What is required for the replacement of a vehicle license?

2 Answers
DelColton
09/04/25 6:58am
The documents required for replacing a vehicle license include: Application Form for Replacement of Motor Vehicle License Plates/Certificates, original and photocopy of the vehicle owner's ID, original and duplicate of the motor vehicle driving license, three one-inch digital color photos of the driver with white background, and the driver's physical condition certificate. The timeframe for replacing a vehicle license: It must be done within three months in advance, i.e., within 90 days before the motor vehicle inspection. For vehicles not exempt from inspection, the owner needs to bring a letter of authorization, the vehicle license, and the compulsory traffic insurance policy to the local motor vehicle inspection station for inspection. Upon passing the inspection, it is no longer necessary to apply for an inspection compliance mark; it can be directly noted on the supplementary page of the vehicle license. For vehicles exempt from inspection within six years, the traffic management department does not need to inspect the vehicle but only needs to review the inspection application form, vehicle license, compulsory traffic insurance certificate, and vehicle and vessel tax certificate. The regulatory authorities will also check the vehicle's violation records. Upon passing the inspection, an inspection mark will be issued and noted on the supplementary page of the vehicle license.
Was this review help?
14
5
Share
SanKennedy
09/16/25 7:50am
I'm quite experienced with renewing the driving license, having been a driver for over ten years. You need to bring your original ID card and a copy, the vehicle registration certificate, and standard photos of the vehicle, which can usually be taken on-site. If the driving license is lost or damaged, you'll need to fill out a loss declaration form. Go to the local vehicle management office to handle it; weekdays are less crowded, so avoid peak hours. The cost is around 50 yuan, and don't forget to bring the vehicle and vessel tax certificate and insurance policy, just in case. The whole process is simple—fill out the forms and wait about ten minutes. The key is not to delay; you'll be fined if it expires. I recommend handling it a month early for safety on the road. Also, bring water if it's hot, as you might have to wait in line.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

Is Vehicle Inspection Open During National Day Holiday?

Vehicle inspection is not open during National Day holiday Required Documents: Bring your driver's license, ID card, vehicle registration certificate, and the current valid compulsory traffic insurance policy. Drive the vehicle to the vehicle management office or motor vehicle inspection station. If someone is acting as an agent, the agent must bring their driver's license and ID card. Filling Out the Application Form: Go to the vehicle management office to fill out the motor vehicle annual inspection application. Then submit the form and all other materials to the staff and pay the inspection fee. Preparing for External Inspection: After payment, proceed to the external inspection area where staff will check the vehicle's appearance. Prepare a fire extinguisher and warning triangle. Once the external inspection is completed, proceed immediately to the on-line inspection.
3
2
Share

What is the normal current for a car battery?

Car battery current is considered normal when it reaches 300-400A. Factors determining current size: The current size depends on the number of electrical appliances in use. For example, just turning on an interior light might consume about 0.3A. Factors affecting battery working current: The working current of a battery depends on its model, i.e., capacity, which is usually labeled on the casing. The higher the working current, the shorter the duration. For instance, a 20Ah battery discharging at 2 amps can last for 10 hours before needing a recharge. The instantaneous maximum current can reach 70 to 100 amps or even higher. However, it's important to note that excessively high currents can lead to problems, including the risk of battery explosion.
19
2
Share

What does the master warning light mean?

The master warning light may indicate the following issues: overheating of the dry dual-clutch transmission clutch; fuel cutoff system intervention or malfunction; parking sensor failure; external light failure; engine oil pressure sensor failure; traction control system warning or malfunction. Triangle with an exclamation mark inside: A triangle with an exclamation mark inside is a general fault indicator light, mainly indicating issues such as overheating of the dry dual-clutch transmission clutch, fuel cutoff system intervention or malfunction, parking sensor failure, external light failure, engine oil pressure sensor failure, or traction control system warning or malfunction. Circle with parentheses and an exclamation mark inside: This is the brake system warning light. It typically lights up for a few seconds when the ignition is turned on and turns off after the engine starts. It lights up when the handbrake is engaged and turns off when released. It also lights up when the brake fluid level is too low or when there is a malfunction in the brake system while driving. Horizontal line with parentheses and an exclamation mark below: This is the tire pressure monitoring warning light. It lights up when the pressure in one of the vehicle's tires is too low.
14
4
Share

How to Check China 6a or China 6b?

To determine whether a vehicle complies with China 6a or China 6b standards, you can check the relevant information on the vehicle's certificate of conformity or the environmental protection information list provided with the vehicle. Alternatively, you can use specialized websites for verification. Check the Certificate of Conformity: The vehicle's certificate of conformity contains key information, including the emission standard the vehicle complies with. Check the Environmental Protection List: Review the environmental protection information list provided with the vehicle when purchasing through official channels. The first section of this list includes details about the vehicle's emission stage, clearly indicating the emission standard of the model. Query via Specialized Websites: Use specialized websites to verify the emission standard. After identifying the specific model you intend to purchase, locate the vehicle identification numbers, such as the engine number and chassis number. Then, visit the official vehicle environmental protection website and enter these numbers to access the vehicle's environmental protection information, including the applicable emission standard.
20
1
Share

Can You Add Tap Water to a Car's Radiator?

You should not add tap water to a car's radiator. Correct Practice: When replenishing or replacing coolant, you should use coolant instead of water as a substitute. Of course, if you are driving and notice that the car's temperature gauge is running too high and you cannot find coolant immediately, you can temporarily use some bottled purified water as a stopgap measure. This is acceptable for a short period, but you should replace it with coolant as soon as possible. Boiling Point of Coolant: The boiling point of coolant is above 120 degrees Celsius, while water boils at only 100 degrees Celsius. Using coolant prevents your car from "overheating" in the summer. Effects of Using Water Instead of Coolant: Using water instead of coolant can lead to the formation of scale, requiring frequent replacement, whereas coolant does not have this issue. Impact of Water on the Cooling System: Water can cause some corrosion to the cooling system, while coolant contains additives that prevent corrosion and rust. Therefore, to maintain your most fuel-efficient family car, you should use coolant in the summer and never substitute it with tap water.
17
4
Share

What Causes the Mismatch Between Speed and Gear?

Speed is controlled by the accelerator pedal, while gears are selected manually. A mismatch between vehicle speed and gear refers to a lack of coordination in operation. Low speed should correspond to low gear, medium speed to medium gear, and high speed to high gear. Gear shifting should be based on the vehicle's speed and the speedometer. Key points to note: 1. Use low gear at low speeds. The clutch provides more 'power,' making it easier to start and climb slopes; however, even with full throttle, low gear won't increase speed—it only consumes more fuel. 2. Use high gear at high speeds. The clutch's 'gear ratio' is higher, allowing for faster operation; but high gear offers less power, making the engine prone to stalling when encountering resistance or braking. Therefore, it's essential to match the vehicle's speed with the appropriate gear.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.