···
Log in / Register

What is required for vehicle annual inspection without going through the inspection line?

3 Answers
DiCarson
07/29/25 7:37am
What procedures are needed for vehicle inspection without going through the inspection line: Exempt vehicles only need to apply for an inspection compliance mark from the public security traffic management department once every two years to operate normally. Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle annual inspection can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Regarding vehicle annual inspection, relevant regulations are stipulated in documents such as the "Road Traffic Safety Law Implementation Regulations." Before the inspection, some preparatory work is required (such as knowing relevant information, online appointments, procedures, and issues to note for the vehicle) to ensure a smooth and normal passage. There are initial and regular annual inspections, as well as some related policies. Annual inspection is legally required, meaning it is mandatory, and every vehicle on the road must undergo it. To facilitate vehicle owners, the government has introduced a six-year exemption policy, allowing new vehicles that meet the six-year inspection requirements to be exempt from annual inspection each year.
Was this review help?
16
2
Share
SanCatherine
08/13/25 1:37am
I've been driving for over a decade, and the new policy exempting vehicles from on-site inspection for annual review is really convenient. According to government regulations, non-commercial passenger cars under six years old don't need on-site inspection—just apply for the inspection label directly. The documents you need to bring are simple: the original and a copy of the vehicle registration certificate, the original valid compulsory traffic insurance policy, and the original and a copy of the owner's ID card. I usually go to the DMV counter with these documents, and the staff will verify them and issue the inspection label on the spot. If you're too lazy to go out, you can upload photos and complete the process on the Traffic Management 12123 app in just a few minutes. However, make sure the insurance is valid and all traffic violations are cleared first. This policy reduces congestion at inspection stations and makes life easier for car owners. But I never slack off—I insist on annual maintenance and brake system checks at the 4S shop. Safety always comes first. Exemption from on-site inspection doesn't mean lowering your guard. I think this is the trend, promoting digital management.
Was this review help?
4
3
Share
Expand All
DiCecilia
10/04/25 8:09am
Well, I bought my car the year before last, and it's just been three years, so it doesn't need an on-site inspection. For the annual inspection, just prepare the vehicle license, compulsory traffic insurance policy, and personal ID card—no on-site check required. I prefer using a mobile app to handle it. Open the Traffic Management 12123 app, upload photos of these documents, and once the system automatically approves them, the electronic mark becomes valid. If there's a hiccup online, just visit the vehicle management office in person. Bring all the documents, and it’ll be done in about ten minutes of queuing. Don’t forget the insurance must be up to date—if it’s expired, your application will be rejected. I learned that the hard way. This policy is quite practical, avoiding long queues at inspection stations and saving time and effort. I guess it’s meant to encourage new car purchases. As an average driver, I find it convenient, but I still regularly check my car’s lights and tires to ensure there are no hidden issues.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

Is it allowed to temporarily park while driving a motor vehicle in a tunnel?

When driving a motor vehicle in a tunnel, temporary parking is not allowed. Motor vehicles are prohibited from parking at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations. Temporary parking of motor vehicles on the road should comply with the following regulations: 1. Parking is prohibited in sections with no-parking signs or markings, sections with isolation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, crosswalks, and construction areas; 2. Parking is prohibited at intersections, railway crossings, sharp turns, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations; 3. Parking is prohibited in front of bus stops, emergency stations, gas stations, fire hydrants, or fire stations (posts), and within 30 meters of these locations, except when using these facilities.
5
0
Share

Why is the spare tire pressure 420?

The spare tire pressure is 420 because the tire pressure during storage should be higher than the standard upper limit, but it should be adjusted to match the standard tire pressure of the original tires when in use. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear of the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass, the tire is more prone to punctures, leading to internal cracks, blowouts, and potential tire bursts. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, compromising driving safety; Increases movement of tire components, leading to excessive rolling and abnormal heat generation; Weakens the function of cords and rubber, causing delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction with the ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to tire bursts; Increases tire deformation, leading to sidewall cracks, flexing movements, excessive heat, rubber aging, cord fatigue, and breakage, while also enlarging the tire's contact area and accelerating shoulder wear.
3
2
Share

What Impact Does a Driver's Safe Driving Record Have?

Querying a driver's safe driving record serves to encourage safe driving practices. Below is expanded information regarding traffic violation handling: 1. Timeframe: Vehicle owners must address violations at the local traffic police station where the violation occurred. Failure to do so within 15 days will incur a late fee of 3% per day, although the total late fee will not exceed double the original fine amount. Early resolution helps avoid unnecessary penalties. 2. Verification method: The quickest and most effective way to confirm whether you have committed a violation is to inquire at the vehicle management office or traffic police station. Essential documents to bring include your driver's license, vehicle registration certificate, and ID card—all three are mandatory. It's also advisable to carry some cash, so that if a violation is found, you can promptly complete the necessary procedures.
7
2
Share

What grade of fuel should a normal car use?

Usually, the fuel grade label is marked on the fuel tank cap. The only criterion for selecting the gasoline grade is the compression ratio of the car engine. Generally, the higher the compression ratio, the higher the gasoline grade. Typically, when the compression ratio is between 7.5-8.0, 90-93 grade gasoline should be used; for a compression ratio of 8.0-8.5, 90-93 grade gasoline is suitable; when the compression ratio is 8.5-9.0, 93-95 grade gasoline should be selected; and for a compression ratio of 9.5-10.0, 95-97 grade gasoline is recommended. The manual clearly specifies which grade of gasoline to use. There is no mistake in following the manual's instructions. Generally, the higher the compression ratio, the higher the gasoline grade. However, a high compression ratio does not entirely mean that high-grade gasoline is required. With clever engineering, high-compression engines can also use lower-grade gasoline.
18
2
Share

Which is the Brake and Which is the Accelerator in a Motor Vehicle?

In a manual transmission vehicle, there are three pedals arranged from left to right: the first is the clutch, the second is the brake, and the third is the accelerator. The left foot controls the clutch, while the right foot controls the brake and accelerator. An automatic transmission vehicle has only two pedals, arranged from left to right: the brake pedal and the accelerator pedal, both controlled solely by the right foot. The brake system consists of brake calipers and brake pads installed on the wheel hubs, with a master brake cylinder installed in the driver's compartment. Brake cylinders can be hydraulic, pneumatic, or lever-type, and operating the master brake cylinder applies braking force to the moving vehicle. The accelerator controls the fuel injection volume of the engine. When the accelerator is pressed down, a larger fuel injection increases the engine speed, thereby making the vehicle move faster.
20
3
Share

Why is the Camry's daytime running light flickering?

Possible reasons for the flickering of the Camry's daytime running light: it could be due to poor contact between the fuse and the headlight plug, or poor connection between the cathode power supply and the wiring harness with the frame. The daytime running light automatically turns on after the vehicle is started and remains lit in any position of the light switch, with no option for manual shutdown. The purpose of daytime running lights is to make the vehicle more easily recognizable during daytime driving. The Camry has a length of 4885mm, width of 1840mm, height of 1455mm, and a wheelbase of 2825mm. In terms of exterior design, the Camry features a large trapezoidal horizontal grille, a streamlined body posture with a lower waistline, an extended roofline that increases rear headroom, and a dual-sided quad-exhaust design at the rear.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.