···
Log in / Register

What is required for vehicle inspection in Weihai?

3 Answers
Adaline
07/29/25 4:33pm
You need to bring your ID card and driver's license. Conditions for driver's license verification: Drivers holding a locally issued or out-of-town issued driver's license for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, or large trucks must undergo verification at the vehicle management office within thirty days after the end of each scoring cycle. However, if there are no demerit points recorded during a scoring cycle, the verification for that cycle is exempted. Legal basis: To drive a motor vehicle, one must legally obtain a motor vehicle driver's license. Applying for a motor vehicle driver's license must meet the driving permit conditions stipulated by the public security department under the State Council; after passing the examination, the corresponding category of motor vehicle driver's license will be issued by the traffic management department of the public security organ. Those holding a foreign motor vehicle driver's license who meet the driving permit conditions stipulated by the public security department under the State Council and pass the assessment by the traffic management department of the public security organ may be issued a Chinese motor vehicle driver's license.
Was this review help?
9
4
Share
DelMatteo
08/14/25 5:44am
When getting the vehicle inspected in Weihai, I need to bring several items to ensure a smooth process. The ID card is mandatory for verifying my identity; the vehicle license must be valid, otherwise, they won’t process it; the insurance policy must be the original copy—this is a strict requirement to prove the vehicle has compulsory traffic insurance. The vehicle itself should be well-checked: lights shouldn’t be dim, brakes must be responsive, and tire wear must not exceed the limit. Once, I had a hassle because a brake light was out. Also, don’t forget the car keys and relevant original documents. If the vehicle has modifications, it must be restored to the factory state to pass. I recommend doing a quick self-check before the inspection—check if the engine oil and coolant levels are adequate to avoid being rejected on-site due to faults. It’s best to go early on a weekday to avoid long queues and ensure higher efficiency.
Was this review help?
14
0
Share
Expand All
StArcher
10/12/25 8:26am
Insufficient preparation during vehicle inspection can easily lead to issues. I need to bring the original valid ID card, which is the basic identity proof; the vehicle license must be prepared for verifying vehicle registration information; the insurance policy should be the original to ensure it's valid and covers the inspection date. Additionally, the vehicle condition is crucial—whether the headlights work, the brakes are responsive, and the exhaust meets standards must be addressed beforehand. Once, I overlooked minor details like shallow tire treads and got stuck, having to find a repair shop for a quick fix. In Weihai, special attention might be needed for environmental requirements, ensuring exhaust emissions are compliant. Before the inspection, it's advisable to check the dashboard warning lights to ensure no faults, avoiding a wasted trip. Bringing some cash or preparing for online payment of the inspection fee is also convenient—the cost is low but saves time and hassle.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What is the method for transferring a motorcycle license plate?

To transfer the ownership of a motorcycle that already has a license plate, you must first obtain the "Second-hand Vehicle Transaction Invoice" and then proceed to the local vehicle management office to complete the transfer. Below is a detailed introduction to the motorcycle ownership transfer process: 1. Required documents: Proof of the motor vehicle's origin; the whole vehicle factory certificate of conformity for domestically produced motor vehicles; proof of payment or tax exemption certificate for the motor vehicle purchase tax. Proof of compulsory motor vehicle traffic accident liability insurance; technical data file of the motor vehicle; "Motor Vehicle Registration, Transfer, Cancellation/Transfer Application Form," etc. 2. Proxy: If handled by an agent, the original and copy of the agent's identity certificate must also be submitted (if the agent is a unit, the original and copy of the handler's identity certificate must also be submitted), along with a written authorization from the motor vehicle owner.
5
2
Share

What to Do When a White Car's Paint Gets Scratched?

