What is New Energy Vehicle Maintenance Technology?

What does automatic parking mean?

"Automatic parking" refers to the automatic parking system that can autonomously perform steering movements during parking. The driver only needs to control the throttle, brake, and gear shifting, and the system can take over the steering wheel at any time to stop the system function. The following is an introduction to the automatic parking system: 1. Definition: The Electronic Control Unit (ECU) performs real-time environmental modeling based on sensor information, generates vehicle movement paths, and controls the vehicle to automatically move to the parking space without collision. 2. Usage method: The automatic parking assist system has several radar probes on the side of the car body that are not commonly seen in other models. These two radar probes use ultrasonic sensors to scan both sides of the road, automatically finding a suitable parking space by comparing the parking space and the vehicle length. Once a suitable position is found, the driver only needs to shift into reverse gear and use the brake to control the speed. The vehicle will automatically adjust the steering and park itself into the space. When it detects that the distance between obstacles in front and behind the car body exceeds 1.5m, it can easily perform automatic parking without any adjustment of the car body. The minimum spacing required for its operation is 40cm, which is also the minimum spacing generally required for manual parking.

12

0

Share

What is the function of damping sheets?

Here is a detailed introduction to the functions of damping sheets: 1. Damping sheets can reduce the resonance amplitude of mechanical structures. They help prevent structural damage caused by dynamic forces reaching their limits. 2. Damping sheets provide stabilization. After a mechanical system experiences instantaneous impact, damping sheets assist in restoring it to a stable state. 3. Damping sheets can reduce mechanical noise. They decrease sound radiation caused by mechanical vibrations, thereby lowering mechanical noise. 4. Damping sheets offer seismic resistance and dynamic stability. They provide high seismic resistance and dynamic stability for various precision instruments, thereby improving the processing accuracy, measurement accuracy, and operational precision of machine tools, instruments, etc.

17

5

Share

Why does the new Santana dual-fuel vehicle suddenly fail to run on gas?

Dual-fuel vehicle cannot run on gas, possibly due to low gas pressure, and the power when running on gas is not as strong as when running on gasoline. Introduction to dual-fuel vehicles: Equipped with two sets of fuel supply systems, one supplying natural gas and the other supplying liquefied petroleum gas. The two fuel supply systems deliver fuel to the combustion chamber according to a predetermined ratio, where the fuels mix and burn inside the cylinder. Advantages of dual-fuel vehicles: Stable combustion without knocking, and easy cold and hot starts. The storage, transportation, decompression, and combustion of compressed natural gas are carried out under strict sealing conditions, making leakage unlikely. Additionally, the gas cylinders undergo various special destructive tests, ensuring safety and reliability. Compressed natural gas burns safely, produces less carbon deposits, reduces vapor lock and knocking, which helps extend the service life of various engine components, reduces the frequency of maintenance, and significantly lowers maintenance costs. It can also reduce the engine's oil consumption. Compared to gasoline, using compressed natural gas can significantly reduce emissions of carbon monoxide, sulfur dioxide, carbon dioxide, etc.

2

Share

What to Do If the Mitsubishi ASX Has High Fuel Consumption?

Here are some solutions for high fuel consumption in the Mitsubishi ASX: 1. Regularly clean the air filter to ensure the engine breathes fresh air and maintains smooth airflow in the intake system. 2. Periodically inspect and replace spark plugs in the ignition system, as a strong spark is essential for complete combustion of the air-fuel mixture. 3. The fuel system should also be cleaned regularly, as carbon buildup on the fuel injectors can cause needle valve leakage, leading to fuel wastage. 4. The engine should undergo periodic carbon deposit cleaning, as excessive buildup can disrupt accurate fuel control and increase fuel consumption.

15

2

Share

What Causes Difficulty in Cold Starting a Car Engine?

Here are the specific reasons for difficulty in cold starting a car: 1. Excessive carbon deposits leading to frequent malfunctions. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start the engine. Only when the carbon deposits become saturated with gasoline does the engine start more easily. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, making the air-fuel mixture too rich. This fluctuation between lean and rich mixtures causes the engine to idle roughly after a cold start. 2. Low engine temperature. When the engine temperature is too low, the fuel and lubricating oil do not reach the required temperature, so more fuel should be injected during cold starts to meet performance demands. Poor fuel atomization at low temperatures leads to reduced ignition energy, affecting performance and causing the car to shake. Aging ignition coils, spark plug high-voltage wires, or electrical leakage can also reduce ignition energy.

9

5

Share

What Causes the Odor When Turning on the Car Air Conditioner?

Mold growth and humid air are the causes of odors in the air conditioning system. The specific details are as follows: Humid Air: Due to prolonged lack of cleaning of the air filter, combined with humid air during rainy seasons, the air filter becomes damp and warm, leading to mold growth and a musty smell. Mold Growth: Outside air flowing through the air conditioning system ducts inevitably brings moisture and dust. Most of the moisture and dust are expelled from the vehicle through the air conditioning drain, but a small amount of residual moisture in the air conditioning ducts combines with dust from the air. If not cleaned for a long time, this can lead to mold growth, producing sour and rotten odors. Solutions: Regularly clean the air conditioning system or replace the air filter to reduce mold growth; master the correct method of turning the air conditioner on and off. It is generally best to turn off the air conditioning cooling 5 minutes before parking, then switch to natural air to allow the interior temperature to rise quickly. This prevents water condensation in the air conditioning ducts due to temperature differences after parking, keeping the ducts dry and blocking mold and fungus growth. Using natural "air fresheners," such as placing fruits like pineapple, lemon, or apple in the car, can help eliminate odors.

5

Share

What is New Energy Vehicle Maintenance Technology?

What does automatic parking mean?

What is the function of damping sheets?

Why does the new Santana dual-fuel vehicle suddenly fail to run on gas?

What to Do If the Mitsubishi ASX Has High Fuel Consumption?

What Causes Difficulty in Cold Starting a Car Engine?

What Causes the Odor When Turning on the Car Air Conditioner?

What car has two Cs stacked vertically as its logo?

Is Car Film Applied on the Outside or Inside?

What to Do When the F3 Central Locking System Doesn't Respond?

Is the Lynk & Co 03+ Fuel-Efficient?