What is Kung Fu Gear?

What Causes Jerking When Accelerating in a Sedan?

The reasons for jerking when accelerating in a sedan are: 1. Excessive carbon buildup in the throttle body, fuel injectors, and intake manifold; 2. Poor fuel quality leading to incomplete combustion; 3. Faulty spark plugs or ignition coils. Driving precautions for sedans include: 1. Avoid coasting in neutral; 2. Do not shift gears before the vehicle comes to a complete stop; 3. Warm up the vehicle properly; 4. Engage the P (Park) gear and apply the handbrake when parking for extended periods. Fueling precautions for sedans include: 1. Refuel in the morning or evening to avoid direct sunlight at noon; 2. Add fresh fuel before long-distance trips; 3. Do not exceed the fuel tank's maximum capacity; 4. Turn off the engine and power when parking; 5. No smoking during refueling.

1

2

Share

How Often Should a BMW Be Serviced?

BMW vehicles should be serviced approximately every 10,000 kilometers. The purpose of car maintenance is to filter impurities from the engine oil and gasoline, preventing these contaminants from entering the engine and affecting its normal operation. Regularly replacing these components can effectively extend the engine's lifespan, maintain the vehicle's cleanliness, ensure normal technical conditions, eliminate potential hazards, prevent malfunctions, and slow down the deterioration process. Taking the 2021 BMW 3 Series as an example, its body dimensions are: length 4719mm, width 1827mm, height 1459mm, wheelbase 2851mm, fuel tank capacity 59 liters, and the body structure is a 4-door, 5-seater sedan.

5

Share

How to Adjust the Time on a Levin?

To adjust the time on a Levin: 1. Locate the vehicle settings button on the central control screen; 2. Find the time settings to adjust the dashboard time. The Levin's body dimensions are: length 4640mm, width 1780mm, height 1455mm, with a wheelbase of 2700mm and a fuel tank capacity of 50 liters. The Levin is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116ps and a maximum power of 85kw, paired with a continuously variable transmission. Its drivetrain is front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension featuring an E-type multi-link independent suspension.

4

3

Share

How to Turn on the High Beam on a Cruze?

The method to turn on the high beam on a Cruze is: push the left control lever towards the driver's direction to activate it. The high beam emits parallel light, which is more concentrated and brighter, allowing it to illuminate distant and high objects. The dimensions of the Cruze are: length 4450mm, width 1807mm, height 1459mm, with a wheelbase of 2700mm and a fuel tank capacity of 52 liters. The Cruze is equipped with a 1.5L naturally aspirated engine and a 6-speed automatic transmission, delivering a maximum power of 84 kilowatts and a maximum torque of 146 Newton-meters. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using a torsion beam non-independent suspension.

18

3

Share

Where is the thermostat located in the 8th generation Sonata?

The thermostat in the 8th generation Sonata is located at the water pump inlet. The thermostat is a valve that controls the flow path of the coolant and serves as an automatic temperature-regulating device. Typically, the thermostat contains a temperature-sensing component that opens or closes the flow of air, gas, or liquid through thermal expansion or contraction. The 8th generation Sonata measures 4820mm in length, 1835mm in width, and 1475mm in height, with a wheelbase of 2795mm. In terms of features, the 8th generation Sonata is equipped not only with a panoramic sunroof but also with advanced technological configurations rarely seen in mid-to-high-end models, such as the VSM vehicle stability control system, TPMS tire pressure monitoring system, HAC hill-start assist system, and ESS emergency brake reminder system.

9

1

Share

What are the symptoms of a bad axle shaft?

The symptoms of a bad axle shaft are: abnormal vibration occurs when the car is driving, and it can also cause abnormal noises while the car is in motion. If the axle shaft is damaged, it needs to be replaced immediately. The axle shaft is the component that transmits power to the wheels. Without the axle shaft, power cannot be transmitted to the wheels. The axle shaft may become deformed or fractured. If the axle shaft is fractured, it needs to be replaced. If it is deformed, it also requires replacement. The axle shaft has a CV joint, which is also relatively prone to damage. There is a rubber dust boot outside the CV joint. This rubber dust boot prevents dust from entering the CV joint and also prevents the lubricating oil inside the CV joint from leaking.

11

4

Share

What is Kung Fu Gear?

What Causes Jerking When Accelerating in a Sedan?

How Often Should a BMW Be Serviced?

How to Adjust the Time on a Levin?

How to Turn on the High Beam on a Cruze?

Where is the thermostat located in the 8th generation Sonata?

What are the symptoms of a bad axle shaft?

What car has two overlapping Rs?

Is the Envision equipped with a fire extinguisher as standard?

What Causes Manual Transmission Car to Shudder When Starting?

How Many Versions of the Land Rover Range Rover Are There?