Solutions for scratches on a white car's paint: 1. Polishing: Polishing is only suitable for minor scratches. Moderate friction helps eliminate fine scratches, but excessive polishing can thin the paint and eventually wear it through. 2. Touch-up painting: For deeper scratches, if the area is small and you have good DIY skills, you can do the touch-up yourself. For larger scratches, it's recommended to visit a 4S shop for professional repair. Steps for touch-up painting: 1. Clean the scratch before repair, using 800-grit sandpaper and a sanding block to smooth the scratch. 2. If the scratch is deep, use filler to level it. 3. After the filler dries, use 800-grit sandpaper and a sanding block to smooth the scratch again, then wipe it clean with a towel. 4. Gently sand the surrounding area with 2000-grit sandpaper until it becomes matte, then clean it. 5. Use a cleaning pad to wipe around the scratch before applying touch-up paint, then spray with clear gloss varnish.
16
5
Share

Differences Between Haval H6 and M6

There are many differences between the Haval H6 and M6. The following introduces the distinctions between the two models: 1. Exterior: The Haval M6 features a bold and expressive design, while the Haval H6 offers two versions with red and blue logos. The red logo version embodies the luxurious and classic side of Haval, whereas the blue logo version showcases a cool and trendy style, primarily targeting younger consumers. 2. Powertrain: The Haval M6 is equipped with the older 1.5T turbocharged engine from the previous H6, whereas the all-new Haval H6 comes with the latest direct-injection turbocharged engine, available in 1.5T and 2.0T displacements. The 1.5T version also delivers significantly higher power output compared to the older 1.5T engine.
13
4
Share

How Long Should You Rest When Tires Are Hot to the Touch?

Tires that are hot to the touch need to rest for about an hour. Here is some related information: 1. Replacement Time: Tires should be replaced every 3 years. If a vehicle is driven 20,000 kilometers a year, consider replacing them in 2 to 3 years. If driven around 10,000 kilometers a year, replacement should be considered in 4 to 5 years. 2. Function: Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures while driving. Therefore, they must have relatively high load-bearing, traction, and cushioning performance. Additionally, they need to have high wear resistance and flexibility, as well as relatively low rolling resistance and heat generation. 3. Classification: Tires can be categorized by their use into: passenger car tires, light truck tires, truck and bus tires, construction machinery tires, off-road vehicle tires, and agricultural and forestry machinery tires.
19
2
Share

What are the techniques for smooth clutch and throttle coordination without jerking?

When starting: You need to press the clutch and brake pedals all the way down, then slowly release the clutch. When shifting gears: Release the brake, press the clutch all the way down, and after completing the gear shift, lift the clutch at a steady speed (except for first gear). When decelerating or braking: Press both the clutch and brake pedals together until the vehicle gradually comes to a stop. Then shift to neutral, engage the handbrake, and release both the clutch and brake simultaneously. The clutch states are as follows: Free travel: When you initially press the clutch, there is a small play in the clutch pedal, known as the linkage state. During this time, the power between the engine and the transmission is not disconnected, so no operations other than pressing the accelerator can be performed. Semi-engagement: When the clutch is pressed down a certain distance, it enters a semi-engaged state, meaning only about half of the engine's power is transmitted to the transmission. The semi-engaged state is primarily used when starting, and it is also the reason many beginners often stall when first driving a manual transmission car.
10
0
Share

Is a midsize car a B-segment car?

b-segment cars are mid-range sedans. Here are the specific details about B-segment cars: 1. Definition: B-segment cars, also known as midsize cars or Large-Family-Cars, typically have a wheelbase ranging from 2.7 to 3.0 meters, a body length between 4.5 and 5.0 meters, and an engine displacement generally from 1.6 to 2.4 liters. 2. Classification basis: The classification is primarily based on parameters such as wheelbase, engine displacement, and weight. The further the letter in the alphabet, the longer the wheelbase, the larger the displacement and weight, and the higher the luxury level of the car. 3. Leading brands: Leading Chinese domestic B-segment car brands include BYD Surui, Geely Emgrand EC8, Borui, and Besturn B70, which excel in factors such as price, quality, technology, features, configuration, handling, power, and after-sales service.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.