What is Micro Coating?

1 Answers
StJeffrey
07/29/25 11:25pm
Micro Coating is a specialized protective product designed for use during car washing, which rapidly spreads into a micro-crystalline layer upon contact with water, hence the name "Micro Coating". Below is relevant information about Micro Coating: 1. Definition: Micro Coating is a specialized protective product designed for use during car washing, which rapidly spreads into a micro-crystalline layer upon contact with water, hence the name "Micro Coating". One application of Micro Coating provides the same protective effect as 15 days of traditional paint coating, while also effectively extending the duration of the paint coating's protection. A full car application of Micro Coating takes only eight minutes. 2. Function: It can be used on glass, rubber trim, and chrome-plated parts, making car windows clearer and providing a water-repellent effect. When driving at speeds of 60 KM/H or higher in rainy conditions, rainwater on the windows will be blown away by the wind to both sides, reducing the risk of traffic accidents. Additionally, it offers polishing, water-repellent, and anti-oxidation effects for rubber trim and chrome-plated parts.
Was this review help?
2
3
Share
More Forum Discussions

How to Open the Audi Fuel Tank Cap?

Audi fuel tank caps require manual opening. Here are some additional details: 1. The fuel tank cap is located on the right side, which is the passenger seat direction. If you want to refuel, you need to align the right side with the fuel dispenser. 2. Approach the fuel tank cap and press the front part of the tank, which is the side facing the rear of the car. 3. You need to manually remove the circuit board in the trunk and use the internal switch to open it manually. Due to the professional nature of this task, it is not recommended for car owners to attempt it themselves. It is advisable to visit a car repair shop and ask a technician to open it. 4. For the sensor lock, you need to place the key near the car and ensure the engine is off and the car is not locked to open the fuel tank cap.
9
2
Share

What Causes the Sound of Water Sloshing When Braking?

The reasons for hearing a water sloshing sound when applying the brakes are as follows: 1. The sound of circulating water from the water pump. This is a normal phenomenon. 2. Water inside the car. During rain, water can flow into the door through gaps in the glass. However, doors have drainage holes, so normally there shouldn't be any water. 3. Some car brands have a heater core inside the vehicle, and when the antifreeze level is low, a water flow sound may occur. 4. A vacuum booster pump is leaking air. 5. Water ingress in the right side rail. Clearing the drainage holes under the right side rail can resolve this issue. 6. It might be the sound of gasoline sloshing inside the fuel tank.
19
0
Share

How to Open the Hood of a Lexus UX?

To open the hood of a Lexus UX, simply lift it upward to a certain height by hand. Below are additional details: 1. The hood release lever of the Lexus UX is located on the lower panel on the driver's side. There is a pull handle; gently pull it, and the hood will make a clicking sound. 2. The hood is made of rubber foam and aluminum foil materials, which help reduce engine noise, isolate heat generated during engine operation, protect the paint surface on the hood, and prevent aging. 3. Beneath the hood lie crucial components of the vehicle, including the engine, electrical circuits, fuel system, braking system, and transmission system, all of which are vital to the vehicle. By enhancing the strength and construction of the hood, it effectively guards against adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates properly.
1
0
Share

Will adding windshield washer fluid to the antifreeze affect the car?

If a small amount of windshield washer fluid is added to the antifreeze, the impact is not significant. However, adding a large amount can cause malfunctions. This is because windshield washer fluid lowers the boiling point of the antifreeze, preventing the engine from cooling effectively. Precautions for mixing antifreeze: Always use the same brand of antifreeze. Different brands of antifreeze may have varying production formulas, and mixing them could lead to chemical reactions between additives, rendering them ineffective. The key indicators of antifreeze are its freezing and boiling points. Market-available antifreeze comes in freezing points such as -15°C, -25°C, -30°C, and -40°C. It is generally advisable to choose an antifreeze with a freezing point at least 10°C lower than the lowest temperature in your region. Functions of antifreeze: Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. The main components of antifreeze are: 50% purified water, 40% methanol, and 10% other substances.
20
4
Share

Should You Press the Clutch or Brake First When Braking?

It depends on the specific situation. Clutch before brake: If you need to stop at a red light or pull over to the side, you should press the clutch first. Then, as you approach the crosswalk, press the brake directly. This is because at lower speeds, the friction resistance between the tires and the ground increases. Pressing the brake first can cause the engine to stall. Brake before clutch: For manual transmission cars, when downshifting to reduce speed—for example, shifting from fourth gear to third, or from third gear to second before turning, making a U-turn, or stopping—you should press the brake first to slow down. Once the speed has dropped to the appropriate range, press the clutch to shift gears.
6
4
Share

Can part-time 4WD 4h turn?

Part-time 4WD 4h can turn, but it cannot turn on paved roads. Only on unpaved roads can the 4h mode turn. Below is relevant information: Specific reason: The main reason is that the turning radius of the front and rear wheels is different, so when the vehicle needs to turn, there needs to be a speed difference between the front and rear wheels. However, the power distribution of the front and rear axles in part-time 4WD is fixed, meaning there is no speed difference between the front and rear wheels. Therefore, on paved roads with good grip, one of the wheels cannot overcome the friction. Turning with part-time 4WD 4h on paved roads can easily cause rollover. Part-time 4WD: The structure of part-time 4WD is much simpler than full-time 4WD. Part-time 4WD has been implemented in the Jeep Willys, and it does not require strong electronic controls. The transfer case structure of part-time 4WD can be for semi-axles or solid axles.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.