What is Nissan Skyline called in China?

How to Disassemble the Brake Disc of Nissan Teana?

The disassembly methods for the brake disc of Nissan Teana mainly include the following steps: First: Check the wear degree of the brake disc. During normal maintenance, the brake disc does not necessarily need to be replaced. Whether to replace the brake disc should be judged based on the actual situation. If there are grooves exceeding 3MM on the brake disc, the brake disc can be replaced. Second: Remove the front wheel tires. To replace the brake disc, the two front wheel tires must be removed, and the round disc visible is the car's brake disc. Third: Remove the fixing screws of the brake caliper. The brake disc is installed on the front wheel bearing, and the outside is fixed by the brake caliper. Remove the two 18 screws on the brake caliper and take off the brake caliper. Since the brake caliper is connected with oil pipes, it should be slowly lowered to prevent the oil pipes from breaking. Fourth: Remove the old brake disc. The old brake disc is installed on the front wheel bearing, and rust may form between the bearing and the brake disc. At this time, you can use a hammer to tap from the back of the brake disc while rotating the brake disc to ensure all sides of the brake disc are tapped. After several taps, the old brake disc can be removed.

7

2

Share

How to Drive a Volkswagen with Tiptronic Transmission?

To drive a Volkswagen with Tiptronic transmission, follow these steps: 1. Press the brake pedal and pull the gear lever downward to engage the drive (D) position. 2. Push the gear lever to the right to enter manual mode. 3. When shifting gears, push the lever forward to upshift and pull it backward to downshift. 4. Note that you cannot upshift if the vehicle speed and engine RPM are insufficient, as gear changes require approval from the transmission control unit. Generally, automatic transmission vehicles have the following gear positions: P, R, N, D, and S: 1. P (Parking) - The gear lever must be in P position when parking the vehicle. 2. R (Reverse) - Used for reversing. 3. N (Neutral) - Equivalent to neutral, used when starting the engine, temporary stops with the driver remaining in the vehicle, or during towing. 4. D (Drive) - For normal driving, place the gear lever in D position, allowing the vehicle to automatically shift between forward gears. D is the most commonly used position. 5. S (Sport) - Activates the vehicle's sport mode. In S mode, the transmission can shift freely but delays shifting to keep the engine at higher RPMs for extended periods, allowing the vehicle to maintain lower gears at higher speeds for increased torque output and acceleration.

7

4

Share

What is the purpose of adjusting valve clearance in a car engine?

The purpose of adjusting valve clearance in a car engine is to compensate for the thermal expansion of the valves. When the engine is running, the valves expand due to the increase in temperature. If there is no gap or the gap is too small between the valves and their transmission components in the cold state, the thermal expansion of the valves and their transmission components will inevitably cause the valves to not close tightly in the hot state. Valve clearance is divided into cold clearance and hot clearance. Hot clearance is slightly smaller than cold clearance, and the clearance measured in the cold state of the engine is the cold clearance. Generally, the cold clearance of the intake valve is between 0.08 to 0.10 millimeters, and the cold clearance of the exhaust valve is around 0.10 to 0.12 millimeters. Adjustment should be strictly carried out according to the clearance specified in the manual. The inspection and adjustment of valve clearance must be performed when both the intake and exhaust valves are completely closed. When the piston is at the top dead center of the compression stroke, the intake and exhaust valves are exactly completely closed, so the valve clearance must be adjusted when it is at the top dead center. The adjustment of valve clearance should be performed when the engine is in the cold state. It is strictly forbidden to adjust the clearance when the engine is running. For a twin-cylinder engine, inspection and adjustment should be carried out cylinder by cylinder.

20

3

Share

How to open the trunk from inside the Tayron?

The trunk switch of the Tayron is located on the door panel of the driver's side door. Press this switch to open the trunk lid. The functions of the car trunk are mainly reflected in the following aspects: 1. A fully equipped toolkit. The spare tire, jack, headlight tools, warning triangle, first aid kit, etc., in the trunk are generally standard equipment on cars, but many models are not fully equipped. In fact, the first aid kit and warning triangle should be included in these configurations, as they are related to driving safety and emergency assistance. 2. Luggage storage net. When driving, sometimes you may encounter the problem of small, scattered items or fragile items that cannot be placed properly. No matter how neatly they are arranged, you still have to rearrange them when getting off the car, and there is even a risk of them being damaged by bumps. With a luggage storage net in the trunk, these worries and unnecessary losses can be avoided. 3. Luggage compartment partition. Most hatchbacks, SUVs, and some MPV models have a partition in the trunk area, which is an original factory-installed accessory. After the vehicle leaves the factory, an installation position will be reserved in this area. With the partition in place, even without a rearview camera, you won't have to blindly reverse; in case of an emergency brake, it can prevent luggage from rushing into the cabin and causing harm to the occupants.

14

4

Share

How to Turn Off the Auto Start-Stop Function on Chevrolet Malibu XL?

The method to turn off the auto start-stop function on Malibu XL: Simply press the auto start-stop button, and the dashboard will display a prompt indicating the system is being turned off. Click to confirm the shutdown. Scenarios where turning off the auto start-stop is recommended: 1. When driving on steep slopes, it is advisable to avoid using the auto start-stop function. Although the engine stop duration is brief, the start-stop operation on a slope may lead to insufficient braking assistance. 2. During extremely hot weather in southern regions when the air conditioning is running at full capacity, it is best to disable the auto start-stop function. The air conditioning system requires significant power, and the vehicle's electrical system may not provide enough power to sustain the air conditioning when the engine is off, resulting in discomfort for passengers. 3. When driving through water, it is highly recommended to turn off the auto start-stop system. This prevents the engine from shutting down while the vehicle is in motion, which could cause a sudden drop in exhaust pressure. Water may then flow back into the engine through the exhaust pipe, potentially preventing the engine from restarting. 4. In cases of severe traffic congestion, disabling the auto start-stop function is also suggested. Prolonged engine shutdowns can lower the combustion chamber temperature, leading to the formation of carbon deposits from unburned hydrocarbons and paraffin on the cylinder walls. These deposits can increase fuel consumption and reduce engine power, counteracting the fuel-saving purpose of the auto start-stop feature.

11

3

Share

What are the reasons for the absence of input from the uneven road surface sensing system?

The reasons for the absence of input from the uneven road surface sensing system include faults in the vehicle's tilt sensor and poor line contact. The specific causes and solutions are as follows: Tilt sensor failure: Tilt sensor failure is the primary link in achieving automatic detection and control. If it malfunctions, the phenomenon of the sensing system input being absent will occur. The solution is to repair the tilt sensor. Poor line contact: Check whether the sensor plug is properly connected. Short circuits or poor contact in the lines can also cause the absence of input from the uneven road surface sensing system. The solution is to inspect the lines and carry out repairs.

4

1

Share

What is Nissan Skyline called in China?

How to Disassemble the Brake Disc of Nissan Teana?

How to Drive a Volkswagen with Tiptronic Transmission?

What is the purpose of adjusting valve clearance in a car engine?

How to open the trunk from inside the Tayron?

How to Turn Off the Auto Start-Stop Function on Chevrolet Malibu XL?

What are the reasons for the absence of input from the uneven road surface sensing system?

Where is the Bluetooth switch in the Buick Excelle?

How to Replace the Wiper Blades on the New X-Trail?

What brand of tires does the Toyota Corolla use?

Where is the power-off button for the car dash cam located?