What is replaced during a car's first maintenance?

1 Answers
DeFaith
07/25/25 4:02pm
During a car's first maintenance, the engine oil and oil filter are replaced. Additionally, the coolant level is checked to ensure it meets specifications, and the brake and clutch fluid levels are inspected. The first maintenance must be performed within 5,000 kilometers or six months of driving the car. Generally, it is suitable to perform the first maintenance when the car has been driven between 4,000 and 5,000 kilometers, but the car should not exceed six months of use. The period before the first maintenance is the vehicle's break-in period. During this time, as the engine gradually breaks in, contaminants such as dust, metal wear, and carbon deposits will continuously mix into the engine oil. It is not recommended to drive at high speeds during the break-in period because the oil contains too many impurities, which can lead to abnormal engine wear if high speeds are maintained.
Was this review help?
6
0
Share
More Forum Discussions

Will the airbag deploy if two wires touch each other?

The airbag will deploy if the positive and negative wires come into contact and short-circuit while powered. Below is additional information: 1. Working Principle: The airbag control module is usually located in front of or beneath the gear lever. Areas marked with AIRBAG indicate the presence of an airbag. Use a diagnostic tool to check for faults in the airbag system and repair them accordingly. If no faults are detected, the tool can directly clear any error codes. 2. Function: The airbag ECU serves as the core component of the entire airbag system. The crash sensor detects collisions through inertia, while the pressure sensor checks for sudden door deformation to determine whether to deploy the airbag. The airbag switch deactivates the passenger-side airbag, and the seat occupancy sensor detects the presence of a passenger. 3. Precautions: Control strategies vary by vehicle model. Some models are configured based on trim levels, while others, like certain German models, require online coding based on long or short codes. Additionally, some airbag control modules contain a yaw rate sensor; if not calibrated, it may trigger the skid warning light.
19
1
Share

Where is the car alarm switch located?

Wired car anti-theft alarms can generally be considered for installation under the dashboard or under the driver's seat. If only the positioning function is installed, many locations such as the roof light, side doors, and taillights can also be considered. Below is additional information: 1. Installation location: Wired car anti-theft alarms need to be connected to the vehicle's power supply circuit, so thieves can trace the power supply lines to find and remove the GPS tracker. If other functions are also installed, the location of the tracker can be largely determined. 2. Anti-theft effect: There is no need to worry about the GPS tracker failing to perform its normal anti-theft function. With the vibration alarm feature installed, if the thief does not start the vehicle with the car key within a certain period after opening the door, the GPS tracker will send a vibration alarm via SMS and phone calls to the owner, achieving real-time anti-theft effects.
17
0
Share

How many more years can a 2016 retired vehicle be driven?

A vehicle retired in 2016 can still be driven for 8 years. The operational period for retired vehicles is 8 years. Below are detailed explanations regarding automobile driving: 1. Overview: Automobile driving is one of the fundamental skills modern individuals should master. To acquire driving skills, one must meet the required age and physical conditions, and undergo training and examinations on road traffic safety laws and regulations, basic automotive mechanical knowledge, and safe driving practices. 2. Additional Information: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formalized procedure that must be conducted by an authorized agency.
13
1
Share

What are the benefits of soundproofing car door panels?

Soundproofing car door panels offers the following benefits: 1. Noise reduction: After soundproofing the doors, the inner cavities are effectively filled, giving a premium car's solid feel. It effectively blocks external noise from entering the cabin and significantly improves the sound quality of the original car audio system. If combined with four-door or full-vehicle sealing, the enhancement in audio performance will be more noticeable. Additionally, it effectively increases the vehicle's airtightness and dustproof capability while reducing wind noise during driving. 2. Thermal insulation: Utilizing the heat insulation properties of soundproofing materials, roof soundproofing not only blocks the sound of raindrops during rain but also, when combined with soundproofing materials on the chassis and four doors, effectively shields against the intense summer sun, maintaining the interior's cool temperature. In winter, it also helps slow down the dissipation of interior heat.
11
0
Share

What is PVC on a car?

Automotive instrument PVC refers to the instrument panel made of PVC material in a car. Below is relevant information: 1. PVC: PVC is the abbreviation for polyvinyl chloride material, which is primarily composed of polyvinyl chloride resin with the addition of appropriate amounts of anti-aging agents, modifiers, etc. It is processed through mixing, calendering, vacuum forming, and other techniques. 2. Characteristics: PVC material is lightweight, heat-insulating, thermal-insulating, moisture-proof, flame-retardant, and easy to construct. It comes in various specifications, colors, and patterns, making it highly decorative. It can be used for interior wall and ceiling decorations and is one of the most widely used decorative materials among plastic materials. 3. Advantages: It is lightweight, heat-insulating, thermal-insulating, moisture-proof, flame-retardant, acid and alkali-resistant, and corrosion-resistant. It has good stability and dielectric properties, is durable, anti-aging, and easy to weld and bond. It has strong bending strength and impact toughness, with high elongation at break. It can be easily processed into various shapes through kneading, mixing, sheeting, pelletizing, extrusion, or die-casting, meeting the needs of various profile specifications.
4
3
Share

Can a 15A fuse be replaced with a 20A one? Will it have any impact?

Replacing a 15A fuse with a 20A one will have consequences. Here are the relevant details: 1. Introduction: A 15A automotive fuse can supply 12V current. A 15A automotive fuse means the fuse can handle up to 12V voltage, with a maximum power consumption of 180W for electrical appliances. For 24V systems, it means the fuse can handle up to 24V voltage, with a maximum power consumption of 120W for electrical appliances. 2. Precautions: When replacing a fuse, always choose the correct amperage rating. Do not arbitrarily increase the current specification of the fuse, and never use an iron wire as a substitute.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.