What is Putty-Free Sheet Metal Repair?

How to turn on the fog lights on the Roewe RX5?

Method to turn on the fog lights on the Roewe RX5: When the ignition switch is in the ON position and the position lights are turned on, rotate the fog light switch one notch to turn on the front fog lights. When the front fog lights are on, the front fog light indicator on the instrument panel will illuminate. When the headlights or front fog lights are on, rotate the fog light switch one more notch to turn on the rear fog lights. Release the fog light switch to return it to the previous position. The Roewe RX5 adopts Blue Core high-efficiency power technology, equipped with a 2.0T and a 1.5T in-cylinder direct injection turbocharged engine. The 2.0T engine has a maximum power of 220 horsepower and a peak torque of 350 Nm, while the 1.5T engine has a maximum power of 169 horsepower and a peak torque of 250 Nm. The Roewe RX5 features Porsche-tuned chassis, GKN intelligent all-wheel drive system shared with Land Rover, full independent suspension system, and four-way full-speed CANBUS system bus, comprehensively enhancing the driving and riding quality.

8

4

Share

What is the reason for the fuel pump not making noise after the diesel heater is turned on?

There are several reasons why the fuel pump does not make noise after the diesel heater is turned on: Air in the fuel line: If there is air in the fuel line, it is necessary to wait until the fuel in the tank is exhausted. When the engine starts, it cannot ignite, so the fuel pump does not make noise. This is because the diesel fuel pump only operates when the engine starts. In this case, the hand fuel pump should be used to pump fuel from the tank into the fuel line. Severely worn fuel outlet valve: Replace the severely worn fuel outlet valve with a high-quality one. Some car owners may not be fully aware that diesel fuel contains some mechanical impurities. These impurities can cause certain wear to the fuel outlet valve during flow. When the fuel outlet valve is severely worn, the high-pressure fuel pipe will experience insufficient pressure. Replacing the worn plunger sleeve can restore the fuel injection pump to normal operation. Additionally, diesel fuel has a certain corrosive effect, which can increase the gap between the plunger and the sleeve during flow.

15

5

Share

How Many Cylinders Does the Sagitar Engine Have?

The Sagitar is equipped with a four-cylinder engine. This model features two engine options: a 1.2T turbocharged engine and a 1.4T turbocharged engine. The 1.2T turbocharged engine is paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission, while the 1.4T turbocharged engine is matched with a 7-speed dual-clutch transmission. The Sagitar is a compact family sedan under the Volkswagen brand, with body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, and a wheelbase of 2731mm. The Sagitar comes standard with an electronic parking system across all trims, and higher-end models offer a 10-color ambient lighting system that can switch between economy, comfort, and sport modes. In terms of active safety, the top and second-top trims of the Sagitar are equipped with an advanced pre-collision system and optional features such as lane keeping, blind spot monitoring, and ACC adaptive cruise control.

14

3

Share

What is the difference between avant and allroad?

avant and allroad have differences in appearance, equipment, and price. The details are as follows: Appearance differences: From the exterior, the Avant is a traditional sedan, while the Allroad is equipped with off-road kits, including black wheel arches, side skirts, roof racks, etc. Additionally, the Allroad features an air suspension system that, when raised to its highest setting, provides ground clearance comparable to SUV models, offering better off-road capability. Equipment differences: The Avant is equipped with a 2.0T low-power and high-power four-cylinder engine, with 0-100 km/h acceleration times of 8.4 seconds and 7 seconds respectively, indicating a relatively modest power reserve. The Allroad, on the other hand, is powered by a 3.0T V6 engine, delivering impressive parameters of 340 horsepower and 500 N/m, with a 0-100 km/h acceleration time of just 5.3 seconds, showcasing much stronger performance. Furthermore, the Avant does not have a four-wheel-drive system and is front-wheel-drive only, while the Allroad comes with the quattro all-wheel-drive system. Price differences: The higher specifications also make the Allroad more expensive than the Avant.

2

1

Share

What is the solution for abnormal noise when opening the sunroof?

The solutions for abnormal noise when opening the sunroof are: 1. Replace the sunroof rubber seal; 2. Tighten the sunroof screws; 3. Remove dust from the sunroof with a towel and perform regular maintenance; 4. Apply lubricant to the sunroof. Causes of abnormal noise in the car sunroof: 1. Aging of the sunroof rubber seal or sealing ring; 2. Loose sunroof screws; 3. Presence of dust particles in the sunroof sliding track; 4. Wear of the sunroof frame; 5. Lack of lubrication in the sunroof. Precautions for using the sunroof: 1. During car washing, avoid directing the high-pressure water jet directly at the sealing ring; 2. Do not open the sunroof on bumpy roads to prevent component deformation or motor damage due to excessive vibration between the sunroof and the sliding track; 3. It is strictly prohibited to open the sunroof during rain or when cleaning the vehicle.

20

2

Share

What is the reason for the 02796122 fatigue driving reminder?

02796122 reminds of fatigue driving for the following reasons: Excessive driving duration: There are fatigue driving monitoring systems on highways. If it is detected that the continuous driving time exceeds the specified duration, an alarm will be triggered, and a phone call reminder will be sent. The commonly equipped fatigue monitoring system is called the "Fatigue Driving Warning System". It is based on the driver's physiological image response and consists of two main modules: ECU and camera. By utilizing the driver's facial features, eye signals, head movements, etc., it infers the driver's fatigue state and issues alarm prompts while taking corresponding measures. This provides active and intelligent safety protection for drivers and passengers. Vehicle entering a relaxed state: The system will be activated when the vehicle enters straight and flat roads that easily make the driver relaxed, environments that may cause distraction or drowsiness, or when the vehicle speed exceeds 65 km/h. The Driver Alert System consists of a camera, several sensors, and a control unit. The camera is installed between the windshield and the interior rearview mirror, continuously measuring the distance between the vehicle and lane markings, monitoring the vehicle's travel path through signals from the digital camera and data on steering wheel movements.

1

Share

What is Putty-Free Sheet Metal Repair?

How to turn on the fog lights on the Roewe RX5?

What is the reason for the fuel pump not making noise after the diesel heater is turned on?

How Many Cylinders Does the Sagitar Engine Have?

What is the difference between avant and allroad?

What is the solution for abnormal noise when opening the sunroof?

What is the reason for the 02796122 fatigue driving reminder?

What are the reasons for the scattered light of Nissan Teana headlights?

Does a newly purchased car need antifreeze?

How to Calculate Safe Distance?

Can New Energy Vehicles Last for 10 Years?