What is luyuan?

1 Answers
Hannah
07/29/25 5:22pm
luyuan is a Luyuan electric vehicle. Below is an introduction to Luyuan electric vehicles: Core Technology: The Luyuan liquid-cooled motor innovatively injects insulating coolant inside the motor, providing liquid-cooled heat dissipation and ensuring durable power for up to 6 years. After prolonged riding, heat accumulates inside the motor, leading to decreased performance, higher power consumption, and even motor burnout. The liquid-cooled motor efficiently controls temperature, reducing motor heat to prevent high-temperature demagnetization and rust from water ingress, ensuring efficient operation for over 6 years. The motor is equipped with a built-in temperature control system and gas exchange system to ensure operational reliability. Fast Charging Technology: Ordinary chargers take over 8 hours to fully charge, which is time-consuming. Charging overnight can extend into late hours, and unsupervised charging poses potential safety hazards. The fast charging technology achieves 50% charge in 1 hour, 85% in 2 hours, and a full charge in 3 hours. It adopts the MAS charging mode, increasing charging speed by more than three times. The high-efficiency LLC circuit ensures a 92% efficiency rate for the AC/DC conversion module in the charger.
Was this review help?
16
2
Share
More Forum Discussions

Which province does the Tong E license plate belong to?

Tong E is not a real license plate number from any province in reality; it should be a fictional prop license plate number used in TV dramas. There is no Tong E license plate in real life. License plates are abbreviated as vehicle plates, and they serve as the identification numbers for vehicles, essentially acting as a car's ID card. A motor vehicle license plate number consists of a registration authority code and a plate number. The specific components are as follows: 1. The first character of a license plate is a Chinese character representing the abbreviated name of the province where the vehicle is registered; the second character is an English letter representing the code for the prefecture-level city where the vehicle is located. 2. The plate number consists of 5 characters, which can be Arabic numerals (0-9, totaling 10 digits) or a combination of Arabic numerals and English letters (A-Z, totaling 26 letters).
8
0
Share

At what point should car brake pads be replaced?

Brake pads need to be replaced under the following circumstances: 1. When the vehicle has traveled approximately 80,000 kilometers, the car brake pads will become relatively thin due to wear and tear, at which point new brake pads should be replaced to ensure driving safety. 2. Observe the thickness of the brake pads. Generally, new brake pads are about 2.5 centimeters thick. When the thickness of the brake pads decreases to approximately 0.5 centimeters, they need to be replaced. 3. Listen for sounds. Since the brake pads will rub against the braking system when braking, you can determine whether the braking system is functioning properly by listening to the sound when applying the brakes. If there are unusual noises, the brake pads should be inspected and replaced. 4. Determine whether the brakes are functioning properly by the feel of the brake pedal. If you notice that the brakes feel soft and lack stopping power, the brake pads need to be replaced.
4
2
Share

What are the symptoms of a faulty engine intake pressure sensor?

Engine intake pressure sensor failure symptoms include: the vehicle cannot start, and even if it does start, the driving speed will be unstable, with weak acceleration. The following is an introduction to the intake pressure sensor: 1. The intake pressure sensor, abbreviated as MAP. It connects to the intake manifold via a vacuum tube. It senses the vacuum changes in the intake manifold as the engine operates at different speeds and loads, then converts the internal resistance changes of the sensor into voltage signals for the ECU to adjust fuel injection and ignition timing. 2. In fuel-injected engines, the system that uses an intake pressure sensor to detect the amount of intake air is called a D-type injection system. The intake pressure sensor does not detect the intake air directly like an air flow sensor but uses indirect detection.
5
1
Share

Has the Karry K50 Been Discontinued?

Karry K50 has been discontinued. Below is relevant information about the Karry K50: 1. Exterior: The front grille of the Karry K50 not only features the classic vertical slat design but also supports an optional, more eye-catching three-horizontal-slat grille. The body cladding and side pillars are accented with black components, and the new model also offers an optional family-style arched chrome front grille for a more minimalist and dynamic look. The body cladding and side pillars are highlighted with black components, paired with multi-spoke chrome alloy wheels on the sides, giving it a more layered appearance compared to the current model. 2. Interior: The design style remains consistent with the current model, equipped with a three-spoke multifunction steering wheel. The dashboard also features silver decorative strips, and the layout of the button area has a certain sense of hierarchy. The 2018 model added ESP, a panoramic sunroof, cruise control, tire pressure monitoring, front radar, and dual airbags as standard on top of the original configuration.
12
0
Share

Where is the engine number located on a Volvo S80?

The engine number of a Volvo S80 is located under the front hood, inside the engine compartment. It typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be found through the following 4 ways: The vehicle's driving license will have the engine number printed on it, usually located on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number, however, refers to the production number of the engine, where each engine can only have one unique engine number, and no two engines will have the same number.
2
2
Share

How Long Does a New Car Stay in Inventory Before It's Considered a Stock Car?

Stock cars refer to vehicles that remain unsold in inventory. There is no legal definition or regulation regarding stock cars or their inventory duration. Typically, a car is considered a stock vehicle if it remains unsold for 3 to 6 months after leaving the factory. Some may exceed 6 months or even a year, while others may remain in inventory for several years. The production date of the vehicle can be found on the car's nameplate, usually located on the side of the passenger seat or in the engine compartment. The duration from the production date to the current date is the inventory time. Here are the types of stock cars: 1. Those that spend their inventory period in the manufacturer's warehouse. 2. Those that spend their inventory period in the dealer's warehouse.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.