What is Rear Side Privacy Glass?

Why is the ABS warning light on in the Delong X3000?

When the car displays ABS, it means there is a fault in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, which poses significant safety risks. There are several states in which the ABS light may illuminate, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed or the wheel's slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases and voltage rises, the ABS indicator turns off. This can also occur if the ABS system's power supply voltage is too low, such as due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and verify the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine startup and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connectors. Replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage fully downward. Release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary.

14

1

Share

Do the Import Vehicle Customs Declaration and the Vehicle Not Arrive Together?

Import Vehicle Customs Declaration and the vehicle do not arrive together. Time to Receive the Import Vehicle Customs Declaration: The import vehicle customs declaration takes approximately 10 working days. From the start of customs declaration to the issuance of the customs declaration, it takes about 10 working days. When purchasing a parallel import vehicle, it is essential to confirm that the customs declaration, inspection certificate, conformity certificate, and other relevant vehicle documents are complete before proceeding with the purchase transaction. Import Vehicle: After arriving at the port, the customs declaration process takes about a month to complete. The vehicle can then become available for sale and can be cleared through customs. The customs declaration is issued about half a month after the completion of the customs process, and the inspection certificate is issued another half a month later.

3

5

Share

Can traffic violations be handled after one year?

Traffic violations cannot be handled after one year, as late fees will be imposed, and long-term non-compliance may lead to enforcement actions. Below are the time limits and regulations for handling traffic violations: Processing time: According to traffic laws, after a vehicle commits a violation, it generally takes 3-7 days to be queried online or receive an SMS notification, with a maximum delay of no more than 13 working days. The vehicle owner must report to the local traffic police station to handle the violation within 15 days of the violation. Regulations for handling violations: As per current regulations, clearing points requires pre-binding between the person and the vehicle. One person can bind a maximum of 5 vehicles, and one vehicle can be bound to a maximum of 3 drivers. If no binding is done, online processing of violations is not possible, and the violation must be handled at a traffic violation processing window.

9

2

Share

Does Transport Mode Affect the Car?

Transport mode does not affect the car. Transport mode is activated during the process of transporting the car from the manufacturer to the 4S dealership, which cuts off power to the vehicle's electrical systems to prevent battery discharge. Below are the methods for activating or deactivating transport mode and its functions: Methods to Activate or Deactivate Transport Mode: Carry the key into the car, do not press the brake pedal, and press the start button—the car will not ignite; press the brake pedal five times, press the hazard light button twice; press the start button once to turn off the engine; press and hold the brake pedal and press the start button to start the car, successfully activating or deactivating the mode. Functions of Transport Mode: When the transport mode switch is disconnected, the body control module cannot detect a high-level signal, determining that the vehicle is in transport mode. If the entire vehicle network is awake or the key is not in the OFF position, the body control module controls the relay to engage, allowing the vehicle to operate normally. After the entire vehicle network enters sleep mode or the vehicle remains in the OFF position for more than 10 seconds, the body control module outputs a low-level signal, disconnecting the relay to reduce the vehicle's static current consumption.

12

4

Share

How many colors does the new Sylphy have?

The new Sylphy offers a total of 6 body colors, which are Mocha Brown, Onyx Black, Moonlight Silver, Pearl White, Titanium Gold, and Tungsten Gray. Below is relevant information: 1. The Sylphy is a compact car launched by Nissan, which has undergone significant changes in its appearance after a complete redesign. The exterior of the Nissan Sylphy adopts the new Vmotion design language, featuring a large front grille with chrome trim accents. 2. In terms of dimensions, the car measures 4641*1815*1450mm in length, width, and height, with a wheelbase of 2721mm. After the redesign, the interior space has been greatly improved, especially the rear seating area. The powertrain continues to feature a 1.6L naturally aspirated engine, paired with a CVT transmission.

3

0

Share

Does Using Cruise Control Consume More Fuel?

If the route with cruise control activated includes uphill and downhill sections or changes in wind speed, using cruise control will consume more fuel compared to maintaining a constant throttle. However, in driving conditions involving rapid acceleration or deceleration, cruise control is more fuel-efficient. Here are more details about using cruise control: 1. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. Once the pedal is released, the system will restore the vehicle speed to the set cruise speed. If the speed exceeds the cruise speed by more than 10 km/h and maintains this speed for over 5 minutes, the cruise speed must be reset. 2. To decrease the cruise speed, press the "SET" button, which reduces the speed by 1.5 km/h. If the button is held down, the car will continue to decelerate. Once released, the current speed will be stored in the memory.

13

5

Share

What is Rear Side Privacy Glass?

Why is the ABS warning light on in the Delong X3000?

Do the Import Vehicle Customs Declaration and the Vehicle Not Arrive Together?

Can traffic violations be handled after one year?

Does Transport Mode Affect the Car?

How many colors does the new Sylphy have?

Does Using Cruise Control Consume More Fuel?

What is the lifespan of a carbon fiber frame?

What kind of oil should be used in a vacuum packaging machine?

Is a Non-Passable Charcoal Canister Solenoid Valve Considered Good?

What is the suitable tire pressure for 19-inch low-profile tires?