since the car's cooling system is equipped with an evaporator inside the dashboard, when the air conditioner is on, the surface temperature of the evaporator is very low. The moisture in the hot air inside the car will condense on the surface of the evaporator's heat-absorbing fins and be collected by the plastic casing of the evaporator. 2. Compressor: Sometimes, the exterior of the compressor installed in the engine compartment may also condense moisture from the air, causing water to drip onto the ground. 3. Lack of insulation foam: If the low-pressure pipeline is not wrapped with insulation foam, the surface of the pipeline is prone to condensing moisture from the air, and water droplets often condense and accumulate at the lowest point of the pipeline, dripping down.
18
1
Share

How to Unlock a Stuck Automatic Transmission P Gear?

Specific steps are as follows: 1. Release the brake pedal, press it again, and then try to shift gears. 2. Slightly turn the steering wheel and then try to shift gears. 3. Restart the engine, press the brake once more, and then try to shift gears. 4. Open the hood, disconnect the battery, and then reconnect it. Restart the engine, press the brake once more, and then try to shift gears. Reasons for P gear lock: 1. When parking, the P gear was engaged before the car came to a complete stop. 2. When the vehicle is parked on a slope, the P gear is engaged first, and then the pedal is released. At this time, the vehicle will slide slightly forward due to its own weight, automatically eliminating the gap of the P gear lock teeth. Both of the above situations can cause the gear lever to get stuck, making it impossible to shift to other gears. In addition, damaged brake light switch, damaged gear shift mechanism, and damaged transmission control unit are common causes of automatic transmission P gear lock.
13
4
Share

What are the reasons why an automatic transmission car doesn't move when pressing the accelerator in D gear?

If your vehicle doesn't move after shifting to D gear and pressing the accelerator, it is likely caused by the following reasons: 1. Sensor signal error: When the transmission shift valve position sensor signal is incorrect, the vehicle cannot detect which gear it is in. 2. Shift valve problem: The gear is not engaged properly, and the oil passage cannot open. 3. Transmission failure: The transmission solenoid valve or electronic module is malfunctioning. 4. Oil level issue: The transmission oil level is too low, or the internal oil pressure is too low. 5. Brake lock-up: This prevents the wheels from moving forward, and pressing the accelerator may produce abnormal noises. 6. Handbrake problem: The handbrake is not released or not fully loosened.
15
4
Share

What does Volvo Care Key mean?

Volvo Care Key refers to a feature that allows the car owner to set certain restrictions on the vehicle's characteristics, which are designed to promote safe driving. The owner can use the Care Key to set speed warnings and determine the maximum volume of the vehicle's speaker system. Additionally, some functions of the car's driver support system will remain constantly activated. Extended information: The role of the Volvo Care Key: With the Volvo Care Key, the owner can set the vehicle's maximum speed and other restrictions at any time. This way, if the vehicle is driven by other family members or friends, the owner can further regulate the driver's behavior to prevent accidents and injuries caused by excessive speed.
2
1
Share

Will points be deducted for not turning off the signal light during a right-angle turn?

Points will not be deducted for not turning off the signal light during a right-angle turn. You can turn off the signal light once the turn is completed. If the signal light is not turned off, simply turn on the turn signal before making the turn, and the light will automatically turn off after the turn when the steering wheel is straightened. However, points will be deducted if the turn signal is not activated at least three seconds before the right-angle turn. Additional tips for right-angle turns: Before entering the right-angle turn, activate the turn signal. Keep the vehicle as far as possible from the turning point marker on one side within the road boundaries (1/3 of the front of the vehicle should press the outer line, and the left ridge of the front should align with the marker point), and proceed slowly. When the rearview mirror on the side closest to the turning point aligns with the turning point, turn the steering wheel fully to that side. Once the vehicle is straight after the turn, straighten the steering wheel.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.