What is Keyis Car?

1 Answers
LePaige
07/29/25 4:33pm
In fact, Keyis is not a car, nor is there any car brand named Keyis. The only thing related to cars is the Keyis steering wheel, which is a quick-release steering wheel specifically designed for competitive racing. Since modified steering wheels are universal, any steering wheel that matches the base can be installed. More details are as follows: 1. Quick-release steering wheels are mostly used in competitive racing. To reduce weight and simplify the structure, such steering wheels are not equipped with airbags or other electronic control systems. 2. If ordinary vehicles are also modified with quick-release steering wheels, in the event of an accident, the driver will not be protected by airbags, and the consequences could be unimaginable. Additionally, unauthorized modification of steering wheels is also prohibited by national traffic laws. 3. First of all, not only are the body frames of competitive racing cars specially reinforced, but the drivers in races are also fully equipped with helmets, racing suits, gloves made of special scratch-resistant materials, and the vehicles use four-point seat belts that offer better protection.
Was this review help?
18
4
Share
More Forum Discussions

What does 'Please Service Power Steering' mean?

Please Service Power Steering indicates a power steering system malfunction. The causes of power steering failure include: 1. Excessive air in the power steering system; 2. Foreign objects in the steering hydraulic lines causing the steering pump flow control valve to stick; 3. Loose connections in the power steering system leading to steering fluid leakage; 4. Excessive wear of the steering gear piston cylinder, poor oil seal performance, or control valve sticking/damage. Power steering systems are classified into mechanical hydraulic power steering, electro-hydraulic power steering, and electric power steering. The principle of mechanical hydraulic power steering involves converting part of the engine's power output into hydraulic pump pressure to provide auxiliary force to the steering system, enabling tire rotation.
19
4
Share

Where is the Roewe 750 cabin air filter located?

The cabin air filter of the Roewe 750 is located under the wiper cover plate on the right side of the front windshield in the front passenger area. The replacement method is as follows: 1. Open the engine hood; 2. Remove the wiper cover plate; 3. Take out the old cabin air filter and replace it with the new one. The dimensions of the Roewe 750 are: length 4865mm, width 1765mm, height 1422mm, with a wheelbase of 2849mm and a minimum ground clearance of 10mm. The Roewe 750 is equipped with a 1.8T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 160PS, maximum torque of 215Nm, maximum power of 118kW, maximum power speed of 5500rpm, and maximum torque range of 2500 to 4500rpm. It is paired with a 5-speed automatic transmission.
10
2
Share

Where is the Peugeot 301's Cabin Air Filter Located?

The cabin air filter of the Peugeot 301 is located in the inner layer of the glove compartment on the left side. The replacement method is as follows: Press inward at the center position of the glove compartment to access the cabin air filter, then remove the old filter and install a new one. The Peugeot 301 has the following dimensions: length 4442mm, width 1748mm, height 1476mm, wheelbase 2652mm, minimum ground clearance 120mm, and curb weight 1155kg. It is equipped with a 1.6L inline 4-cylinder turbocharged engine producing maximum power of 117PS, peak torque of 150Nm, and maximum output of 86kW at 6000rpm. The maximum torque is achieved at 4000rpm, paired with a 6-speed manual transmission.
12
3
Share

What is the purpose of tire rotation?

The purpose of tire rotation is to achieve even tire wear, extend tire service life, prevent abnormal tire wear, and improve driving safety. The methods for tire rotation are: 1. For bias-ply tires, swap the tires on the same axle to ensure even wear on both sides; 2. For radial tires, rotate them within the same side of the vehicle. Tire maintenance methods include: 1. Maintain correct tire pressure; 2. Regularly inspect tires for bulges, cracks, cuts, punctures, and abnormal wear; 3. Check the tire surface for stones, nails, or other hard objects and clean them promptly; 4. Perform four-wheel rotation.
19
4
Share

What are the maintenance methods for car wipers during use?

Car wiper maintenance methods during use are: 1. When using wipers to remove dust from the windshield on sunny days, be sure to spray windshield washer fluid and avoid dry wiping; 2. If there are other stubborn, hard contaminants on the glass, clean them manually and do not force the wipers to remove them directly; 3. When lifting the wiper blades during car washing or routine cleaning, hold the backbone of the wiper blade straight and gently return it when putting it back, avoiding snapping the wiper blade back suddenly; 4. In winter, first use an ice scraper to remove ice chips from the windshield surface to avoid increasing the burden on the wipers; 5. If contaminants on the wipers are difficult to clean or the wipers themselves have problems, repair them promptly.
3
2
Share

What are the reasons for a car starting and then stalling on its own?

The reasons for a car starting and then stalling on its own are: 1. Insufficient fuel, aging or clogged fuel pump, malfunctioning fuel pressure regulator, or fuel leakage with air or water contamination; 2. Worn oil pump, oil pressure below the starting threshold, issues with the oil pressure sensor or safety valve; 3. Faulty high-tension wires, spark plugs, or ignition coils; 4. Engine malfunction; 5. Weak battery, loose battery terminals, faulty ignition switch, aging or poor contact in the ignition circuit; 6. Abnormalities in other signal sources, preventing correct and timely transmission of signals to the control computer.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.